text.skipToContent text.skipToNavigation
V rámci nových bezpečnostních vylepšení vás žádáme o obnovení hesla
  1. Domů
  2. Katalog
  3. SMS
  4. Upínání

Upínání

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  £436.00
Rychlý přehled:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Objednávací kód:  GB0122-0019
  • Kompatibilita:  HP-S-X3 Stylus Clampings
  • Průměr:  40
Odeslání do 10-15 dnů
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  £509.00
Rychlý přehled:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Objednávací kód:  GB0122-0008
  • Kompatibilita:  HP-S-X1 Stylus Clampings
  • Průměr:  60
Odeslání do 10-15 dnů
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Cena:  £1,109.00
Rychlý přehled:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-125SS3
  • Vnější průměr sklíčidla (D1):  125
  • Vnější upínací rozsah (A):  1 - 126
  • Vnitřní upínací rozsah (I):  32 - 122
  • Materiál:  Nerezová ocel
Skladem - Odeslání do 1-2 dnů
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
SKU: FC-125AL6
Price:  £1,109.00
Quick overview:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-125AL6
  • Vnější průměr sklíčidla (D1):  125
  • Upínací rozsah:  5 - 156
  • Materiál:  Hliník
  • Upevnění:  M4 / M8
In Stock
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
6-Jaw Chuck with Flange (Aluminium / D = 160 mm)
SKU: FC-160AL6
Price:  £1,355.00
Quick overview:  Six-jaw chuck made from aluminium with an outside diameter of 160 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-160AL6
  • Vnější průměr sklíčidla (D1):  160
  • Upínací rozsah:  5 - 196
  • Materiál:  Hliník
  • Upevnění:  M4 / M8
In Stock
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
SKU: FC-160SS3
Price:  £1,355.00
Quick overview:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-160SS3
  • Vnější průměr sklíčidla (D1):  160
  • Vnější upínací rozsah (A):  1 - 150
  • Vnitřní upínací rozsah (I):  34 - 174
  • Materiál:  Nerezová ocel
In Stock
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
6-Jaw Chuck without Flange (Aluminium / D=125 mm)
SKU: FC-125AL6-NF
Price:  £1,036.00
Quick overview:  Six-jaw chuck made from Aluminium with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-125AL6-NF
  • Vnější průměr sklíčidla (D1):  125
  • Upínací rozsah:  5 - 156
  • Materiál:  Hliník
  • Upevnění (G):  M5
Available
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
6-Jaw Chuck without Flange (Aluminium / D=160 mm)
SKU: FC-160AL6-NF
Price:  £1,355.00
Quick overview:  Six-jaw chuck made from Aluminium with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-160AL6-NF
  • Vnější průměr sklíčidla (D1):  160
  • Upínací rozsah:  5 - 196
  • Materiál:  Hliník
  • Upevnění (G):  M6
Available
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=125 mm)
SKU: FC-125SS3-NF
Price:  £1,036.00
Quick overview: 

3-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-125SS3-NF
  • Vnější průměr sklíčidla (D1):  125
  • Vnější upínací rozsah (A):  1 - 126
  • Vnitřní upínací rozsah (I):  32 - 122
  • Materiál:  Nerezová ocel
Available
Fixture Baseplate 300x400x12mm (M8)
Fixture Baseplate 300x400x12mm (M8)
SKU: FX-BP300__400
Price:  £845.00
Quick overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Objednávací kód:  FX-BP300/400
  • Závit:  M8
In Stock
Vee Locator
Vee Locator
SKU: FV-FEMALE
Price:  £30.00
Quick overview:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Objednávací kód:  FV-FEMALE
In Stock
Vee Block Twin
Vee Block Twin
SKU: FV-VEETWIN
Price:  £43.00
Quick overview:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Objednávací kód:  FV-VEETWIN
In Stock
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
SKU: FV-GUIDE480
Price:  £238.00
Quick overview:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Objednávací kód:  FV-GUIDE480
  • Kompatibilita desek :  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
In Stock
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
SKU: FV-SO8__20
Price:  £9.00
Quick overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Objednávací kód:  FV-SO8/20
  • Délka:  20 mm
  • Průměr:  8 mm
In Stock
Cone Adjustable (M4)
Cone Adjustable (M4)
SKU: FV-CONEADJ
Price:  £20.00
Quick overview:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Objednávací kód:  FV-CONEADJ
  • Závit:  M4
In Stock
Fixture Baseplate 300x300x12mm (M8)
Fixture Baseplate 300x300x12mm (M8)
SKU: FX-BP300__300
Price:  £709.00
Quick overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Objednávací kód:  FX-BP300/300
  • Závit:  M8
In Stock
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
SKU: FV-LATSML
Price:  £35.00
Quick overview:  The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
  • Objednávací kód:  FV-LATSML
  • Délka:  10 mm
  • Průměr:  8 mm
In Stock
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
SKU: FV-SO8__25
Price:  £9.00
Quick overview:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Objednávací kód:  FV-SO8/25
  • Délka:  25 mm
  • Průměr:  8 mm
In Stock
Standoff Support (M4)
Standoff Support (M4)
SKU: FV-SOSUP
Price:  £16.00
Quick overview:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Objednávací kód:  FV-SOSUP
  • Délka:  6 mm
  • Průměr:  8 mm
In Stock
Fixture Baseplate 400x400x12mm (M8)
Fixture Baseplate 400x400x12mm (M8)
SKU: FX-BP400__400
Price:  £964.00
Quick overview:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Objednávací kód:  FX-BP400/400
  • Závit:  M8
In Stock