Zum Inhalt springen Zum Navigationsmenü springen
Im Rahmen unserer neuen Sicherheitsmaßnahmen bitten wir Sie, Ihr Passwort zurückzusetzen
  1. Startseite
  2. Catalogue
  3. CMM
  4. Fixtures

Fixtures

Vee Locator
Vee Locator
ID: FV-FEMALE
Preis:  CHF33.00
Schnellübersicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Part Number:  FV-FEMALE
Auf Lager - Versand 1-2 Tage
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Preis:  CHF279.00
Schnellübersicht:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Part Number:  FV-GUIDE480
  • Plate Compatibility :  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Auf Lager - Versand 1-2 Tage
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Preis:  CHF10.00
Schnellübersicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FV-SO8/20
  • Length:  20 mm
  • Diameter:  8 mm
Auf Lager - Versand 1-2 Tage
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Preis:  CHF22.00
Schnellübersicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Part Number:  FV-CONEADJ
  • Thread:  M4
Auf Lager - Versand 1-2 Tage
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
Preis:  CHF39.00
Schnellübersicht:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Part Number:  FV-LATSML
  • Length:  10 mm
  • Diameter:  8 mm
Auf Lager - Versand 1-2 Tage
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Preis:  CHF10.00
Schnellübersicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FV-SO8/25
  • Length:  25 mm
  • Diameter:  8 mm
Auf Lager - Versand 1-2 Tage
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Preis:  CHF27.00
Schnellübersicht:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Part Number:  FX-TOOLS
Auf Lager - Versand 1-2 Tage
Universal Joint
Universal Joint
ID: FX-UNI__JOINT
Preis:  CHF95.00
Schnellübersicht:  Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Part Number:  FX-UNI/JOINT
  • Thread:  M8
Auf Lager - Versand 1-2 Tage
Vee Locator
Vee Locator
ID: FX-VEE
Preis:  CHF77.00
Schnellübersicht:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Part Number:  FX-VEE
  • Thread:  M8
Auf Lager - Versand 1-2 Tage
Toggle Clamp
Toggle Clamp
ID: FX-TOG
Preis:  CHF139.00
Schnellübersicht:  Ideal when high-force clamping is required, the toggle clamp is quick and easy to use and allows bi-directional adjustment of the fixture.
  • Part Number:  FX-TOG
  • Thread:  M8
Auf Lager - Versand 1-2 Tage
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Preis:  CHF22.00
Schnellübersicht:  The angle block slider enables users to position elements horizontally on the base plate.
  • Part Number:  FV-ANGSLIDER
  • Thread:  M4
Auf Lager - Versand 1-2 Tage
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Preis:  CHF19.00
Schnellübersicht:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Part Number:  FV-SO/PIN
  • Length:  10 mm
  • Diameter:  8 mm
Auf Lager - Versand 1-2 Tage
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Preis:  CHF52.00
Schnellübersicht:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
  • Part Number:  FV-CNRBRKT
Auf Lager - Versand 1-2 Tage
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Preis:  CHF19.00
Schnellübersicht:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Part Number:  FV-POST
  • Thread:  M4
Auf Lager - Versand 1-2 Tage
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Preis:  CHF18.00
Schnellübersicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Part Number:  FV-SLIDER
  • Thread:  M4
Auf Lager - Versand 1-2 Tage
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Preis:  CHF18.00
Schnellübersicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Part Number:  FV-SO/MAG
  • Length:  10 mm
  • Diameter:  8 mm
Auf Lager - Versand 1-2 Tage
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Preis:  CHF15.00
Schnellübersicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Part Number:  FV-CONE
  • Thread:  M4
Auf Lager - Versand 1-2 Tage
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Preis:  CHF1,220.00
Schnellübersicht:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125SS3
  • Outside Diameter Chuck (D1):  125
  • Clamping Range Outside (A):  1 - 126
  • Clamping Range Inside (I):  32 - 122
  • Fixing:  M4 / M8
Auf Lager - Versand 1-2 Tage
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Preis:  CHF1,318.00
Schnellübersicht:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-125AL6
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing:  M4 / M8
Auf Lager - Versand 1-2 Tage
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
ID: FC-160AL6
Preis:  CHF1,565.00
Schnellübersicht:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Part Number:  FC-160AL6
  • Outside Diameter Chuck (D1):  160
  • Clamping Range:  5 - 196
  • Fixing:  M4 / M8
Auf Lager - Versand 1-2 Tage