text.skipToContent text.skipToNavigation
V rámci nových bezpečnostních vylepšení vás žádáme o obnovení hesla
  1. Domů
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

Vee Locator
Vee Locator
ID: FV-FEMALE
Cena:  £30.00
Rychlý přehled:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Part Number:  FV-FEMALE
Skladem - Odeslání do 1-2 dnů
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Cena:  £254.00
Rychlý přehled: 

The base plate guide rail provides precise alignment and positioning of acrylic base plates at any side of the measuring volume of a multisensor CMM.
  • Part Number:  FV-GUIDE480
  • Plate Compatibility :  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Skladem - Odeslání do 1-2 dnů
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  £9.00
Rychlý přehled:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FV-SO8/20
  • Thread:  M4
  • Diameter:  8 mm
  • Length:  20 mm
Skladem - Odeslání do 1-2 dnů
Adjustable Cone (M4)
Adjustable Cone (M4)
ID: FV-CONEADJ
Cena:  £20.00
Rychlý přehled:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Part Number:  FV-CONEADJ
  • Thread:  M4
Skladem - Odeslání do 1-2 dnů
Spring Pusher Standoff Clamp (D = 8 mm / L = 10 mm)
Spring Pusher Standoff Clamp (D = 8 mm / L = 10 mm)
ID: FV-LATSML
Cena:  £35.00
Rychlý přehled: 

The spring-loaded standoff securely holds delicate components in position using lateral clamping force.
  • Part Number:  FV-LATSML
  • Thread:  M4
  • Diameter:  8 mm
  • Length:  10 mm
Skladem - Odeslání do 1-2 dnů
Acryl Baseplate 200x200x10mm(M4) - Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4) - Perimeter Pattern
ID: FV-BP200__200P
Cena:  £540.00
Rychlý přehled:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Part Number:  FV-BP200/200P
  • Thread:  M4
Skladem - Odeslání do 1-2 dnů
Centering Pin
Centering Pin
ID: FV-MALE
Cena:  £22.00
Rychlý přehled:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Part Number:  FV-MALE
  • Thread:  M4
Skladem - Odeslání do 1-2 dnů
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Cena:  £9.00
Rychlý přehled:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FV-SO8/15
  • Thread:  M4
  • Diameter:  8 mm
  • Length:  15 mm
Skladem - Odeslání do 1-2 dnů
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Cena:  £2,300.00
Rychlý přehled:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Part Number:  FV-FULLKIT
  • Thread:  M4
  • Application:  Multisensor CMM
Skladem - Odeslání do 1-2 dnů
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Cena:  £382.00
Rychlý přehled:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Part Number:  FV-SLIDE
  • Thread:  M4
Skladem - Odeslání do 1-2 dnů
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Cena:  £550.00
Rychlý přehled:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Part Number:  FV-BP200/200C
  • Thread:  M4
Skladem - Odeslání do 1-2 dnů
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Cena:  £20.00
Rychlý přehled:  The angle block slider enables users to position elements horizontally on the base plate.
  • Part Number:  FV-ANGSLIDER
  • Thread:  M4
Skladem - Odeslání do 1-2 dnů
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Cena:  £17.00
Rychlý přehled: 

Standoffs with pins enable precise positioning and secure support of workpieces without restricting access to relevant measurement areas.
  • Part Number:  FV-SO/PIN
  • Thread:  M4
  • Diameter:  8 mm
  • Length:  10 mm
Skladem - Odeslání do 1-2 dnů
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Cena:  £47.00
Rychlý přehled:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Part Number:  FV-CNRBRKT
Skladem - Odeslání do 1-2 dnů
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Cena:  £17.00
Rychlý přehled:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Part Number:  FV-POST
  • Thread:  M4
Skladem - Odeslání do 1-2 dnů
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Cena:  £580.00
Rychlý přehled:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Part Number:  FV-BP200/200F
  • Thread:  M4
Skladem - Odeslání do 1-2 dnů
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Cena:  £16.00
Rychlý přehled:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Part Number:  FV-SLIDER
  • Thread:  M4
Skladem - Odeslání do 1-2 dnů
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Cena:  £16.00
Rychlý přehled:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Part Number:  FV-SO/MAG
  • Thread:  M4
  • Diameter:  8 mm
  • Length:  10 mm
Skladem - Odeslání do 1-2 dnů
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Cena:  £14.00
Rychlý přehled:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Part Number:  FV-CONE
  • Thread:  M4
Skladem - Odeslání do 1-2 dnů
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6
Cena:  £1,198.00
Rychlý přehled: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-125AL6
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing:  M4 / M8
Skladem - Odeslání do 1-2 dnů