text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
Hollow Taper Shank HSK50 Form E for Air Jet
ID: D20-HSK50E-AJ-B
Precio:  930,00 CHF
Descripción rápida: 

Hollow taper shank HSK50 Form E for use with Hexagon touch probes with air jet, D20 connection and bidirectional activation in the machine tool.

  • Referencia:  D20-HSK50E-AJ-B
  • Interface:  D20
  • Forma:  E
Tiempo de entrega 10-15 días
Hollow Taper Shank HSK40 Form E
ID: D20-HSK40E-B
Precio:  257,00 CHF
Descripción rápida: 

Hollow taper shank HSK40 Form E for use with Hexagon touch probes with D20 connection and bidirectional activation in the machine tool.

  • Referencia:  D20-HSK40E-B
  • Interface:  D20
  • Forma:  E
En Stock - Envío 1-2 Días
Vee Block Twin
ID: FV-VEETWIN
Precio:  47,00 CHF
Descripción rápida:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Referencia:  FV-VEETWIN
En Stock - Envío 1-2 Días
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Precio:  279,00 CHF
Descripción rápida: 

The base plate guide rail provides precise alignment and positioning of acrylic base plates at any side of the measuring volume of a multisensor CMM.

  • Referencia:  FV-GUIDE480
  • Compatibilidad placas:  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En Stock - Envío 1-2 Días
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Precio:  33,00 CHF
Descripción rápida: 

The tension clamp enables workpieces to be clamped quickly and easily with low clamping force, without obstructing access to the measurement features.

  • Referencia:  FX-CTSML
  • Rosca:  Sin rosca
  • Compatibilidad postes de tensión:  FX-POST
  • Aplicación:  CMM, Brazo medición portátil
Tiempo de entrega 10-15 días
Spring Clamp
ID: FX-SPRING
Precio:  50,00 CHF
Descripción rápida: 

Spring clamps securely hold parts with minimal force while maintaining unobstructed measurement access.

  • Referencia:  FX-SPRING
  • Rosca:  Sin rosca
  • Compatibilidad postes de tensión:  FX-POST
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días
Thumb Screw M8
ID: FX-THUMB
Precio:  11,00 CHF
Descripción rápida:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Referencia:  FX-THUMB
  • Rosca:  M8
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Precio:  18,00 CHF
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/20
  • Rosca:  M8
  • Diámetro:  16 mm
  • Longitud:  20 mm
En Stock - Envío 1-2 Días
Hinge Pivot with Handle
ID: FX-PR30HINGE
Precio:  84,00 CHF
Descripción rápida: 

The hinge pivot connects two pillars at adjustable angles, providing greater flexibility when mounting large fixtures.

  • Referencia:  FX-PR30HINGE
En Stock - Envío 1-2 Días
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Precio:  33,00 CHF
Descripción rápida: 

The tension clamp enables workpieces to be clamped quickly and easily with medium clamping force, without obstructing access to the measurement features.

  • Referencia:  FX-CTMED
  • Rosca:  Sin rosca
  • Compatibilidad postes de tensión:  FX-POST
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Precio:  26,00 CHF
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO16/100
  • Rosca:  M8
  • Diámetro:  16 mm
  • Longitud:  100 mm
En Stock - Envío 1-2 Días
Spring Nut (M8)
ID: FX-M8SPRGNUT
Precio:  33,00 CHF
Descripción rápida: 

Spring nuts added to a pillar provide greater flexibility when positioning vertically mounted elements.

  • Referencia:  FX-M8SPRGNUT
En Stock - Envío 1-2 Días
Pillar Top Plate  (10 x M8)
ID: FX-SUB45__120
Precio:  60,00 CHF
Descripción rápida: 

The pillar top plate allows additional Swift-Fix components to be mounted on top of a Swift-Fix pillar.

  • Referencia:  FX-SUB45/120
  • Tamaño:  120 x 45 x 12 mm
En Stock - Envío 1-2 Días
Swift-Fix - Starter Kit
ID: FX-STARTER__KIT
Precio:  1.296,00 CHF
Descripción rápida: 

The Swift-Fix Starter Kit contains a base plate and a set of basic components for fixture assembly. The components are supplied in a sturdy box, keeping them well organized and readily accessible.

  • Referencia:  FX-STARTER/KIT
  • Rosca:  M8
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días
Support Stop (M8)
ID: FX-SUP__STOP
Precio:  87,00 CHF
Descripción rápida: 

The support stop is used to secure workpieces with adjustable clamping force. By reversing the support stop, it can also be used as a compact V-block.

  • Referencia:  FX-SUP/STOP
  • Rosca:  M8
En Stock - Envío 1-2 Días
Spring Pusher Standoff Clamp (D = 16 mm / L = 20 mm)
ID: FX-LATMED
Precio:  58,00 CHF
Descripción rápida: 

The spring-loaded standoff securely holds delicate components in position using lateral clamping force.

  • Referencia:  FX-LATMED
  • Rosca:  M8
  • Diámetro:  16 mm
  • Longitud:  20 mm
En Stock - Envío 1-2 Días
Swift-Fix - Bronze Kit
ID: FX-BRONZE__KIT
Precio:  1.061,00 CHF
Descripción rápida: 

The Swift-Fix Bronze Kit contains 46 components for the construction of basic fixtures. The components are supplied in a sturdy case, keeping them well organized and readily accessible.

  • Referencia:  FX-BRONZE/KIT
  • Rosca:  M8
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días
Pillar 30x30x150mm
ID: FX-PR30__150
Precio:  43,00 CHF
Descripción rápida:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Referencia:  FX-PR30/150
  • Tamaño:  30 x 30 x 150 mm
En Stock - Envío 1-2 Días
Tension Post (M8)
ID: FX-POST
Precio:  27,00 CHF
Descripción rápida: 

A tension post is designed for use with tension and spring clamps and can be mounted on other Swift-Fix M8 components.

  • Referencia:  FX-POST
  • Rosca:  M8
  • Aplicación:  CMM, Brazo medición portátil
En Stock - Envío 1-2 Días
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
Precio:  19,00 CHF
Descripción rápida:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Referencia:  FX-SO20/20
  • Rosca:  M8
  • Diámetro:  20 mm
  • Longitud:  20 mm
En Stock - Envío 1-2 Días