text.skipToContent text.skipToNavigation
Az új biztonsági fejlesztések részeként kérjük, hogy módosítsa a jelszavát
  1. Kezdőlap
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
Azonosító: FC-125SS3
Ár:  zł5,246.00
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125SS3
  • Outside Diameter Chuck (D1):  125
  • Clamping Range Outside (A):  1 - 126
  • Clamping Range Inside (I):  32 - 122
  • Fixing:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
Azonosító: FC-160SS3
Ár:  zł6,730.00
Gyors áttekintés:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160SS3
  • Outside Diameter Chuck (D1):  160
  • Clamping Range Outside (A):  1 - 150
  • Clamping Range Inside (I):  34 - 174
  • Fixing:  M4 / M8
Raktáron - Kiszállítás 1-2 napon belül
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
Azonosító: FC-125AL6-NF
Ár:  zł4,902.00
Gyors áttekintés:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6-NF
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing (G):  M5
A szállítási idő 10-15 nap
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
Azonosító: FC-160AL6-NF
Ár:  zł6,407.00
Gyors áttekintés:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160AL6-NF
  • Outside Diameter Chuck (D1):  160
  • Clamping Range:  5 - 196
  • Fixing (G):  M6
A szállítási idő 10-15 nap
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
Azonosító: FC-125SS3-NF
Ár:  zł4,902.00
Gyors áttekintés: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125SS3-NF
  • Outside Diameter Chuck (D1):  125
  • Clamping Range Outside (A):  1 - 126
  • Clamping Range Inside (I):  32 - 122
  • Fixing (G):  M5
A szállítási idő 10-15 nap
SWIFT-CHECK
SWIFT-CHECK
Azonosító: GB0096-2001
Ár:  zł24,751.00
Gyors áttekintés:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Part Number:  GB0096-2001
  • CMM Compatibility:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software Compatibility:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Dimensions:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Sphere Diameter = 25 mm
Szállítási > 25 nap
SWIFT-SET
SWIFT-SET
Azonosító: GB0122-1000
Ár:  zł36,765.00
Gyors áttekintés: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Part Number:  GB0122-1000
  • Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Szállítási > 25 nap
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
Azonosító: FX-CTSML
Ár:  zł142.00
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Part Number:  FX-CTSML
  • Thread:  Without Thread
Raktáron - Kiszállítás 1-2 napon belül
Spring Clamp (M8)
Spring Clamp (M8)
Azonosító: FX-SPRING
Ár:  50,00 €
Gyors áttekintés:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Part Number:  FX-SPRING
  • Thread:  Without Thread
Raktáron - Kiszállítás 1-2 napon belül
Thumb Screw M8
Thumb Screw M8
Azonosító: FX-THUMB
Ár:  11,00 €
Gyors áttekintés:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Part Number:  FX-THUMB
  • Thread:  M8
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
Azonosító: FX-SO16__20
Ár:  18,00 €
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/20
  • Length:  20 mm
  • Diameter:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Hinge Pivot With Handle
Hinge Pivot With Handle
Azonosító: FX-PR30HINGE
Ár:  84,00 €
Gyors áttekintés:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Part Number:  FX-PR30HINGE
Raktáron - Kiszállítás 1-2 napon belül
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
Azonosító: FX-CTMED
Ár:  33,00 €
Gyors áttekintés:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Part Number:  FX-CTMED
  • Thread:  Without Thread
Raktáron - Kiszállítás 1-2 napon belül
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
Azonosító: FX-SO16__100
Ár:  26,00 €
Gyors áttekintés:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/100
  • Length:  100 mm
  • Diameter:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Spring Nut (M8)
Spring Nut (M8)
Azonosító: FX-M8SPRGNUT
Ár:  33,00 €
Gyors áttekintés:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Part Number:  FX-M8SPRGNUT
Raktáron - Kiszállítás 1-2 napon belül
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
Azonosító: FX-SUB45__120
Ár:  60,00 €
Gyors áttekintés:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Part Number:  FX-SUB45/120
  • Size:  120 x 45 x 12 mm
Raktáron - Kiszállítás 1-2 napon belül
Support Stop
Support Stop
Azonosító: FX-SUP__STOP
Ár:  87,00 €
Gyors áttekintés:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Part Number:  FX-SUP/STOP
  • Thread:  M8
Raktáron - Kiszállítás 1-2 napon belül
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Azonosító: FX-LATMED
Ár:  58,00 €
Gyors áttekintés:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Part Number:  FX-LATMED
  • Length:  20 mm
  • Diameter:  16 mm
Raktáron - Kiszállítás 1-2 napon belül
Swift-Fix - Bronze Kit
Swift-Fix - Bronze Kit
Azonosító: FX-BRONZE__KIT
Ár:  1 061,00 €
Gyors áttekintés:  The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Part Number:  FX-BRONZE/KIT
  • Thread:  M8
  • Application:  CMM, Portable Measuring Arm
Raktáron - Kiszállítás 1-2 napon belül
Pillar 30x30x150mm
Pillar 30x30x150mm
Azonosító: FX-PR30__150
Ár:  43,00 €
Gyors áttekintés:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/150
  • Size:  30 x 30 x 150 mm
Raktáron - Kiszállítás 1-2 napon belül