Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Price:  £436.00
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Part Number:  GB0122-0019
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Delivery time 10-15 days
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Price:  £509.00
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Part Number:  GB0122-0008
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Delivery time 10-15 days
Support Stop
Support Stop
ID: FX-SUP__STOP
Price:  £79.00
Quick Overview:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Part Number:  FX-SUP/STOP
  • Thread:  M8
In Stock - Despatched 1-2 Days
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Price:  £913.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP300/400
  • Thread:  M8
In Stock - Despatched 1-2 Days
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Price:  £30.00
Quick Overview:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Part Number:  FX-CTSML
  • Thread:  Without Thread
In Stock - Despatched 1-2 Days
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Price:  £17.00
Quick Overview:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Part Number:  FX-CAPM8/16
  • Thread:  M8
In Stock - Despatched 1-2 Days
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Price:  £20.00
Quick Overview:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Part Number:  FX-SO/MAG
  • Length:  20 mm
  • Diameter:  16 mm
In Stock - Despatched 1-2 Days
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Price:  £20.00
Quick Overview:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Part Number:  FX-CONE
  • Thread:  M8
In Stock - Despatched 1-2 Days
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Price:  £45.00
Quick Overview:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Part Number:  FX-PR30PLATE
  • Size:  130 x 30 mm
In Stock - Despatched 1-2 Days
Fixture Baseplate 500x500x12mm (M8)
Fixture Baseplate 500x500x12mm (M8)
ID: FX-BP500__500
Price:  £1,493.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP500/500
  • Thread:  M8
In Stock - Despatched 1-2 Days
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Price:  £36.00
Quick Overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/100
  • Size:  30 x 30 x 100 mm
In Stock - Despatched 1-2 Days
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Price:  £45.00
Quick Overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Part Number:  FX-PR30/250
  • Size:  30 x 30 x 250 mm
In Stock - Despatched 1-2 Days
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Price:  £35.00
Quick Overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/50
  • Size:  30 x 30 x 50 mm
In Stock - Despatched 1-2 Days
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Price:  £5,233.00
Quick Overview:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Part Number:  GB0096-2001
  • CMM Compatibility:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software Compatibility:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Dimensions:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Sphere Diameter = 25 mm
Delivery > 25 days
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Price:  £7,773.00
Quick Overview: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Part Number:  GB0122-1000
  • Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Delivery > 25 days
Kinematic Base for Fixture Plate 400x400mm
Kinematic Base for Fixture Plate 400x400mm
ID: KB-300__300
Price:  £698.00
Quick Overview:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Part Number:  KB-300/300
  • Plate Compatibility :  KPP-400/400, KPT-400/400
In Stock - Despatched 1-2 Days
Kinematic Fixture Plate 400x400mm (Plain)
Kinematic Fixture Plate 400x400mm (Plain)
ID: KPP-400__400
Price:  £591.00
Quick Overview:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Part Number:  KPP-400/400
  • Plate Compatibility :  KB-300/300, KB-UNIVL
In Stock - Despatched 1-2 Days
Kinematic Fixture Plate 500x500x16 mm (M8)
Kinematic Fixture Plate 500x500x16 mm (M8)
ID: KPT-500__500
Price:  £1,865.00
Quick Overview:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Part Number:  KPT-500/500
  • Plate Compatibility :  KB-400/400, KB-UNIVL
In Stock - Despatched 1-2 Days
Vee Locator
Vee Locator
ID: FV-FEMALE
Price:  £30.00
Quick Overview:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Part Number:  FV-FEMALE
In Stock - Despatched 1-2 Days
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Price:  £254.00
Quick Overview:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Part Number:  FV-GUIDE480
  • Plate Compatibility :  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
In Stock - Despatched 1-2 Days