text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catálogo

Catálogo

Flexible Vice
Flexible Vice
ID: FV-SLIDE
Precio:  CHF420.00
Descripción rápida:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Referencia:  FV-SLIDE
  • Rosca:  M4
En Stock - Envío 1-2 Días
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Precio:  CHF570.00
Descripción rápida:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200C
  • Rosca:  M4
En Stock - Envío 1-2 Días
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Precio:  CHF22.00
Descripción rápida:  The angle block slider enables users to position elements horizontally on the base plate.
  • Referencia:  FV-ANGSLIDER
  • Rosca:  M4
En Stock - Envío 1-2 Días
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Precio:  CHF1,520.00
Descripción rápida:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Referencia:  FX-BP500/500
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Precio:  CHF19.00
Descripción rápida:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Referencia:  FV-SO/PIN
  • Longitud:  10 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  CHF52.00
Descripción rápida:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Referencia:  FV-CNRBRKT
En Stock - Envío 1-2 Días
Vee Block Single
Vee Block Single
ID: FV-VEE
Precio:  CHF32.00
Descripción rápida:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Referencia:  FV-VEE
En Stock - Envío 1-2 Días
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Precio:  CHF19.00
Descripción rápida:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Referencia:  FV-POST
  • Rosca:  M4
En Stock - Envío 1-2 Días
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Precio:  CHF475.00
Descripción rápida:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Referencia:  FX-BASIC/KIT
  • Rosca:  M8
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Precio:  CHF600.00
Descripción rápida:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Referencia:  FV-BP200/200F
  • Rosca:  M4
En Stock - Envío 1-2 Días
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Precio:  CHF18.00
Descripción rápida:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Referencia:  FV-SLIDER
  • Rosca:  M4
En Stock - Envío 1-2 Días
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Precio:  CHF18.00
Descripción rápida:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Referencia:  FV-SO/MAG
  • Longitud:  10 mm
  • Diámetro:  8 mm
En Stock - Envío 1-2 Días
Spring Clamp (M4)
Spring Clamp (M4)
ID: FV-SPRING
Precio:  CHF46.00
Descripción rápida:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Referencia:  FV-SPRING
  • Rosca:  M4
En Stock - Envío 1-2 Días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  CHF15.00
Descripción rápida:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Referencia:  FV-CONE
  • Rosca:  M4
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  CHF940.00
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-70SS3
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
En Stock - Envío 1-2 Días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  CHF930.00
Descripción rápida: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-70SS3-NF
  • Diámetro exterior mandril (D1):  70
  • Area de fijación exterior (A):  1 - 71
  • Area de fijación interior (I):  18 - 66
  • Material:  Acero inoxidable
Tiempo de entrega 10-15 días
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
ID: FC-240AL3-NF
Precio:  CHF3,300.00
Descripción rápida:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Referencia:  FC-240AL3-NF
  • Diámetro exterior mandril (D1):  240
  • Area de fijación exterior (A):  1 - 288
  • Area de fijación interior (I):  35 - 295
  • Material:  Aluminio
Tiempo de entrega 10-15 días
3-Jaw 125 Inside Clamping Set (Stainless Steel)
3-Jaw 125 Inside Clamping Set (Stainless Steel)
ID: FC-JS-125SS3-I
Precio:  CHF418.00
Descripción rápida: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Referencia:  FC-JS-125SS3-I
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
3-Jaw 160 Inside Clamping Set (Stainless Steel)
3-Jaw 160 Inside Clamping Set (Stainless Steel)
ID: FC-JS-160SS3-I
Precio:  CHF474.00
Descripción rápida: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø160 mm.
  • Referencia:  FC-JS-160SS3-I
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días
3-Jaw 70 Outside Clamping Set (Stainless Steel)
3-Jaw 70 Outside Clamping Set (Stainless Steel)
ID: FC-JS-70SS3-E
Precio:  CHF364.00
Descripción rápida: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø70 mm.
  • Referencia:  FC-JS-70SS3-E
  • Material:  Stainless Steel, vacuum-hardened, ground
Tiempo de entrega 10-15 días