text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
6-Jaw Chuck with Flange (Aluminium / D = 125 mm)
ID: FC-125AL6
Prijs:  1 198,00 £
Beknopt overzicht:  Modular six-jaw chuck made from aluminium with an outside diameter of 125 mm. For highly flexible inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-125AL6
  • Vnější průměr sklíčidla (D1):  125
  • Upínací rozsah:  5 - 156
  • Materiál:  Hliník
  • Upevnění:  M4 / M8
Op voorraad - verzending 1-2 dagen
Vee Locator
ID: FV-FEMALE
Prijs:  30,00 £
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Objednávací kód:  FV-FEMALE
Op voorraad - verzending 1-2 dagen
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prijs:  9,00 £
Beknopt overzicht:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Objednávací kód:  FV-SO8/25
  • Délka:  25 mm
  • Průměr:  8 mm
Op voorraad - verzending 1-2 dagen
Centering Pin
ID: FV-MALE
Prijs:  22,00 £
Beknopt overzicht:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Objednávací kód:  FV-MALE
  • Závit:  M4
Op voorraad - verzending 1-2 dagen
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Prijs:  2 300,00 £
Beknopt overzicht:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Objednávací kód:  FV-FULLKIT
  • Závit:  M4
  • Určeno pro:  Multisensor CMM
Op voorraad - verzending 1-2 dagen
Flexible Vice
ID: FV-SLIDE
Prijs:  382,00 £
Beknopt overzicht:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Objednávací kód:  FV-SLIDE
  • Závit:  M4
Op voorraad - verzending 1-2 dagen
Articulated Fixture Arm (M8)
ID: FX-ARM
Prijs:  129,00 £
Beknopt overzicht:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Objednávací kód:  FX-ARM
  • Závit:  M8
Op voorraad - verzending 1-2 dagen
Slider Block (M4)
ID: FV-SLIDER
Prijs:  16,00 £
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Objednávací kód:  FV-SLIDER
  • Závit:  M4
Op voorraad - verzending 1-2 dagen
Standoff Magnet  (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prijs:  16,00 £
Beknopt overzicht:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Objednávací kód:  FV-SO/MAG
  • Délka:  10 mm
  • Průměr:  8 mm
Op voorraad - verzending 1-2 dagen
Spring Clamp (M4)
ID: FV-SPRING
Prijs:  42,00 £
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Objednávací kód:  FV-SPRING
  • Závit:  M4
Op voorraad - verzending 1-2 dagen
Resting Cone (M4)
ID: FV-CONE
Prijs:  14,00 £
Beknopt overzicht:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Objednávací kód:  FV-CONE
  • Závit:  M4
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Prijs:  1 109,00 £
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-125SS3
  • Vnější průměr sklíčidla (D1):  125
  • Vnější upínací rozsah (A):  1 - 126
  • Vnitřní upínací rozsah (I):  32 - 122
  • Materiál:  Nerezová ocel
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Aluminium / D = 240 mm)
ID: FC-240AL3
Prijs:  3 377,00 £
Beknopt overzicht:  Three-jaw chuck made from aluminium with an outside diameter of 240 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-240AL3
  • Vnější průměr sklíčidla (D1):  240
  • Vnější upínací rozsah (A):  1 - 288
  • Vnitřní upínací rozsah (I):  35 - 295
  • Materiál:  Hliník
Op voorraad - verzending 1-2 dagen
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Prijs:  1 423,00 £
Beknopt overzicht:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-160SS3
  • Vnější průměr sklíčidla (D1):  160
  • Vnější upínací rozsah (A):  1 - 150
  • Vnitřní upínací rozsah (I):  34 - 174
  • Materiál:  Nerezová ocel
Op voorraad - verzending 1-2 dagen
Spring Clamp (M8)
ID: FX-SPRING
Prijs:  45,00 £
Beknopt overzicht:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Objednávací kód:  FX-SPRING
  • Závit:  Bez závitu
Op voorraad - verzending 1-2 dagen
Thumb Screw M8
ID: FX-THUMB
Prijs:  10,00 £
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Objednávací kód:  FX-THUMB
  • Závit:  M8
Op voorraad - verzending 1-2 dagen
Standoff (D = 16 mm / L = 20 mm)
ID: FX-SO16__20
Prijs:  16,00 £
Beknopt overzicht:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Objednávací kód:  FX-SO16/20
  • Délka:  20 mm
  • Průměr:  16 mm
Op voorraad - verzending 1-2 dagen
Hinge Pivot With Handle
ID: FX-PR30HINGE
Prijs:  76,00 £
Beknopt overzicht:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Objednávací kód:  FX-PR30HINGE
Op voorraad - verzending 1-2 dagen
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Prijs:  30,00 £
Beknopt overzicht:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Objednávací kód:  FX-CTMED
  • Závit:  Bez závitu
Op voorraad - verzending 1-2 dagen
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Prijs:  £ 745,00
Beknopt overzicht:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Objednávací kód:  FX-BP300/300
  • Závit:  M8
Op voorraad - verzending 1-2 dagen