text.skipToContent text.skipToNavigation
Dans le cadre de nos nouvelles mises à niveau de sécurité, il vous est demandé de réinitialiser votre mot de passe
  1. Accueil
  2. Catalogue
  3. MMT
  4. Bridages

Bridages

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
N° : GB0122-0019
Prix:  CHF480.00
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Part Number:  GB0122-0019
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
Livraison sous 10 à 15 jours
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
N° : GB0122-0008
Prix:  CHF560.00
Vue d'ensemble sommaire:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Part Number:  GB0122-0008
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
Livraison sous 10 à 15 jours
Kinematic Fixture Plate 300x300mm (Plain)
Kinematic Fixture Plate 300x300mm (Plain)
N° : KPP-300__300
Prix:  CHF546.00
Vue d'ensemble sommaire:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Part Number:  KPP-300/300
  • Plate Compatibility :  KB-250/250, KB-UNIVL
En stock - Livraison sous 1 à 2 jours
Kinematic Fixture Plate 500x500mm (Plain)
Kinematic Fixture Plate 500x500mm (Plain)
N° : KPP-500__500
Prix:  CHF835.00
Vue d'ensemble sommaire:  The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
  • Part Number:  KPP-500/500
  • Plate Compatibility :  KB-400/400, KB-UNIVL
En stock - Livraison sous 1 à 2 jours
Kinematic Fixture Plate 300x300 mm (M8)
Kinematic Fixture Plate 300x300 mm (M8)
N° : KPT-300__300
Prix:  CHF815.00
Vue d'ensemble sommaire:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Part Number:  KPT-300/300
  • Plate Compatibility :  KB-250/250, KB-UNIVL
En stock - Livraison sous 1 à 2 jours
Kinematic Base for Fixture Plate 500x500mm
Kinematic Base for Fixture Plate 500x500mm
N° : KB-400__400
Prix:  CHF1,020.00
Vue d'ensemble sommaire:  The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
  • Part Number:  KB-400/400
  • Plate Compatibility :  KPP-500/500, KPT-500/500
En stock - Livraison sous 1 à 2 jours
Universal Kinematic Fixture Base
Universal Kinematic Fixture Base
N° : KB-UNIVL
Prix:  CHF690.00
Vue d'ensemble sommaire:  The universal kinematic base remains on the machine and ensures accurate, highly repeatable placement of kinematic fixture plates without manual alignment. It can be used with any size of kinematic fixture plates.
  • Part Number:  KB-UNIVL
  • Plate Compatibility :  KPP-300/300, KPT-300/300, KPP-400/400, KPT-400/400, KPP-500/500, KPT-500/500
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
N° : FC-125SS3
Prix:  CHF1,220.00
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125SS3
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range Outside (A):  1 - 126mm
  • Clamping Range Inside (I):  32 - 122mm
  • Fixing:  M4 / M8
En stock - Livraison sous 1 à 2 jours
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
N° : FC-125AL6
Prix:  CHF1,220.00
Vue d'ensemble sommaire:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range:  5 - 156mm
  • Fixing:  M4 / M8
En stock - Livraison sous 1 à 2 jours
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
N° : FC-160AL6
Prix:  CHF1,490.00
Vue d'ensemble sommaire:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160AL6
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range:  5 - 196mm
  • Fixing:  M4 / M8
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
N° : FC-160SS3
Prix:  CHF1,490.00
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160SS3
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range Outside (A):  1 - 150mm
  • Clamping Range Inside (I):  34 - 174mm
  • Fixing:  M4 / M8
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
N° : FC-70SS3
Prix:  CHF940.00
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-70SS3
  • Outside Diameter Chuck (D1):  70mm
  • Clamping Range Outside (A):  1 - 71mm
  • Clamping Range Inside (I):  18 - 66mm
  • Fixing:  M4 / M8
En stock - Livraison sous 1 à 2 jours
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
N° : FC-70SS3-NF
Prix:  930,00 €
Vue d'ensemble sommaire: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-70SS3-NF
  • Outside Diameter Chuck (D1):  70mm
  • Clamping Range Outside (A):  1 - 71mm
  • Clamping Range Inside (I):  18 - 66mm
  • Fixing (G):  M3
Livraison sous 10 à 15 jours
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=160 mm)
N° : FC-160SS3-NF
Prix:  1 420,00 €
Vue d'ensemble sommaire:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160SS3-NF
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range Outside (A):  1 - 150mm
  • Clamping Range Inside (I):  34 - 174mm
  • Fixing (G):  M6
Livraison sous 10 à 15 jours
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
N° : FC-125AL6-NF
Prix:  1 140,00 €
Vue d'ensemble sommaire:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6-NF
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range:  5 - 156mm
  • Fixing (G):  M5
Livraison sous 10 à 15 jours
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
N° : FC-160AL6-NF
Prix:  1 490,00 €
Vue d'ensemble sommaire:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160AL6-NF
  • Outside Diameter Chuck (D1):  160mm
  • Clamping Range:  5 - 196mm
  • Fixing (G):  M6
Livraison sous 10 à 15 jours
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
3-Jaw Chuck without Flange (Aluminium / D=240 mm)
N° : FC-240AL3-NF
Prix:  3 300,00 €
Vue d'ensemble sommaire:  Three-jaw chuck made from Aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-240AL3-NF
  • Outside Diameter Chuck (D1):  240mm
  • Clamping Range Outside (A):  1 - 288mm
  • Clamping Range Inside (I):  35 - 295mm
  • Fixing (G):  M8
Livraison sous 10 à 15 jours
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
N° : FC-125SS3-NF
Prix:  1 140,00 €
Vue d'ensemble sommaire: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125SS3-NF
  • Outside Diameter Chuck (D1):  125mm
  • Clamping Range Outside (A):  1 - 126mm
  • Clamping Range Inside (I):  32 - 122mm
  • Fixing (G):  M5
Livraison sous 10 à 15 jours
3-Jaw 125 Inside Clamping Set (Stainless Steel)
3-Jaw 125 Inside Clamping Set (Stainless Steel)
N° : FC-JS-125SS3-I
Prix:  418,00 €
Vue d'ensemble sommaire: 

3-Jaw clamping set for inside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Part Number:  FC-JS-125SS3-I
Livraison sous 10 à 15 jours
3-Jaw 125 Outside Clamping Set (Stainless Steel)
3-Jaw 125 Outside Clamping Set (Stainless Steel)
N° : FC-JS-125SS3-E
Prix:  418,00 €
Vue d'ensemble sommaire: 

3-Jaw clamping set for outside clamping. Made of stainless steel, vacuum hardened and polished. Compatible with stainless steel 3-jaw chucks, Ø125 mm.
  • Part Number:  FC-JS-125SS3-E
Livraison sous 10 à 15 jours