Zum Inhalt springen Zum Navigationsmenü springen
Im Rahmen unserer neuen Sicherheitsmaßnahmen bitten wir Sie, Ihr Passwort zurückzusetzen
  1. Startseite
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Preis:  zł2,064.00
Schnellübersicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Part Number:  GB0122-0019
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
Lieferzeit 10-15 Tage
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Preis:  zł2,408.00
Schnellübersicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Part Number:  GB0122-0008
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
Lieferzeit 10-15 Tage
Vee Locator
Vee Locator
ID: FV-FEMALE
Preis:  zł142.00
Schnellübersicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Part Number:  FV-FEMALE
Auf Lager - Versand 1-2 Tage
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Preis:  zł1,127.00
Schnellübersicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Part Number:  FV-GUIDE480
  • Plate Compatibility :  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Auf Lager - Versand 1-2 Tage
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Preis:  zł95.00
Schnellübersicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Part Number:  FV-CONEADJ
  • Thread:  M4
Auf Lager - Versand 1-2 Tage
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Preis:  zł168.00
Schnellübersicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Part Number:  FV-LATSML
  • Length:  10 mm
  • Diameter:  8 mm
Auf Lager - Versand 1-2 Tage
Centering Pin
Centering Pin
ID: FV-MALE
Preis:  zł103.00
Schnellübersicht:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Part Number:  FV-MALE
  • Thread:  M4
Auf Lager - Versand 1-2 Tage
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Preis:  zł95.00
Schnellübersicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Part Number:  FV-ANGSLIDER
  • Thread:  M4
Auf Lager - Versand 1-2 Tage
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Preis:  zł224.00
Schnellübersicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Part Number:  FV-CNRBRKT
Auf Lager - Versand 1-2 Tage
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Preis:  zł2,580.00
Schnellübersicht:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Part Number:  FV-BP200/200F
  • Thread:  M4
Auf Lager - Versand 1-2 Tage
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Preis:  zł65.00
Schnellübersicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Part Number:  FV-CONE
  • Thread:  M4
Auf Lager - Versand 1-2 Tage
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Preis:  zł5,246.00
Schnellübersicht:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125SS3
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range Outside (A):  1 - 126mm
  • Clamping Range Inside (I):  32 - 122mm
  • Fixing:  M4 / M8
Auf Lager - Versand 1-2 Tage
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Preis:  zł5,246.00
Schnellübersicht:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range:  5 - 156mm
  • Fixing:  M4 / M8
Auf Lager - Versand 1-2 Tage
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Preis:  zł6,407.00
Schnellübersicht:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160AL6
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range:  5 - 196mm
  • Fixing:  M4 / M8
Auf Lager - Versand 1-2 Tage
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Preis:  zł6,407.00
Schnellübersicht:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160SS3
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range Outside (A):  1 - 150mm
  • Clamping Range Inside (I):  34 - 174mm
  • Fixing:  M4 / M8
Auf Lager - Versand 1-2 Tage
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Preis:  zł4,042.00
Schnellübersicht:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-70SS3
  • Outside Diameter Chuck (D1):  70mm
  • Clamping Range Outside (A):  1 - 71mm
  • Clamping Range Inside (I):  18 - 66mm
  • Fixing:  M4 / M8
Auf Lager - Versand 1-2 Tage
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Preis:  zł3,999.00
Schnellübersicht: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-70SS3-NF
  • Outside Diameter Chuck (D1):  70mm
  • Clamping Range Outside (A):  1 - 71mm
  • Clamping Range Inside (I):  18 - 66mm
  • Fixing (G):  M3
Lieferzeit 10-15 Tage
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Preis:  zł6,106.00
Schnellübersicht:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160SS3-NF
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range Outside (A):  1 - 150mm
  • Clamping Range Inside (I):  34 - 174mm
  • Fixing (G):  M6
Lieferzeit 10-15 Tage
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Preis:  zł4,902.00
Schnellübersicht:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6-NF
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range:  5 - 156mm
  • Fixing (G):  M5
Lieferzeit 10-15 Tage
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
ID: FC-160AL6-NF
Preis:  zł6,407.00
Schnellübersicht:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160AL6-NF
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range:  5 - 196mm
  • Fixing (G):  M6
Lieferzeit 10-15 Tage