text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
  1. Pagina iniziale
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Prezzo:  CHF50.00
Descrizione:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Part Number:  FX-SPRING
  • Thread:  Without Thread
Disponibile - Spedizione in 1-2 Giorni
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prezzo:  CHF11.00
Descrizione:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Part Number:  FX-THUMB
  • Thread:  M8
Disponibile - Spedizione in 1-2 Giorni
Pillar Top Plate (10 x M8)
Pillar Top Plate (10 x M8)
ID: FX-SUB45__120
Prezzo:  CHF60.00
Descrizione:  The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
  • Part Number:  FX-SUB45/120
  • Size:  120 x 45 x 12 mm
Disponibile - Spedizione in 1-2 Giorni
Support Stop
Support Stop
ID: FX-SUP__STOP
Prezzo:  CHF87.00
Descrizione:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Part Number:  FX-SUP/STOP
  • Thread:  M8
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Prezzo:  CHF27.00
Descrizione:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Part Number:  FX-TOOLS
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Prezzo:  CHF18.00
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO20/30
  • Length:  30 mm
  • Diameter:  20 mm
Disponibile - Spedizione in 1-2 Giorni
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Prezzo:  CHF95.00
Descrizione:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Part Number:  FX-UNI/JOINT
  • Thread:  M8
Disponibile - Spedizione in 1-2 Giorni
Vee Locator
Vee Locator
ID: FX-VEE
Prezzo:  CHF77.00
Descrizione:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Part Number:  FX-VEE
  • Thread:  M8
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 20 mm / L = 50 mm)
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Prezzo:  CHF19.00
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO20/50
  • Length:  50 mm
  • Diameter:  20 mm
Disponibile - Spedizione in 1-2 Giorni
Toggle Clamp
Toggle Clamp
ID: FX-TOG
Prezzo:  CHF139.00
Descrizione:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Part Number:  FX-TOG
  • Thread:  M8
Disponibile - Spedizione in 1-2 Giorni
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Prezzo:  CHF5,756.00
Descrizione:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Part Number:  GB0096-2001
  • CMM Compatibility:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software Compatibility:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Dimensions:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Sphere Diameter = 25 mm
Consegna > 25 giorni
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Prezzo:  CHF8,550.00
Descrizione: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Part Number:  GB0122-1000
  • Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Consegna > 25 giorni
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Prezzo:  CHF1,004.00
Descrizione:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP300/400
  • Thread:  M8
Disponibile - Spedizione in 1-2 Giorni
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Prezzo:  CHF33.00
Descrizione:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Part Number:  FX-CTSML
  • Thread:  Without Thread
Disponibile - Spedizione in 1-2 Giorni
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prezzo:  CHF47.00
Descrizione:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Part Number:  FV-VEETWIN
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prezzo:  CHF18.00
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/20
  • Length:  20 mm
  • Diameter:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prezzo:  CHF84.00
Descrizione:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Part Number:  FX-PR30HINGE
Disponibile - Spedizione in 1-2 Giorni
Tension Clamp (L = 66 mm)
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prezzo:  CHF33.00
Descrizione:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Part Number:  FX-CTMED
  • Thread:  Without Thread
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 16 mm / L = 100 mm)
Standoff (D = 16 mm / L = 100 mm)
ID: FX-SO16__100
Prezzo:  26,00 CHF
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/100
  • Length:  100 mm
  • Diameter:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prezzo:  33,00 CHF
Descrizione:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Part Number:  FX-M8SPRGNUT
Disponibile - Spedizione in 1-2 Giorni