text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo

Catálogo

Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Precio:  605,00 CHF
Descripción rápida:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200C
  • Rosca:  M4
En Stock - Envío 1-2 Días
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Precio:  22,00 CHF
Descripción rápida:  The angle block slider enables users to position elements horizontally on the base plate.
  • Referencia:  FV-ANGSLIDER
  • Rosca:  M4
En Stock - Envío 1-2 Días
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Precio:  1.642,00 CHF
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP500/500
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  19,00 CHF
Descripción rápida: 

Standoffs with pins enable precise positioning and secure support of workpieces without restricting access to relevant measurement areas.
  • Referencia:  FV-SO/PIN
  • Rosca:  M4
  • Diámetro:  8 mm
  • Longitud:  10 mm
En Stock - Envío 1-2 Días
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  52,00 CHF
Descripción rápida:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Referencia:  FV-CNRBRKT
En Stock - Envío 1-2 Días
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Precio:  129,00 CHF
Descripción rápida:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Referencia:  FX-CLAMP
  • Rosca:  M8
En Stock - Envío 1-2 Días
Vee Block Single
Vee Block Single
ID: FV-VEE
Precio:  32,00 CHF
Descripción rápida:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Referencia:  FV-VEE
En Stock - Envío 1-2 Días
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Precio:  19,00 CHF
Descripción rápida:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Referencia:  FV-POST
  • Rosca:  M4
En Stock - Envío 1-2 Días
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Precio:  638,00 CHF
Descripción rápida:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200F
  • Rosca:  M4
En Stock - Envío 1-2 Días
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Precio:  142,00 CHF
Descripción rápida:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Referencia:  FX-ARM
  • Rosca:  M8
En Stock - Envío 1-2 Días
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  18,00 CHF
Descripción rápida:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Referencia:  FV-SLIDER
  • Rosca:  M4
En Stock - Envío 1-2 Días
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  18,00 CHF
Descripción rápida:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Referencia:  FV-SO/MAG
  • Rosca:  M4
  • Diámetro:  8 mm
  • Longitud:  10 mm
En Stock - Envío 1-2 Días
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Precio:  46,00 CHF
Descripción rápida:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Referencia:  FV-SPRING
  • Rosca:  M4
En Stock - Envío 1-2 Días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  15,00 CHF
Descripción rápida:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Referencia:  FV-CONE
  • Rosca:  M4
En Stock - Envío 1-2 Días
3-Jaw 125 Inside Clamping Set (Stainless Steel)
3-Jaw 125 Inside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-I
Precio:  418,00 CHF
Descripción rápida: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Referencia:  FC-JS-125SS3-I
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
3-Jaw 160 Inside Clamping Set (Stainless Steel)
3-Jaw 160 Inside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-I
Precio:  474,00 CHF
Descripción rápida: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.
  • Referencia:  FC-JS-160SS3-I
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
3-Jaw 70 Outside Clamping Set (Stainless Steel)
3-Jaw 70 Outside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-E
Precio:  364,00 CHF
Descripción rápida: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø70 mm.
  • Referencia:  FC-JS-70SS3-E
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
3-Jaw 160 Outside Clamping Set (Stainless Steel)
3-Jaw 160 Outside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-E
Precio:  474,00 CHF
Descripción rápida: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.
  • Referencia:  FC-JS-160SS3-E
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
ID: FC-PS-125AL6
Precio:  830,00 CHF
Descripción rápida: 

Clamping and stop pin set for 125 mm 6-jaw chuck for precise positioning and secure fixation of workpieces.
  • Referencia:  FC-PS-125AL6
Tiempo de entrega 10-15 días
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
ID: FC-PS-160AL6
Precio:  940,00 CHF
Descripción rápida: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / D = Ø160 mm).
  • Referencia:  FC-PS-160AL6
Tiempo de entrega 10-15 días