text.skipToContent text.skipToNavigation
Como parte de nuestras nuevas actualizaciones de seguridad, se le solicita que restablezca su contraseña
  1. Inicio
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Precio:  CHF480.00
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Part Number:  GB0122-0019
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Tiempo de entrega 10-15 días
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Precio:  CHF560.00
Descripción rápida:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Part Number:  GB0122-0008
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Tiempo de entrega 10-15 días
Vee Locator
Vee Locator
ID: FV-FEMALE
Precio:  CHF33.00
Descripción rápida:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Part Number:  FV-FEMALE
En Stock - Envío 1-2 Días
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Precio:  CHF279.00
Descripción rápida:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Part Number:  FV-GUIDE480
  • Plate Compatibility :  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
En Stock - Envío 1-2 Días
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Precio:  CHF22.00
Descripción rápida:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Part Number:  FV-CONEADJ
  • Thread:  M4
En Stock - Envío 1-2 Días
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Precio:  CHF594.00
Descripción rápida:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Part Number:  FV-BP200/200P
  • Thread:  M4
En Stock - Envío 1-2 Días
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Precio:  CHF2,530.00
Descripción rápida:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Part Number:  FV-FULLKIT
  • Thread:  M4
  • Application:  Multisensor CMM
En Stock - Envío 1-2 Días
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Precio:  CHF605.00
Descripción rápida:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Part Number:  FV-BP200/200C
  • Thread:  M4
En Stock - Envío 1-2 Días
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Precio:  CHF22.00
Descripción rápida:  The angle block slider enables users to position elements horizontally on the base plate.
  • Part Number:  FV-ANGSLIDER
  • Thread:  M4
En Stock - Envío 1-2 Días
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Precio:  CHF52.00
Descripción rápida:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Part Number:  FV-CNRBRKT
En Stock - Envío 1-2 Días
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Precio:  CHF15.00
Descripción rápida:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Part Number:  FV-CONE
  • Thread:  M4
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Precio:  CHF1,220.00
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125SS3
  • Outside Diameter Chuck (D1):  125
  • Clamping Range Outside (A):  1 - 126
  • Clamping Range Inside (I):  32 - 122
  • Fixing:  M4 / M8
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Precio:  CHF1,565.00
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160SS3
  • Outside Diameter Chuck (D1):  160
  • Clamping Range Outside (A):  1 - 150
  • Clamping Range Inside (I):  34 - 174
  • Fixing:  M4 / M8
En Stock - Envío 1-2 Días
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Precio:  CHF987.00
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-70SS3
  • Outside Diameter Chuck (D1):  70
  • Clamping Range Outside (A):  1 - 71
  • Clamping Range Inside (I):  18 - 66
  • Fixing:  M4 / M8
En Stock - Envío 1-2 Días
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Precio:  CHF930.00
Descripción rápida: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-70SS3-NF
  • Outside Diameter Chuck (D1):  70
  • Clamping Range Outside (A):  1 - 71
  • Clamping Range Inside (I):  18 - 66
  • Fixing (G):  M3
Tiempo de entrega 10-15 días
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Precio:  CHF1,420.00
Descripción rápida:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160SS3-NF
  • Outside Diameter Chuck (D1):  160
  • Clamping Range Outside (A):  1 - 150
  • Clamping Range Inside (I):  34 - 174
  • Fixing (G):  M6
Tiempo de entrega 10-15 días
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Precio:  CHF1,140.00
Descripción rápida:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6-NF
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing (G):  M5
Tiempo de entrega 10-15 días
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Precio:  CHF1,490.00
Descripción rápida:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160AL6-NF
  • Outside Diameter Chuck (D1):  160
  • Clamping Range:  5 - 196
  • Fixing (G):  M6
Tiempo de entrega 10-15 días
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
ID: FC-240AL3-NF
Precio:  CHF3,300.00
Descripción rápida:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-240AL3-NF
  • Outside Diameter Chuck (D1):  240
  • Clamping Range Outside (A):  1 - 288
  • Clamping Range Inside (I):  35 - 295
  • Fixing (G):  M8
Tiempo de entrega 10-15 días
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
ID: FC-125SS3-NF
Precio:  CHF1,140.00
Descripción rápida: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125SS3-NF
  • Outside Diameter Chuck (D1):  125
  • Clamping Range Outside (A):  1 - 126
  • Clamping Range Inside (I):  32 - 122
  • Fixing (G):  M5
Tiempo de entrega 10-15 días