text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  €480.00
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Referencia:  GB0122-0019
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  €560.00
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60
Tiempo de entrega 10-15 días
3-Jaw 125 Inside Clamping Set (Stainless Steel)
3-Jaw 125 Inside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-I
Precio:  €418.00
Descripción rápida: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Referencia:  FC-JS-125SS3-I
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
3-Jaw 125 Outside Clamping Set (Stainless Steel)
3-Jaw 125 Outside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-E
Precio:  €418.00
Descripción rápida: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Referencia:  FC-JS-125SS3-E
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
6-Jaw 125 Inside/Outside Clamping Set (AL)
6-Jaw 125 Inside/Outside Clamping Set (AL)
ID: FC-JS-125AL6-IE
Precio:  €730.00
Descripción rápida: 

6-jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø125 mm.
  • Referencia:  FC-JS-125AL6-IE
  • Material:  Aluminium, hard anodised
Tiempo de entrega 10-15 días
6-Jaw 160 Inside/Outside Clamping Set (AL)
6-Jaw 160 Inside/Outside Clamping Set (AL)
ID: FC-JS-160AL6-IE
Precio:  €1,040.00
Descripción rápida: 

6-Jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø160 mm.
  • Referencia:  FC-JS-160AL6-IE
  • Material:  Aluminium, hard anodised
Tiempo de entrega 10-15 días
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Precio:  €27.00
Descripción rápida:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Referencia:  FX-TOOLS
En Stock - Envío 1-2 Días
Standoff Support (M8)
Standoff Support (M8)
ID: FX-SO__SUPP
Precio:  €22.00
Descripción rápida:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Referencia:  FX-SO/SUPP
  • Longitud:  10 mm
  • Diámetro:  15 mm
En Stock - Envío 1-2 Días
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Precio:  €18.00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/30
  • Longitud:  30 mm
  • Diámetro:  20 mm
En Stock - Envío 1-2 Días
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Precio:  €95.00
Descripción rápida:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Referencia:  FX-UNI/JOINT
  • Rosca:  M8
En Stock - Envío 1-2 Días
Vee Locator
Vee Locator
ID: FX-VEE
Precio:  €77.00
Descripción rápida:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Referencia:  FX-VEE
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Precio:  €22.00
Descripción rápida:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Referencia:  FX-SO/MAG
  • Longitud:  20 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Precio:  €49.00
Descripción rápida:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Referencia:  FX-PR30PLATE
  • Tamaño:  130 x 30 mm
En Stock - Envío 1-2 Días
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Precio:  €40.00
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/100
  • Tamaño:  30 x 30 x 100 mm
En Stock - Envío 1-2 Días
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Precio:  €49.00
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Referencia:  FX-PR30/250
  • Tamaño:  30 x 30 x 250 mm
En Stock - Envío 1-2 Días
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Precio:  €38.00
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/50
  • Tamaño:  30 x 30 x 50 mm
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 30 mm)
Standoff (D = 16 mm / L = 30 mm)
ID: FX-SO16__30
Precio:  €18.00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/30
  • Longitud:  30 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Precio:  €22.00
Descripción rápida:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Referencia:  FX-SO/PIN
  • Longitud:  20 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Precio:  €26.00
Descripción rápida:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Referencia:  FX-SLIDER
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff (D = 20 mm / L = 50 mm)
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Precio:  €19.00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/50
  • Longitud:  50 mm
  • Diámetro:  20 mm
En Stock - Envío 1-2 Días