text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prijs:  €84.00
Beknopt overzicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Part Number:  FX-PR30HINGE
Op voorraad - verzending 1-2 dagen
Spring Nut (M8)
Spring Nut (M8)
ID: FX-M8SPRGNUT
Prijs:  €33.00
Beknopt overzicht:  Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Part Number:  FX-M8SPRGNUT
Op voorraad - verzending 1-2 dagen
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
Prijs:  €54.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Part Number:  FX-LATMED
  • Length:  20 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x150mm
Pillar 30x30x150mm
ID: FX-PR30__150
Prijs:  €43.00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/150
  • Size:  30 x 30 x 150 mm
Op voorraad - verzending 1-2 dagen
Tension Post (M8)
Tension Post (M8)
ID: FX-POST
Prijs:  €27.00
Beknopt overzicht:  This tension post is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M8 elements.
  • Part Number:  FX-POST
  • Thread:  M8
Op voorraad - verzending 1-2 dagen
Pillar Kit
Pillar Kit
ID: FX-PILLAR__KIT
Prijs:  €1,020.00
Beknopt overzicht:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Part Number:  FX-PILLAR/KIT
Op voorraad - verzending 1-2 dagen
Standoff Support (M8)
Standoff Support (M8)
ID: FX-SO__SUPP
Prijs:  €22.00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Part Number:  FX-SO/SUPP
  • Length:  10 mm
  • Diameter:  15 mm
Op voorraad - verzending 1-2 dagen
Standoff Magnet (D = 16 mm / L = 20 mm)
Standoff Magnet (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Prijs:  €22.00
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Part Number:  FX-SO/MAG
  • Length:  20 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen
Pillar Base Plate
Pillar Base Plate
ID: FX-PR30PLATE
Prijs:  €49.00
Beknopt overzicht:  The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
  • Part Number:  FX-PR30PLATE
  • Size:  130 x 30 mm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x100mm
Pillar 30x30x100mm
ID: FX-PR30__100
Prijs:  €40.00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/100
  • Size:  30 x 30 x 100 mm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x250mm
Pillar 30x30x250mm
ID: FX-PR30__250
Prijs:  €49.00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
  • Part Number:  FX-PR30/250
  • Size:  30 x 30 x 250 mm
Op voorraad - verzending 1-2 dagen
Pillar 30x30x50mm
Pillar 30x30x50mm
ID: FX-PR30__50
Prijs:  €38.00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/50
  • Size:  30 x 30 x 50 mm
Op voorraad - verzending 1-2 dagen
Standoff Pin M8 (D= 16 mm/L= 20 mm)
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Prijs:  €22.00
Beknopt overzicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Part Number:  FX-SO/PIN
  • Length:  20 mm
  • Diameter:  16 mm
Op voorraad - verzending 1-2 dagen
Slider Block (M8)
Slider Block (M8)
ID: FX-SLIDER
Prijs:  €26.00
Beknopt overzicht:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Part Number:  FX-SLIDER
  • Thread:  M8
Op voorraad - verzending 1-2 dagen
Pillar 30x30x200mm
Pillar 30x30x200mm
ID: FX-PR30__200
Prijs:  €46.00
Beknopt overzicht:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Part Number:  FX-PR30/200
  • Size:  30 x 30 x 200 mm
Op voorraad - verzending 1-2 dagen
Swift-Fix - Silver Kit
Swift-Fix - Silver Kit
ID: FX-SILVER__KIT
Prijs:  €1,690.00
Beknopt overzicht:  The Swift-Fix Silver Kit includes 66 components for building fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Part Number:  FX-SILVER/KIT
  • Thread:  M8
  • Application:  CMM, Portable Measuring Arm
Op voorraad - verzending 1-2 dagen
Spring Plunger
Spring Plunger
ID: FX-PLUNGER
Prijs:  €95.00
Beknopt overzicht:  The spring plunger exerts low forces to hold sensible parts in position.
  • Part Number:  FX-PLUNGER
  • Thread:  M8
Op voorraad - verzending 1-2 dagen
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
ID: FX-LATLGE
Prijs:  €63.00
Beknopt overzicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Part Number:  FX-LATLGE
  • Length:  20 mm
  • Diameter:  20 mm
Op voorraad - verzending 1-2 dagen
Spring Clamp (M8)
Spring Clamp (M8)
ID: FX-SPRING
Prijs:  €50.00
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Part Number:  FX-SPRING
  • Thread:  Without Thread
Op voorraad - verzending 1-2 dagen
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prijs:  €10.00
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Part Number:  FX-THUMB
  • Thread:  M8
Op voorraad - verzending 1-2 dagen