text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  480,00 CHF
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Referencia:  GB0122-0019
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  560,00 CHF
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60
Tiempo de entrega 10-15 días
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Precio:  18,00 CHF
Descripción rápida:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Referencia:  FV-SOSUP
  • Longitud:  6 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
ID: FX-BP400__400
Precio:  1.145,00 CHF
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP400/400
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  19,00 CHF
Descripción rápida:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Referencia:  FV-SO/PIN
  • Longitud:  10 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  52,00 CHF
Descripción rápida:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Referencia:  FV-CNRBRKT
En Stock - Envío 1-2 Días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  930,00 CHF
Descripción rápida: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-70SS3-NF
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
Tiempo de entrega 10-15 días
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Precio:  638,00 CHF
Descripción rápida:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200F
  • Rosca:  M4
En Stock - Envío 1-2 Días
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Precio:  142,00 CHF
Descripción rápida:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Referencia:  FX-ARM
  • Rosca:  M8
En Stock - Envío 1-2 Días
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  18,00 CHF
Descripción rápida:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Referencia:  FV-SLIDER
  • Rosca:  M4
En Stock - Envío 1-2 Días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  15,00 CHF
Descripción rápida:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Referencia:  FV-CONE
  • Rosca:  M4
En Stock - Envío 1-2 Días
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
ID: FC-PS-160AL6
Precio:  940,00 CHF
Descripción rápida: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / D = Ø160 mm).
  • Referencia:  FC-PS-160AL6
Tiempo de entrega 10-15 días
Kinematic Fixture Plate 300x300x16 mm (M8)
Kinematic Fixture Plate 300x300x16 mm (M8)
ID: KPT-300__300
Precio:  880,00 CHF
Descripción rápida:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Referencia:  KPT-300/300
  • Compatibilidad placas:  KB-250/250, KB-UNIVL
En Stock - Envío 1-2 Días
Kinematic Base for Fixture Plate 500x500mm
Kinematic Base for Fixture Plate 500x500mm
ID: KB-400__400
Precio:  1.102,00 CHF
Descripción rápida:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Referencia:  KB-400/400
  • Compatibilidad placas:  KPP-500/500, KPT-500/500
En Stock - Envío 1-2 Días
Universal Kinematic Fixture Base
Universal Kinematic Fixture Base
ID: KB-UNIVL
Precio:  745,00 CHF
Descripción rápida:  The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
  • Referencia:  KB-UNIVL
  • Compatibilidad placas:  KPP-300/300, KPT-300/300, KPP-400/400, KPT-400/400, KPP-500/500, KPT-500/500
En Stock - Envío 1-2 Días
Kinematic Fixture Plate 400x400x16 mm (M8)
Kinematic Fixture Plate 400x400x16 mm (M8)
ID: KPT-400__400
Precio:  1.588,00 CHF
Descripción rápida:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Referencia:  KPT-400/400
  • Compatibilidad placas:  KB-300/300, KB-UNIVL
En Stock - Envío 1-2 Días
Kinematic Base for Fixture Plate 300x300mm
Kinematic Base for Fixture Plate 300x300mm
ID: KB-250__250
Precio:  660,00 CHF
Descripción rápida:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Referencia:  KB-250/250
  • Compatibilidad placas:  KPP-300/300, KPT-300/300
En Stock - Envío 1-2 Días
Kinematic Base for Fixture Plate 400x400mm
Kinematic Base for Fixture Plate 400x400mm
ID: KB-300__300
Precio:  768,00 CHF
Descripción rápida:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Referencia:  KB-300/300
  • Compatibilidad placas:  KPP-400/400, KPT-400/400
En Stock - Envío 1-2 Días
Kinematic Fixture Plate 400x400mm (Plain)
Kinematic Fixture Plate 400x400mm (Plain)
ID: KPP-400__400
Precio:  650,00 CHF
Descripción rápida:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Referencia:  KPP-400/400
  • Compatibilidad placas:  KB-300/300, KB-UNIVL
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Precio:  1.220,00 CHF
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-125SS3
  • Diámetro exterior mandril (D1):  125
  • Area de fijación exterior (A):  1 - 126
  • Area de fijación interior (I):  32 - 122
  • Material:  Acero inoxidable
En Stock - Envío 1-2 Días