text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo
  3. CMM

CMM

Ceramic Calibration Sphere (D = 15.875 mm)
Ceramic Calibration Sphere (D = 15.875 mm)
ID: G39002200
Precio:  €462.00
Descripción rápida: 

Calibration sphere (Ø15.875 mm) made out of ceramic with M8 thread for use of CMMs.
  • Referencia:  G39002200
  • Sphere Material:  Cerámica
  • Diámetro de la esfera:  15.875mm
  • Rosca exterior:  M8
Tiempo de entrega 10-15 días
Ceramic Calibration Sphere Kit (D = 15 mm)
Ceramic Calibration Sphere Kit (D = 15 mm)
ID: G39031401
Precio:  €776.00
Descripción rápida: 

Calibration sphere set, included a certified calibration sphere (Ø15 mm) made out of ceramic and a support to position the sphere in different angles. Total height 200 mm and M8 machine fixing for use with CMMs.
  • Referencia:  G39031401
  • Sphere Material:  Cerámica
  • Diámetro de la esfera:  15mm
  • Rosca exterior:  M8
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  €480.00
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Referencia:  GB0122-0019
  • Compatibilidad:  HP-S-X3 Stylus Clampings
  • Diámetro:  40mm
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  €560.00
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Referencia:  GB0122-0008
  • Compatibilidad:  HP-S-X1 Stylus Clampings
  • Diámetro:  60mm
Tiempo de entrega 10-15 días
Ceramic Calibration Sphere (D = 15 mm)
Ceramic Calibration Sphere (D = 15 mm)
ID: C55918028
Precio:  €336.00
Descripción rápida: 

Calibration sphere (Ø15 mm) made out of ceramic with an M8 thread for use of CMMs.
  • Referencia:  C55918028
  • Sphere Material:  Cerámica
  • Diámetro de la esfera:  15mm
  • Rosca exterior:  M8
Tiempo de entrega 10-15 días
Ceramic Calibration Sphere (D = 25 mm)
Ceramic Calibration Sphere (D = 25 mm)
ID: C55918029
Precio:  €492.00
Descripción rápida: 

Calibration sphere (Ø25 mm) made out of ceramic with an M8 thread for use of CMMs.
  • Referencia:  C55918029
  • Sphere Material:  Cerámica
  • Diámetro de la esfera:  25mm
  • Rosca exterior:  M8
Entrega > 25 días
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Precio:  €420.00
Descripción rápida:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Referencia:  FV-SLIDE
  • Rosca:  M4
En Stock - Envío 1-2 Días
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Precio:  €19.00
Descripción rápida:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Referencia:  FX-CAPM8/20
  • Rosca:  M8
En Stock - Envío 1-2 Días
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Precio:  €570.00
Descripción rápida:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200C
  • Rosca:  M4
En Stock - Envío 1-2 Días
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Precio:  €22.00
Descripción rápida:  The angle block slider enables users to position elements horizontally on the base plate.
  • Referencia:  FV-ANGSLIDER
  • Rosca:  M4
En Stock - Envío 1-2 Días
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Precio:  €1,520.00
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP500/500
  • Rosca:  M8
En Stock - Envío 1-2 Días
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Precio:  €1,900.00
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP600/600
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  €19.00
Descripción rápida:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Referencia:  FV-SO/PIN
  • Longitud:  10 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  €52.00
Descripción rápida:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Referencia:  FV-CNRBRKT
En Stock - Envío 1-2 Días
Vee Block Single
Vee Block Single
ID: FV-VEE
Precio:  €32.00
Descripción rápida:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Referencia:  FV-VEE
En Stock - Envío 1-2 Días
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Precio:  €19.00
Descripción rápida:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Referencia:  FV-POST
  • Rosca:  M4
En Stock - Envío 1-2 Días
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Precio:  €475.00
Descripción rápida:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Referencia:  FX-BASIC/KIT
  • Rosca:  M8
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Precio:  €600.00
Descripción rápida:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200F
  • Rosca:  M4
En Stock - Envío 1-2 Días
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Precio:  €142.00
Descripción rápida:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Referencia:  FX-ARM
  • Rosca:  M8
En Stock - Envío 1-2 Días
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  €18.00
Descripción rápida:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Referencia:  FV-SLIDER
  • Rosca:  M4
En Stock - Envío 1-2 Días