text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  480,00 €
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Referencia:  GB0122-0019
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  560,00 €
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60
Tiempo de entrega 10-15 días
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
ID: FC-240AL3
Precio:  3.715,00 €
Descripción rápida: 

3-jaw chuck with flange made of aluminium with an outside diameter of 240 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Referencia:  FC-240AL3
  • Diámetro exterior mandril (D1):  240
  • Area de fijación exterior (A):  1 - 288
  • Area de fijación interior (I):  35 - 295
  • Material:  Aluminio
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / Ø 70 mm)
ID: FC-70SS3
Precio:  987,00 €
Descripción rápida: 

3-jaw chuck with flange made of stainless steel with an outside diameter of 70 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Referencia:  FC-70SS3
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
En Stock - Envío 1-2 Días
3-Jaw Chuck without Flange (Stainless Steel / Ø 70 mm)
ID: FC-70SS3-NF
Precio:  930,00 €
Descripción rápida: 

3-jaw chuck made of stainless steel with an outside diameter of 70 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).

  • Referencia:  FC-70SS3-NF
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
Tiempo de entrega 10-15 días
6-Jaw 125 Inside/Outside Clamping Set (AL)
ID: FC-JS-125AL6-IE
Precio:  730,00 €
Descripción rápida: 

6-jaw clamping set for internal and external clamping. Made of aluminium with a hard-coated surface and positioning holes for locating and stop pins. Compatible with Ø 125 mm aluminium 6-jaw chucks.

  • Referencia:  FC-JS-125AL6-IE
  • Material:  Aluminium, hard anodised
Tiempo de entrega 10-15 días
Clamping and Stop Pin Set for 6-Jaw Chuck Ø125 mm
ID: FC-PS-125AL6
Precio:  830,00 €
Descripción rápida: 

Clamping and stop pin set for Hexagon 6-jaw chucks Ø125 mm. Designed for the precise and repeatable positioning of a wide variety of workpieces while providing optimal accessibility during measurement.

  • Referencia:  FC-PS-125AL6
Tiempo de entrega 10-15 días
Clamping and Stop Pin Set for 6-Jaw Chuck Ø160 mm
ID: FC-PS-160AL6
Precio:  940,00 €
Descripción rápida: 

Clamping and stop pin set for 6-jaw chucks (Aluminium / D = Ø160 mm).

  • Referencia:  FC-PS-160AL6
Tiempo de entrega 10-15 días
Basic Jaw Set (Aluminium)
ID: FC-JS-240AL3-I
Precio:  1.020,00 €
Descripción rápida: 

Basic jaw set made of aluminum with hard-coated surface. Compatible with 3-jaw chucks made of aluminium with Ø 240 mm.

  • Referencia:  FC-JS-240AL3-I
  • Material:  Aluminium with hard coated surface
Tiempo de entrega 10-15 días
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Precio:  1.004,00 €
Descripción rápida: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.

  • Referencia:  FX-BP300/400
  • Rosca:  M8
En Stock - Envío 1-2 Días
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  33,00 €
Descripción rápida: 

The tension clamp enables workpieces to be clamped quickly and easily with low clamping force, without obstructing access to the measurement features.

  • Referencia:  FX-CTSML
  • Rosca:  Sin rosca
  • Compatibilidad postes de tensión:  FX-POST
  • Aplicación:  CMM, Brazo medición portátil
Tiempo de entrega 10-15 días
Vee Locator
ID: FV-FEMALE
Precio:  33,00 €
Descripción rápida:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Referencia:  FV-FEMALE
En Stock - Envío 1-2 Días
Vee Block Twin
ID: FV-VEETWIN
Precio:  47,00 €
Descripción rápida:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Referencia:  FV-VEETWIN
En Stock - Envío 1-2 Días
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Precio:  279,00 €
Descripción rápida: 

The base plate guide rail provides precise alignment and positioning of acrylic base plates at any side of the measuring volume of a multisensor CMM.

  • Referencia:  FV-GUIDE480
  • Compatibilidad placas:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En Stock - Envío 1-2 Días
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Precio:  10,00 €
Descripción rápida:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FV-SO8/20
  • Rosca:  M4
  • Diámetro:  8 mm
  • Longitud:  20 mm
En Stock - Envío 1-2 Días
Adjustable Cone (M4)
ID: FV-CONEADJ
Precio:  22,00 €
Descripción rápida:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Referencia:  FV-CONEADJ
  • Rosca:  M4
En Stock - Envío 1-2 Días
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Precio:  33,00 €
Descripción rápida: 

The tension clamp enables workpieces to be clamped quickly and easily with medium clamping force, without obstructing access to the measurement features.

  • Referencia:  FX-CTMED
  • Rosca:  Sin rosca
  • Compatibilidad postes de tensión:  FX-POST
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Precio:  819,00 €
Descripción rápida: 

This fixture base plate can be connected side-by-side with other base plates of the same size. M8 threaded holes and alphanumeric identification enable quick and easy fixture setup and repeatable fixture assembly.

  • Referencia:  FX-BP300/300
  • Rosca:  M8
En Stock - Envío 1-2 Días
Spring Nut (M8)
ID: FX-M8SPRGNUT
Precio:  33,00 €
Descripción rápida: 

Spring nuts added to a pillar provide greater flexibility when positioning vertically mounted elements.

  • Referencia:  FX-M8SPRGNUT
En Stock - Envío 1-2 Días
Pillar Kit
ID: FX-PILLAR__KIT
Precio:  1.020,00 €
Descripción rápida: 

The pillar kit enables stable horizontal mounting of Swift-Fix elements at different heights on a fixture base plate or CMM table.

  • Referencia:  FX-PILLAR/KIT
En Stock - Envío 1-2 Días