Skip to content Skip to navigation menu

As part of our new security upgrades, you are requested to reset your password

CMM

178 Product(s) found

Spring Plunger

ID: FX-PLUNGER

Price: €91.00

Quick Overview: The spring plunger exerts low forces to hold sensible parts in position.

Thread: M8

In Stock - Despatched 1-2 Days

Spring Pusher Standoff Clamp (D=20mm / L=20mm)

ID: FX-LATLGE

Price: €60.00

Quick Overview: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Length: 20 mm
Diameter: 20 mm

In Stock - Despatched 1-2 Days

Kinematic Support Kit Plus

ID: FX-KINKITPLUS

Price: €263.00

Quick Overview: The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.

Plate Compatibility : KB-UNIVL

In Stock - Despatched 1-2 Days

Toggle Clamp

ID: FX-TOG

Price: €107.00

Quick Overview: Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.

Thread: M8

In Stock - Despatched 1-2 Days

SWIFT-CHECK

ID: GB0096-2001

Price: €5,270.00

Quick Overview: SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.

CMM Compatibility: GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
Software Compatibility: PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
Run Time: Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
Dimensions: Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Sphere Diameter = 25 mm

Delivery time 10-15 days

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Price: €884.00

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Thread: M8

In Stock - Despatched 1-2 Days

Centering Pin

ID: FV-MALE

Price: €20.00

Quick Overview: Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.

Thread: M4

In Stock - Despatched 1-2 Days

Baseplate Retaining Screw (M8)

ID: FX-BPRTR

Price: €5.00

Quick Overview: Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.

Thread: M8

In Stock - Despatched 1-2 Days

6-Jaw Chuck with Flange (Aluminium / D = 125 mm)

ID: FC-125AL6

Price: €1,160.00

Quick Overview: Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 125mm
Clamping Range: 5 - 156mm
Fixing: M4 / M8

In Stock - Despatched 1-2 Days

6-Jaw Chuck with Flange (Aluminium / D = 160 mm)

ID: FC-160AL6

Price: €1,430.00

Quick Overview: Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 160mm
Clamping Range: 5 - 196mm
Fixing: M4 / M8

In Stock - Despatched 1-2 Days

3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)

ID: FC-160SS3

Price: €1,430.00

Quick Overview: Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 160mm
Clamping Range Outside (A): 1 - 150mm
Clamping Range Inside (I): 34 - 174mm
Fixing: M4 / M8

In Stock - Despatched 1-2 Days

3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)

ID: FC-70SS3-NF

Price: €890.00

Quick Overview:

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 70mm
Clamping Range Outside (A): 1 - 71mm
Clamping Range Inside (I): 18 - 66mm
Fixing (G): M3

Delivery time 10-15 days

HR-SB Standard Base for HR-MP Rack

ID: 03939493

Price: €228.00

Quick Overview: Standard base with standard cylinder, standard fixation piece and mounting equipment

Delivery > 25 days

HR-AB Accurate Base for HR-MP Rack

ID: 03939494

Price: €750.00

Quick Overview: Accurate base with accurate cylinder, accurate fixation piece and mounting equipment

Delivery > 25 days

HP-TMe Probe Kit 9 (1x Standard Force)

ID: 03939315

Price: €2,630.00

Quick Overview: The HP-TMe Probe is a compact 5-way touch trigger probe in two-piece design. The HP-TMe Probe Kit 9 includes 1 probe body and 1 standard force probe module.

Related Probe: HP-TMe
Probing Directions: ± X, ± Y, + Z
Probe Mounting: M8
Stylus Mounting: M2
Kit Content: 1x HP-TBe Probe Body, 1x HP-TMe-SF Probe Module

Delivery > 25 days

HP-TMe Probe Kit 10 (1x Medium Force)

ID: 03939316

Price: €2,630.00

Quick Overview: The HP-TMe Probe is a compact 5-way touch trigger probe in two-piece design. The HP-TMe Probe Kit 10 includes 1 probe body and 1 medium force probe module.

Related Probe: HP-TMe
Probing Directions: ± X, ± Y, + Z
Probe Mounting: M8
Stylus Mounting: M2
Kit Content: 1x HP-TBe Probe Body, 1x HP-TMe-MF Probe Module

Delivery > 25 days

HP-TMe Probe Kit 5 (2x Medium Force)

ID: 03939311

Price: €2,950.00

Quick Overview: The HP-TMe Probe is a compact 5-way touch trigger probe in two-piece design. The HP-TMe Probe Kit 5 includes 1 probe body and 2 medium force probe modules.