Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Price:  £436.00
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Part Number:  GB0122-0019
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
Delivery time 10-15 days
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Price:  £509.00
Quick Overview:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Part Number:  GB0122-0008
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
Delivery time 10-15 days
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Price:  £20.00
Quick Overview:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Part Number:  FX-SO/MAG
  • Length:  20 mm
  • Diameter:  16 mm
In Stock - Despatched 1-2 Days
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Price:  £36.00
Quick Overview:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/100
  • Size:  30 x 30 x 100 mm
In Stock - Despatched 1-2 Days
Toggle Clamp
Toggle Clamp
ID: FX-TOG
Price:  £126.00
Quick Overview:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Part Number:  FX-TOG
  • Thread:  M8
In Stock - Despatched 1-2 Days
SWIFT-CHECK
SWIFT-CHECK
ID: GB0096-2001
Price:  £4,845.00
Quick Overview:  SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.
  • Part Number:  GB0096-2001
  • CMM Compatibility:  GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
  • Software Compatibility:  PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
  • Run Time:  Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
  • Dimensions:  Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Sphere Diameter = 25 mm
Delivery > 25 days
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Price:  £7,773.00
Quick Overview: 

Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon HP-S-X5 tactile scanning sensor. For use with HP-S-X1 and HP-S-X3 tactile scanning sensors additional adapters can be ordered separately.
  • Part Number:  GB0122-1000
  • Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Delivery > 25 days
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Price:  £845.00
Quick Overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Part Number:  FX-BP300/400
  • Thread:  M8
In Stock - Despatched 1-2 Days
Tension Clamp (L = 39 mm)
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Price:  £30.00
Quick Overview:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Part Number:  FX-CTSML
  • Thread:  Without Thread
In Stock - Despatched 1-2 Days
Vee Locator
Vee Locator
ID: FV-FEMALE
Price:  £30.00
Quick Overview:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Part Number:  FV-FEMALE
In Stock - Despatched 1-2 Days
Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Price:  £43.00
Quick Overview:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Part Number:  FV-VEETWIN
In Stock - Despatched 1-2 Days
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Price:  £238.00
Quick Overview:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Part Number:  FV-GUIDE480
  • Plate Compatibility :  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Price:  £1,109.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125SS3
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range Outside (A):  1 - 126mm
  • Clamping Range Inside (I):  32 - 122mm
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Price:  £1,109.00
Quick Overview:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range:  5 - 156mm
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Price:  £1,355.00
Quick Overview:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160AL6
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range:  5 - 196mm
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Price:  £1,355.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160SS3
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range Outside (A):  1 - 150mm
  • Clamping Range Inside (I):  34 - 174mm
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Price:  £855.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-70SS3
  • Outside Diameter Chuck (D1):  70mm
  • Clamping Range Outside (A):  1 - 71mm
  • Clamping Range Inside (I):  18 - 66mm
  • Fixing:  M4 / M8
In Stock - Despatched 1-2 Days
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Price:  £845.00
Quick Overview: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-70SS3-NF
  • Outside Diameter Chuck (D1):  70mm
  • Clamping Range Outside (A):  1 - 71mm
  • Clamping Range Inside (I):  18 - 66mm
  • Fixing (G):  M3
Delivery time 10-15 days
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
ID: FC-160SS3-NF
Price:  £1,291.00
Quick Overview:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160SS3-NF
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range Outside (A):  1 - 150mm
  • Clamping Range Inside (I):  34 - 174mm
  • Fixing (G):  M6
Delivery time 10-15 days
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
ID: FC-125AL6-NF
Price:  £1,036.00
Quick Overview:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6-NF
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range:  5 - 156mm
  • Fixing (G):  M5
Delivery time 10-15 days