text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

Kinematic Fixture Plate 400x400 mm (M8)
Kinematic Fixture Plate 400x400 mm (M8)
ID: KPT-400__400
Precio:  £1,474.88
Descripción rápida:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Referencia:  KPT-400/400
  • Compatibilidad placas:  KB-300/300, KB-UNIVL
En Stock - Envío 1-2 Días
Kinematic Base for Fixture Plate 300x300mm
Kinematic Base for Fixture Plate 300x300mm
ID: KB-250__250
Precio:  £661.76
Descripción rápida:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Referencia:  KB-250/250
  • Compatibilidad placas:  KPP-300/300, KPT-300/300
En Stock - Envío 1-2 Días
Kinematic Base for Fixture Plate 400x400mm
Kinematic Base for Fixture Plate 400x400mm
ID: KB-300__300
Precio:  £713.68
Descripción rápida:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Referencia:  KB-300/300
  • Compatibilidad placas:  KPP-400/400, KPT-400/400
En Stock - Envío 1-2 Días
Kinematic Fixture Plate 400x400mm (Plain)
Kinematic Fixture Plate 400x400mm (Plain)
ID: KPP-400__400
Precio:  £652.08
Descripción rápida:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Referencia:  KPP-400/400
  • Compatibilidad placas:  KB-300/300, KB-UNIVL
En Stock - Envío 1-2 Días
Kinematic Fixture Plate 500x500 mm (M8)
Kinematic Fixture Plate 500x500 mm (M8)
ID: KPT-500__500
Precio:  £1,906.08
Descripción rápida:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Referencia:  KPT-500/500
  • Compatibilidad placas:  KB-400/400, KB-UNIVL
En Stock - Envío 1-2 Días
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Precio:  £50.16
Descripción rápida:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Referencia:  FX-SPRING
  • Rosca:  Sin rosca
En Stock - Envío 1-2 Días
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Precio:  £9.68
Descripción rápida:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Referencia:  FX-THUMB
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  £18.48
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/20
  • Longitud:  20 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  £84.48
Descripción rápida:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Referencia:  FX-PR30HINGE
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Precio:  £26.40
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/100
  • Longitud:  100 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Precio:  £59.84
Descripción rápida:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Referencia:  FX-SUB45/120
  • Tamaño:  120 x 45 x 12 mm
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Precio:  £1,495.12
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-160SS3
  • Diámetro exterior mandril (D1):  160mm
  • Area de fijación exterior (A):  1 - 150mm
  • Area de fijación interior (I):  34 - 174mm
  • Material:  Acero inoxidable
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  £943.36
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-70SS3
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
En Stock - Envío 1-2 Días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  £932.80
Descripción rápida: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-70SS3-NF
  • Diámetro exterior mandril (D1):  70mm
  • Area de fijación exterior (A):  1 - 71mm
  • Area de fijación interior (I):  18 - 66mm
  • Material:  Acero inoxidable
Tiempo de entrega 10-15 días
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Precio:  £1,424.72
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-160SS3-NF
  • Diámetro exterior mandril (D1):  160mm
  • Area de fijación exterior (A):  1 - 150mm
  • Area de fijación interior (I):  34 - 174mm
  • Material:  Acero inoxidable
Tiempo de entrega 10-15 días
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Precio:  £1,144.00
Descripción rápida:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125AL6-NF
  • Diámetro exterior mandril (D1):  125mm
  • Area de fijación:  5 - 156mm
  • Material:  Aluminio
  • Fijación (G):  M5
Tiempo de entrega 10-15 días
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Precio:  £18.48
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/30
  • Longitud:  30 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Precio:  £22.00
Descripción rápida:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Referencia:  FX-SO/PIN
  • Longitud:  20 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Precio:  £26.40
Descripción rápida:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Referencia:  FX-SLIDER
  • Rosca:  M8
En Stock - Envío 1-2 Días
Pillar 30x30x200mm
Pillar 30x30x200mm
ID: FX-PR30__200
Precio:  £45.76
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/200
  • Tamaño:  30 x 30 x 200 mm
En Stock - Envío 1-2 Días