text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM
  4. Medios de sujección

Medios de sujección

Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Precio:  €50.00
Descripción rápida:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Referencia:  FX-SPRING
  • Rosca:  Sin rosca
En Stock - Envío 1-2 Días
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Precio:  €10.00
Descripción rápida:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Referencia:  FX-THUMB
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  €18.00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/20
  • Longitud:  20 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Precio:  €84.00
Descripción rápida:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Referencia:  FX-PR30HINGE
En Stock - Envío 1-2 Días
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Precio:  €33.00
Descripción rápida:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Referencia:  FX-CTMED
  • Rosca:  Sin rosca
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Precio:  €26.00
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/100
  • Longitud:  100 mm
  • Diámetro:  16 mm
En Stock - Envío 1-2 Días
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Precio:  €33.00
Descripción rápida:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Referencia:  FX-M8SPRGNUT
En Stock - Envío 1-2 Días
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Precio:  €5,330.00
Descripción rápida:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Referencia:  GB0096-2001
  • Compatibilidad CMM:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Compatibilidad del software:  PC-DMIS (V2016 y superiores) , QUINDOS (Q7R18351 y superiores)
  • Tiempos de ejecución:  Comprobación de longitud: 20 Minutos, Comprobación de anillo: 5 Minutos, Comprobación de esfera: 5 Minutos, Comprobación del cabezal indexable / sensor: 10 Minutos
  • Dimensiones:  Barra de longitud = 300 mm, Diametro del anillo = 25 mm, Diametro de la esfera = 25 mm
Entrega > 25 días
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Precio:  €8,550.00
Descripción rápida: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Referencia:  GB0122-1000
  • Compatibilidad:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Entrega > 25 días
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  €930.00
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP300/400
  • Rosca:  M8
En Stock - Envío 1-2 Días
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Precio:  €47.00
Descripción rápida:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Referencia:  FV-VEETWIN
En Stock - Envío 1-2 Días
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Precio:  €262.00
Descripción rápida:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Referencia:  FV-GUIDE480
  • Compatibilidad placas:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En Stock - Envío 1-2 Días
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Precio:  €10.00
Descripción rápida:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FV-SO8/20
  • Longitud:  20 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Precio:  €780.00
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP300/300
  • Rosca:  M8
En Stock - Envío 1-2 Días
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Precio:  €39.00
Descripción rápida:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Referencia:  FV-LATSML
  • Longitud:  10 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Centering Pin
Centering Pin
ID: FV-MALE
Precio:  €24.00
Descripción rápida:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Referencia:  FV-MALE
  • Rosca:  M4
En Stock - Envío 1-2 Días
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Precio:  €1,180.00
Descripción rápida:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Referencia:  FV-STARTERKIT
  • Rosca:  M4
  • Aplicación:  MMC Multisensores
En Stock - Envío 1-2 Días
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Precio:  €10.00
Descripción rápida:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FV-SO8/15
  • Longitud:  15 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Precio:  €420.00
Descripción rápida:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Referencia:  FV-SLIDE
  • Rosca:  M4
En Stock - Envío 1-2 Días
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  €33.00
Descripción rápida:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Referencia:  FX-CTSML
  • Rosca:  Sin rosca
En Stock - Envío 1-2 Días