text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  560,00 €
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60
Tiempo de entrega 10-15 días
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6
Precio:  1.318,00 €
Descripción rápida: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Referencia:  FC-125AL6
  • Diámetro exterior mandril (D1):  125
  • Area de fijación:  5 - 156
  • Material:  Aluminio
  • Fijación:  M4 / M8
En Stock - Envío 1-2 Días
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6-NF
Precio:  1.140,00 €
Descripción rápida: 

6-jaw chuck made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Referencia:  FC-125AL6-NF
  • Diámetro exterior mandril (D1):  125
  • Area de fijación:  5 - 156
  • Material:  Aluminio
  • Fijación (G):  M5
Tiempo de entrega 10-15 días
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
ID: FC-125SS3-NF
Precio:  1.140,00 €
Descripción rápida: 

3-jaw chuck made of stainless steel with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Referencia:  FC-125SS3-NF
  • Diámetro exterior mandril (D1):  125
  • Area de fijación exterior (A):  1 - 126
  • Area de fijación interior (I):  32 - 122
  • Material:  Acero inoxidable
Tiempo de entrega 10-15 días
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Precio:  279,00 €
Descripción rápida: 

The base plate guide rail provides precise alignment and positioning of acrylic base plates at any side of the measuring volume of a multisensor CMM.

  • Referencia:  FV-GUIDE480
  • Compatibilidad placas:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En Stock - Envío 1-2 Días
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Precio:  10,00 €
Descripción rápida:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FV-SO8/20
  • Rosca:  M4
  • Diámetro:  8 mm
  • Longitud:  20 mm
En Stock - Envío 1-2 Días
Adjustable Cone (M4)
ID: FV-CONEADJ
Precio:  22,00 €
Descripción rápida:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Referencia:  FV-CONEADJ
  • Rosca:  M4
En Stock - Envío 1-2 Días
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Precio:  819,00 €
Descripción rápida: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.

  • Referencia:  FX-BP300/300
  • Rosca:  M8
En Stock - Envío 1-2 Días
Spring Pusher Standoff Clamp (D = 8 mm / L = 10 mm)
ID: FV-LATSML
Precio:  39,00 €
Descripción rápida: 

The spring-loaded standoff securely holds delicate components in position using lateral clamping force.

  • Referencia:  FV-LATSML
  • Rosca:  M4
  • Diámetro:  8 mm
  • Longitud:  10 mm
En Stock - Envío 1-2 Días
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Precio:  1.145,00 €
Descripción rápida: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.

  • Referencia:  FX-BP400/400
  • Rosca:  M8
En Stock - Envío 1-2 Días
Acryl Baseplate 200x200x10mm(M4) - Perimeter Pattern
ID: FV-BP200__200P
Precio:  594,00 €
Descripción rápida:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200P
  • Rosca:  M4
En Stock - Envío 1-2 Días
Support Stop (M8)
ID: FX-SUP__STOP
Precio:  87,00 €
Descripción rápida: 

The support stop is used to secure workpieces with adjustable clamping force. By reversing the support stop, it can also be used as a compact V-block.

  • Referencia:  FX-SUP/STOP
  • Rosca:  M8
En Stock - Envío 1-2 Días
Spring Pusher Standoff Clamp (D = 16 mm / L = 20 mm)
ID: FX-LATMED
Precio:  58,00 €
Descripción rápida: 

The spring-loaded standoff securely holds delicate components in position using lateral clamping force.

  • Referencia:  FX-LATMED
  • Rosca:  M8
  • Diámetro:  16 mm
  • Longitud:  20 mm
En Stock - Envío 1-2 Días
Tension Post (M8)
ID: FX-POST
Precio:  27,00 €
Descripción rápida: 

A tension post is designed for use with tension and spring clamps and can be mounted on other Swift-Fix M8 components.

  • Referencia:  FX-POST
  • Rosca:  M8
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Precio:  19,00 €
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/20
  • Rosca:  M8
  • Diámetro:  20 mm
  • Longitud:  20 mm
En Stock - Envío 1-2 Días
6-Jaw Chuck with Flange (Aluminium / Ø 160 mm)
ID: FC-160AL6
Precio:  1.565,00 €
Descripción rápida: 

6-Jaw chuck with flange made of aluminium with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Referencia:  FC-160AL6
  • Diámetro exterior mandril (D1):  160
  • Area de fijación:  5 - 196
  • Material:  Aluminio
  • Fijación:  M4 / M8
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
ID: FC-240AL3
Precio:  3.715,00 €
Descripción rápida: 

3-jaw chuck with flange made of aluminium with an outside diameter of 240 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Referencia:  FC-240AL3
  • Diámetro exterior mandril (D1):  240
  • Area de fijación exterior (A):  1 - 288
  • Area de fijación interior (I):  35 - 295
  • Material:  Aluminio
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / Ø 70 mm)
ID: FC-70SS3
Precio:  987,00 €
Descripción rápida: 

3-jaw chuck with flange made of stainless steel with an outside diameter of 70 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Referencia:  FC-70SS3
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
En Stock - Envío 1-2 Días
Universal Joint
ID: FX-UNI__JOINT
Precio:  95,00 €
Descripción rápida:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Referencia:  FX-UNI/JOINT
  • Rosca:  M8
En Stock - Envío 1-2 Días
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Precio:  19,00 €
Descripción rápida:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Referencia:  FX-CAPM8/20
  • Rosca:  M8
En Stock - Envío 1-2 Días