Skip to content Skip to navigation menu
As part of our new security upgrades, you are requested to reset your password
  1. Home
  2. Catalogue

Catalogue

Calibration Set for T-Nut 18 mm (0.70")
Calibration Set for T-Nut 18 mm (0.70")
ID: CALIBRATION SET 18
Price:  CHF500.00
Quick Overview:  Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 18
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
In Stock - Despatched 1-2 Days
Calibration Set for T-Nut 14 mm (0.55")
Calibration Set for T-Nut 14 mm (0.55")
ID: CALIBRATION SET 14
Price:  CHF489.00
Quick Overview:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 14
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
In Stock - Despatched 1-2 Days
Calibration Set for T-Nut 12 mm (0.47")
Calibration Set for T-Nut 12 mm (0.47")
ID: CALIBRATION SET 12
Price:  CHF489.00
Quick Overview:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 12
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
Delivery time 10-15 days
Tool Box 35.20-TB
Tool Box 35.20-TB
ID: 35.20-TB
Price:  CHF57.00
Quick Overview:  Tool kit for installation and maintenance of Tool Setter TS35.20. Tool box contents see description.
  • Part Number:  35.20-TB
  • Compatibility:  TS35.20
In Stock - Despatched 1-2 Days
Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
ID: 41.00-VE115
Price:  CHF570.00
Quick Overview: 

Extension made of carbon fibre, Ø25 mm, length 115 mm. Used to extend the length of measuring units on machine tools.
  • Part Number:  41.00-VE115
  • Material:  Carbon Fibre
  • Length:  115
  • Diameter:  25 mm
  • External Thread:  M16x1
Delivery time 10-15 days
Measuring Unit Extension (L = 430 mm / 16.93")
Measuring Unit Extension (L = 430 mm / 16.93")
ID: 41.00-VE430
Price:  CHF580.00
Quick Overview: 

Extension made of carbon fibre, Ø25 mm, length 430 mm. Used to extend the length of measuring units on machine tools.
  • Part Number:  41.00-VE430
  • Material:  Carbon Fibre
  • Length:  430
  • Diameter:  25 mm
  • External Thread:  M16x1
Delivery time 10-15 days
Measuring Unit Extension (L = 450 mm / 17.72")
Measuring Unit Extension (L = 450 mm / 17.72")
ID: 41.00-VE450
Price:  CHF580.00
Quick Overview: 

Extension made of carbon fibre, Ø25 mm, length 450 mm. Used to extend the length of measuring units on machine tools.
  • Part Number:  41.00-VE450
  • Material:  Carbon Fibre
  • Length:  450
  • Diameter:  25 mm
  • External Thread:  M16x1
Delivery time 10-15 days
MCA45 T-Scan Sensor Automation Cable, 50 m
MCA45 T-Scan Sensor Automation Cable, 50 m
ID: 576197
Price:  CHF2,468.00
Quick Overview:  MCA45 T-Scan Sensor Automation Cable, 50 m
  • Part Number:  576197
  • System Compatibility:  Leica Absolute Tracker AT960
  • Length:  50
Delivery time 10-15 days
VISIUS 4.3.2
VISIUS 4.3.2
ID: VISIUS-4.3.2
Quick Overview: 

VISIUS provides an accessible entry point into automated optical coordinate metrology. Measuring range: X 400 mm, Y 300 mm, Z 200 mm
  • CMM Type:  OpticalCMM
  • Machine Condition:  New Machine
VISIUS 5.4.2
VISIUS 5.4.2
ID: VISIUS-5.4.2
Quick Overview: 

VISIUS provides an accessible entry point into automated optical coordinate metrology. Measuring range: X 500 mm, Y 400 mm, Z 200 mm
  • CMM Type:  OpticalCMM
  • Machine Condition:  New Machine
VISIUS 3.2.2
VISIUS 3.2.2
ID: VISIUS-3.2.2
Quick Overview: 

VISIUS provides an accessible entry point into automated optical coordinate metrology. Measuring range: X 300 mm, Y 200 mm, Z 200 mm
  • CMM Type:  OpticalCMM
  • Machine Condition:  New Machine
Target D1=15 mm retro coded No. 151-500 (M)
Target D1=15 mm retro coded No. 151-500 (M)
ID: ART111277
Price:  CHF2,780.00
Quick Overview:  Set consisting of retroreflective coded measurement targets with numbers 151-500. Ring diameter of center D1=15 mm. For magnetic adhering to the workpiece.
  • Part Number:  ART111277
  • Coding:  14 Bit
  • Number Range:  151 - 500
  • Reflection Type:  Retro-reflective
  • Diameter (D1):  15
Delivery time 10-15 days
Tube Holder (Ø 0-20 mm)
Tube Holder (Ø 0-20 mm)
ID: EBD-12865
Price:  CHF1,750.00
Quick Overview:  Fixture for securely holding tubes during measurement. Compatible with tubes up to Ø20 mm.
  • Max. Tube Diameter:  0 - 20
  • Part Number:  EBD-12865
Delivery > 25 days
Tube Holder (Ø 20-70 mm)
Tube Holder (Ø 20-70 mm)
ID: EBD-12866
Price:  CHF1,850.00
Quick Overview:  Fixture for securely holding tubes during measurement. Compatible with tubes from Ø20 mm to Ø70 mm.
  • Max. Tube Diameter:  20 - 70
  • Part Number:  EBD-12866
Delivery > 25 days
Drawing Reading (Web Training 1 Day)
Drawing Reading (Web Training 1 Day)
ID: RE54T153-00039
Price:  CHF546.25
Quick Overview: 

Target Group: Anyone who needs basic knowledge in reading technical drawings or needs to refresh their skills in reading technical drawings.
Course Goals: To provide basic knowledge to build upon. After completing the course, participants will be able to read and interpret a simple machine drawing.
Prerequisites: No special prerequisites are required other than computer literacy.
Other Information: To complete the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
GD&T (Web Training 1.5 Days)
GD&T (Web Training 1.5 Days)
ID: RE54T153-00032
Price:  CHF598.00
Quick Overview: 

Target Audience: Those who need insight into form and position tolerances, such as designers, planners, production technicians, CMM operators, buyers, and salespeople.
Course Objectives: To provide insight into standards for form and position tolerances, notation, and what the requirements entail.
Prerequisites: Basic knowledge of technical drawing reading, computer literacy.
Additional Information: To complete the course, you need access to a computer and the internet.  
For more information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
GD&T with GPS Requirements (Web Training 1.5 Days / Classroom Training 2 Days)
GD&T with GPS Requirements (Web Training 1.5 Days / Classroom Training 2 Days)
ID: RE54T153-00057
Price:  CHF1,932.00
Quick Overview: 

Target Group: Engineers & Designers
Course Goals. To provide in-depth knowledge about form and position tolerances, notation, and setting requirements.
Prerequisites: Basic knowledge in reading technical drawings.
Other Information: To complete the self-study part of the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
GD&T CMM (Web Training 1.5 Days / Classroom Training 3 Days)
GD&T CMM (Web Training 1.5 Days / Classroom Training 3 Days)
ID: RE54T153-00033
Price:  CHF2,248.25
Quick Overview: 

Target Group: Metrologists, quality control planners, measuring machine programmers, and designers.
Course Goals: To provide in-depth knowledge about form and position tolerances, notation, the meaning of the requirements, and how the requirements can be evaluated.
Prerequisites: Basic knowledge in reading technical drawings. Experience in design or as a user or programmer of measuring machines.
Other Information: To complete the self-study part of the course, you need access to a computer and the internet.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
PC-DMIS Portable, Laser Scanning (Classroom Training 1 Day)
PC-DMIS Portable, Laser Scanning (Classroom Training 1 Day)
ID: RE54T153-00055
Price:  CHF816.50
Quick Overview: 

Target Group: New users of measuring arms with PC-DMIS Laser, as well as those who wish to strengthen their basic knowledge in laser scanning.
Course Goals: To provide the basic knowledge required to use laser scanning with the measuring arm in the PC-DMIS software.
Prerequisites: Computer literacy, basic knowledge in reading technical drawings, and basic knowledge of PC-DMIS Measuring Arm.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com
Workshop Measurement and Drawings, Basic (Classroom Training 3 Days)
Workshop Measurement and Drawings, Basic (Classroom Training 3 Days)
ID: RE54T153-00004
Price:  CHF1,414.50
Quick Overview: 

Target Group: Anyone who needs basic knowledge in reading technical drawings and measurement with hand measuring tools. Aspiring workshop technicians, machine operators, inspectors, and metrologists.
Course Goals: To provide basic knowledge to build upon in the areas of reading technical drawings and workshop metrology.
Prerequisites: No special prerequisites are required.
Additional Information: Contact us by phone at +46 16 160805 or via email at training.se@hexagon.com