text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen

Bevestigingen

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Prijs:  zł2,064.00
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Part Number:  GB0122-0019
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40
Levertijd 10-15 dagen
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Prijs:  zł2,408.00
Beknopt overzicht:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Part Number:  GB0122-0008
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60
Levertijd 10-15 dagen
Spring Clamp
Spring Clamp
ID: FX-SPRING
Prijs:  zł215.00
Beknopt overzicht: 

Spring clamps securely hold parts with minimal force while maintaining unobstructed measurement access.
  • Part Number:  FX-SPRING
  • Thread:  Without Thread
Op voorraad - verzending 1-2 dagen
Thumb Screw M8
Thumb Screw M8
ID: FX-THUMB
Prijs:  zł47.00
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Part Number:  FX-THUMB
  • Thread:  M8
Op voorraad - verzending 1-2 dagen
Standoff (D = 16 mm / L = 20 mm)
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prijs:  zł77.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO16/20
  • Thread:  M8
  • Diameter:  16 mm
  • Length:  20 mm
Op voorraad - verzending 1-2 dagen
Hinge Pivot With Handle
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prijs:  zł361.00
Beknopt overzicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Part Number:  FX-PR30HINGE
Op voorraad - verzending 1-2 dagen
Swift-Fix Tool Kit
Swift-Fix Tool Kit
ID: FX-TOOLS
Prijs:  zł116.00
Beknopt overzicht:  The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Part Number:  FX-TOOLS
Op voorraad - verzending 1-2 dagen
Pillar Kit
Pillar Kit
ID: FX-PILLAR__KIT
Prijs:  zł4,386.00
Beknopt overzicht:  The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
  • Part Number:  FX-PILLAR/KIT
Op voorraad - verzending 1-2 dagen
Standoff Support (M8)
Standoff Support (M8)
ID: FX-SO__SUPP
Prijs:  zł95.00
Beknopt overzicht:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Part Number:  FX-SO/SUPP
  • Thread:  M8
  • Diameter:  15 mm
  • Length:  10 mm
Op voorraad - verzending 1-2 dagen
Standoff (D = 20 mm / L = 30 mm)
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Prijs:  zł77.00
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Part Number:  FX-SO20/30
  • Thread:  M8
  • Diameter:  20 mm
  • Length:  30 mm
Op voorraad - verzending 1-2 dagen
Kinematic Fixture Plate 500x500x16 mm (M8)
Kinematic Fixture Plate 500x500x16 mm (M8)
ID: KPT-500__500
Prijs:  zł8,824.00
Beknopt overzicht:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Part Number:  KPT-500/500
  • Plate Compatibility :  KB-400/400, KB-UNIVL
Op voorraad - verzending 1-2 dagen
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck with Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6
Prijs:  zł5,667.00
Beknopt overzicht: 

6-jaw chuck with flange made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-125AL6
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing:  M4 / M8
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
3-Jaw Chuck with Flange (Aluminium / Ø 240 mm)
ID: FC-240AL3
Prijs:  zł15,975.00
Beknopt overzicht: 

3-jaw chuck with flange made of aluminium with an outside diameter of 240 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-240AL3
  • Outside Diameter Chuck (D1):  240
  • Clamping Range Outside (A):  1 - 288
  • Clamping Range Inside (I):  35 - 295
  • Fixing:  M8
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / Ø 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / Ø 160 mm)
ID: FC-160SS3
Prijs:  zł6,730.00
Beknopt overzicht: 

3-jaw chuck with flange made of stainless steel with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-160SS3
  • Outside Diameter Chuck (D1):  160
  • Clamping Range Outside (A):  1 - 150
  • Clamping Range Inside (I):  34 - 174
  • Fixing:  M4 / M8
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck without Flange (Stainless Steel / Ø 70 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 70 mm)
ID: FC-70SS3-NF
Prijs:  zł3,999.00
Beknopt overzicht: 

3-jaw chuck made of stainless steel with an outside diameter of 70 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-70SS3-NF
  • Outside Diameter Chuck (D1):  70
  • Clamping Range Outside (A):  1 - 71
  • Clamping Range Inside (I):  18 - 66
  • Fixing (G):  M3
Levertijd 10-15 dagen
3-Jaw Chuck without Flange (Stainless Steel / Ø 160 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 160 mm)
ID: FC-160SS3-NF
Prijs:  zł6,106.00
Beknopt overzicht: 

3-jaw chuck made of stainless steel with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-160SS3-NF
  • Outside Diameter Chuck (D1):  160
  • Clamping Range Outside (A):  1 - 150
  • Clamping Range Inside (I):  34 - 174
  • Fixing (G):  M6
Levertijd 10-15 dagen
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 125 mm)
ID: FC-125AL6-NF
Prijs:  zł4,902.00
Beknopt overzicht: 

6-jaw chuck made of aluminium with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-125AL6-NF
  • Outside Diameter Chuck (D1):  125
  • Clamping Range:  5 - 156
  • Fixing (G):  M5
Levertijd 10-15 dagen
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
6-Jaw Chuck without Flange (Aluminium / Ø 160 mm)
ID: FC-160AL6-NF
Prijs:  zł6,407.00
Beknopt overzicht: 

6-jaw chuck made of aluminium with an outside diameter of 160 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-160AL6-NF
  • Outside Diameter Chuck (D1):  160
  • Clamping Range:  5 - 196
  • Fixing (G):  M6
Levertijd 10-15 dagen
3-Jaw Chuck without Flange (Aluminium / Ø 240 mm)
3-Jaw Chuck without Flange (Aluminium / Ø 240 mm)
ID: FC-240AL3-NF
Prijs:  £ 3.000,00
Beknopt overzicht: 

3-jaw chuck made of aluminium with an outside diameter of 240 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-240AL3-NF
  • Outside Diameter Chuck (D1):  240
  • Clamping Range Outside (A):  1 - 288
  • Clamping Range Inside (I):  35 - 295
  • Fixing (G):  M8
Levertijd 10-15 dagen
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
3-Jaw Chuck without Flange (Stainless Steel / Ø 125 mm)
ID: FC-125SS3-NF
Prijs:  £ 1.036,00
Beknopt overzicht: 

3-jaw chuck made of stainless steel with an outside diameter of 125 mm. Designed for internal and external clamping of workpieces on coordinate measuring machines (CMMs).
  • Part Number:  FC-125SS3-NF
  • Outside Diameter Chuck (D1):  125
  • Clamping Range Outside (A):  1 - 126
  • Clamping Range Inside (I):  32 - 122
  • Fixing (G):  M5
Levertijd 10-15 dagen