Accessories

Tool kit for installation and maintenance of Infrared Touch Probe IRP25.41 and Radio-wave Touch Probe RWP20.41. Tool box contents see description.

Extension made of stainless steel (Ø50 mm). For mounting between the Hexagon touch probe and the shank, to extend the length. Length: 50 mm / 1.97"

Extension made of stainless steel (Ø50 mm). For mounting between the Hexagon touch probe and the shank, to extend the length. Length: 100 mm / 3.94"

Extension made of stainless steel (Ø50 mm). For mounting between the Hexagon touch probe and the shank, to extend the length. Length: 75 mm / 2.96"

Connection cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112 for the operation of touch probes and tool setters with only one cable. Shielded cable with D-SUB plug and open wires. Length: 2 m / 6.6'

Extension cable with M12/F08 and M12/M08 plugs for Hexagon connecting cables. Length: 10 m / 32.8'

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 10 m / 32.8'

Universal connecting cable to transmit measuring signals from Hexagon receivers and tool setters to Fanuc High Speed Skip controls. Shielded cable with M12/F08 plug and open wires. Length: 6 m / 19.7'

Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded cable with M12/F08 and D-SUB HD/M15 plug. Length: 15 m / 49.2'

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 30 m / 98.4'

Mounting bracket made of stainless steel for mounting and alignment of Hexagon infrared receiver IRR91.42 in machine tools.

Mounting bracket made of stainless steel for mounting and alignment of Hexagon infrared receiver IRR91.50 in machine tools.

Taper shank CAT40 for use with Hexagon touch probes with D11 connection and bidirectional probe activation in the machine tool.

Taper shank SK40 for use with Hexagon touch probes with D11 connection and bidirectional probe activation in the machine tool.

Universal connecting cable to transmit measuring signals from Hexagon receivers and tool setters to Siemens controls. Length:  2 m / 6.6'

Connecting cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded, drag chain capable cable with M23/F12 plug and open wires. Length: 15 m / 49.2'

Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded cable with D-SUB HD/M15 plug and open wires. Length: 2 m / 6.6'

Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded cable with M12/F08 and D-SUB HD/M15 plugs. Length: 5 m / 16.4'