text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  436,00 £
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Referencia:  GB0122-0019
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  509,00 £
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60
Tiempo de entrega 10-15 días
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6
Precio:  1.198,00 £
Descripción rápida: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Referencia:  FC-125AL6
  • Diámetro exterior mandril (D1):  125
  • Area de fijación:  5 - 156
  • Material:  Aluminio
  • Fijación:  M4 / M8
En Stock - Envío 1-2 Días
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6-NF
Precio:  1.036,00 £
Descripción rápida: 

6-jaw chuck made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Referencia:  FC-125AL6-NF
  • Diámetro exterior mandril (D1):  125
  • Area de fijación:  5 - 156
  • Material:  Aluminio
  • Fijación (G):  M5
Tiempo de entrega 10-15 días
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
ID: FC-125SS3-NF
Precio:  1.036,00 £
Descripción rápida: 

3-jaw chuck made of stainless steel with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Referencia:  FC-125SS3-NF
  • Diámetro exterior mandril (D1):  125
  • Area de fijación exterior (A):  1 - 126
  • Area de fijación interior (I):  32 - 122
  • Material:  Acero inoxidable
Tiempo de entrega 10-15 días
3-Jaw 125 Inside Clamping Set (Stainless Steel)
3-Jaw 125 Inside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-I
Precio:  380,00 £
Descripción rápida: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 125 mm.
  • Referencia:  FC-JS-125SS3-I
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
3-Jaw 160 Inside Clamping Set (Stainless Steel)
3-Jaw 160 Inside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-I
Precio:  431,00 £
Descripción rápida: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 160 mm.
  • Referencia:  FC-JS-160SS3-I
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
3-Jaw 70 Outside Clamping Set (Stainless Steel)
3-Jaw 70 Outside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-E
Precio:  331,00 £
Descripción rápida: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 70 mm.
  • Referencia:  FC-JS-70SS3-E
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
3-Jaw 125 Outside Clamping Set (Stainless Steel)
3-Jaw 125 Outside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-E
Precio:  380,00 £
Descripción rápida: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 125 mm.
  • Referencia:  FC-JS-125SS3-E
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
3-Jaw 160 Outside Clamping Set (Stainless Steel)
3-Jaw 160 Outside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-E
Precio:  431,00 £
Descripción rápida: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 160 mm.
  • Referencia:  FC-JS-160SS3-E
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
6-Jaw 125 Inside/Outside Clamping Set (AL)
6-Jaw 125 Inside/Outside Clamping Set (AL)
ID: FC-JS-125AL6-IE
Precio:  664,00 £
Descripción rápida: 

6-jaw clamping set for internal and external clamping. Made of aluminium with a hard-coated surface and positioning holes for locating and stop pins. Compatible with Ø 125 mm aluminium 6-jaw chucks.
  • Referencia:  FC-JS-125AL6-IE
  • Material:  Aluminium, hard anodised
Tiempo de entrega 10-15 días
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
ID: FC-PS-125AL6
Precio:  755,00 £
Descripción rápida: 

Clamping and stop pin set for Hexagon 6-jaw chucks Ø125 mm. Designed for the precise and repeatable positioning of a wide variety of workpieces while providing optimal accessibility during measurement.
  • Referencia:  FC-PS-125AL6
Tiempo de entrega 10-15 días
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
ID: FC-PS-160AL6
Precio:  855,00 £
Descripción rápida: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / D = Ø160 mm).
  • Referencia:  FC-PS-160AL6
Tiempo de entrega 10-15 días
Basic Jaw Set (Aluminium)
Basic Jaw Set (Aluminium)
ID: FC-JS-240AL3-I
Precio:  927,00 £
Descripción rápida: 

Basic jaw set made of aluminum with hard-coated surface. Compatible with 3-jaw chucks made of aluminium with Ø240 mm.
  • Referencia:  FC-JS-240AL3-I
  • Material:  Aluminium with hard coated surface
Tiempo de entrega 10-15 días
3-Jaw 70 Inside Clamping Set (Stainless Steel)
3-Jaw 70 Inside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-I
Precio:  331,00 £
Descripción rápida: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø 70 mm.
  • Referencia:  FC-JS-70SS3-I
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
6-Jaw 160 Inside/Outside Clamping Set (AL)
6-Jaw 160 Inside/Outside Clamping Set (AL)
ID: FC-JS-160AL6-IE
Precio:  945,00 £
Descripción rápida: 

6-Jaw clamping set for inside and outside clamping. Made of aluminum with hard-coated surface and positioning holes for clamping and stop pins. Compatible with 6-jaw chucks made of aluminum Ø160 mm.
  • Referencia:  FC-JS-160AL6-IE
  • Material:  Aluminium, hard anodised
Tiempo de entrega 10-15 días
Reversible Top Jaw Set for Inside/Outside Clamping
Reversible Top Jaw Set for Inside/Outside Clamping
ID: FC-JS-240SS3-IE
Precio:  1.018,00 £
Descripción rápida: 

Reversible top jaw set for inside and outside clamping. Made of stainless steel, vacuum hardened, ground. Compatible with 3-jaw chucks made of Aluminium with Ø240 mm.
  • Referencia:  FC-JS-240SS3-IE
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
Standoff (D = 16 mm / L = 50 mm)
Standoff (D = 16 mm / L = 50 mm)
ID: FX-SO16__50
Precio:  17,00 £
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/50
  • Rosca:  M8
  • Diámetro:  16 mm
  • Longitud:  50 mm
En Stock - Envío 1-2 Días
Standoff (D = 20 mm / L = 50 mm)
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Precio:  17,00 £
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/50
  • Rosca:  M8
  • Diámetro:  20 mm
  • Longitud:  50 mm
En Stock - Envío 1-2 Días
Spring Plunger
Spring Plunger
ID: FX-PLUNGER
Precio:  86,00 £
Descripción rápida:  The spring plunger exerts low forces to hold sensible parts in position.
  • Referencia:  FX-PLUNGER
  • Rosca:  M8
En Stock - Envío 1-2 Días