As part of our new security upgrades, you are requested to reset your password

CMM

166 Product(s) found

ID: GB0096-2001

Price: €5,270.00

Quick Overview: SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.

CMM Compatibility: GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
Software Compatibility: PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
Run Time: Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
Dimensions: Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Sphere Diameter = 25 mm

Delivery time 10-15 days

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Price: €466.00

Quick Overview: Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.

Compatibility: HP-S-X3 Stylus Clampings
Diameter: 40mm

Delivery time 10-15 days

SWIFT-SET Adapter for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Price: €540.00

Compatibility: HP-S-X1 Stylus Clampings
Diameter: 60mm

Delivery time 10-15 days

SWIFT-SET

ID: GB0122-1000

Price: €8,140.00

Quick Overview: Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon’s HP-S-X tactile scanning sensors.

Compatibility: HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
Axial Rotation: 0° - 360°
Angular Rotation: 0°- 90°

Delivery time 10-15 days

HA-TT-100 Probe Extension TKJ (L = 100 mm)

ID: 03969361

Price: €910.00

Quick Overview: TKJ extension made of aluminium and stainless steel with a length of 100 mm.

Connection: TKJ / TKJ
Length (L): 100mm
Material: Aluminium / Stainless Steel

In Stock - Despatched 1-2 Days

HA-TT-300 Probe Extension TKJ (L = 300 mm)

ID: 03969363

Price: €1,340.00

Quick Overview: TKJ extension made of aluminium and stainless steel with a length of 300 mm

Connection: TKJ / TKJ
Length (L): 300mm
Material: Aluminium / Stainless Steel

In Stock - Despatched 1-2 Days

HR-SP-110 Rack Extension (L = 110 mm)

ID: 03969486

Price: €171.00

Quick Overview: Sensor module rack extension to lift up HR-MP racks to a total height of 200 mm. Length 110 mm.

Length: 110mm
Diameter: 19.5mm

In Stock - Despatched 1-2 Days

HR-SP-160 Rack Extension (L = 160 mm)

ID: 03969487

Price: €171.00

Quick Overview: Sensor module rack extension to lift up HR-MP racks to a total height of 250 mm. Length 160 mm.

Length: 160mm
Diameter: 19.5mm

In Stock - Despatched 1-2 Days

Safety Pin for HR-MP Rack

ID: 03969488

Price: €51.00

Quick Overview: Safety / locking pin for the 3-port probe module and arm of the rack

Length: 22mm
Diameter: 8mm

In Stock - Despatched 1-2 Days

HA-M Probe Extension Kit M8

ID: 03969077

Price: €590.00

Quick Overview: Kit of three M8 Extensions (50 mm, 100 mm and 200 mm) made of aluminium and stainless steel.

Connection: M8 / M8
Material: Aluminium / Stainless Steel

In Stock - Despatched 1-2 Days

6-Jaw Chuck with Flange (Aluminium / D = 125 mm)

ID: FC-125AL6

Price: €1,160.00

Quick Overview: Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.

Outside Diameter Chuck (D1): 125mm
Clamping Range: 5 - 156mm
Fixing: M4 / M8

In Stock - Despatched 1-2 Days

Diaclean (1 l)

ID: 8070-01001

Price: €17.00

Quick Overview: Surface cleaner for Coordinate Measuring Machines (CMM).

In Stock - Despatched 1-2 Days

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Price: €884.00

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Thread: M8

In Stock - Despatched 1-2 Days

Vee Locator

ID: FV-FEMALE

Price: €25.00

Quick Overview: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

In Stock - Despatched 1-2 Days

Vee Block Twin

ID: FV-VEETWIN

Price: €42.00

Quick Overview: The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.

In Stock - Despatched 1-2 Days

Guide Rail (L = 480 mm)

ID: FV-GUIDE480

Price: €236.00

Quick Overview: The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.

Plate Compatibility : FV-BP200/200C, FV-BP200/200F, FV-BP200/200P

In Stock - Despatched 1-2 Days

Standoff (D = 8 mm / L = 20 mm)

ID: FV-SO8__20

Price: €9.00

Quick Overview: Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 20 mm
Diameter: 8 mm

In Stock - Despatched 1-2 Days

Cone Adjustable (M4)

ID: FV-CONEADJ

Price: €14.00

Quick Overview: The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.

Thread: M4

In Stock - Despatched 1-2 Days

Fixture Baseplate 300x300x12mm (M8)

ID: FX-BP300__300

Price: €695.00

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Thread: M8

In Stock - Despatched 1-2 Days

Spring Pusher Standoff Clamp (D=8mm / L=10mm)

ID: FV-LATSML

Price: €32.00

Quick Overview: The lateral clamp comes with a tapered pressure button for easy positioning against a location face.

Length: 10 mm
Diameter: 8 mm

In Stock - Despatched 1-2 Days

Added to your shopping cart.

Previous
1(current)
2
3
4
5
Next

Product availability by store location

Hours

CMM

Filters