text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
  1. Pagina iniziale
  2. Catalogo
  3. CMM
  4. Attrezzaggi

Attrezzaggi

Vee Locator
Vee Locator
ID: FV-FEMALE
Prezzo:  30,00 £
Descrizione:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Objednávací kód:  FV-FEMALE
Disponibile - Spedizione in 1-2 Giorni
Guide Rail (L = 480 mm)
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
Prezzo:  254,00 £
Descrizione:  The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
  • Objednávací kód:  FV-GUIDE480
  • Kompatibilita desek :  FV-BP200/200C, FV-BP200/200F, FV-BP200/200P
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 8 mm / L = 20 mm)
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Prezzo:  9,00 £
Descrizione:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Objednávací kód:  FV-SO8/20
  • Délka:  20 mm
  • Průměr:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prezzo:  20,00 £
Descrizione:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Objednávací kód:  FV-CONEADJ
  • Závit:  M4
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 8 mm / L = 25 mm)
Standoff (D = 8 mm / L = 25 mm)
ID: FV-SO8__25
Prezzo:  9,00 £
Descrizione:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Objednávací kód:  FV-SO8/25
  • Délka:  25 mm
  • Průměr:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Standoff Support (M4)
Standoff Support (M4)
ID: FV-SOSUP
Prezzo:  16,00 £
Descrizione:  The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.
  • Objednávací kód:  FV-SOSUP
  • Délka:  6 mm
  • Průměr:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
Acryl Baseplate 200x200x10mm(M4)-Perimeter Pattern
ID: FV-BP200__200P
Prezzo:  540,00 £
Descrizione:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Objednávací kód:  FV-BP200/200P
  • Závit:  M4
Disponibile - Spedizione in 1-2 Giorni
Centering Pin
Centering Pin
ID: FV-MALE
Prezzo:  22,00 £
Descrizione:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Objednávací kód:  FV-MALE
  • Závit:  M4
Disponibile - Spedizione in 1-2 Giorni
Swift-Fix Vision - Starter Kit
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Prezzo:  1 140,00 £
Descrizione:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Objednávací kód:  FV-STARTERKIT
  • Závit:  M4
  • Určeno pro:  Multisensor CMM
Disponibile - Spedizione in 1-2 Giorni
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Prezzo:  382,00 £
Descrizione:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Objednávací kód:  FV-SLIDE
  • Závit:  M4
Disponibile - Spedizione in 1-2 Giorni
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
Acryl Baseplate 200x200x10mm (M4) - Cross Pattern
ID: FV-BP200__200C
Prezzo:  550,00 £
Descrizione:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Objednávací kód:  FV-BP200/200C
  • Závit:  M4
Disponibile - Spedizione in 1-2 Giorni
Angle Block Slider (M4)
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prezzo:  20,00 £
Descrizione:  The angle block slider enables users to position elements horizontally on the base plate.
  • Objednávací kód:  FV-ANGSLIDER
  • Závit:  M4
Disponibile - Spedizione in 1-2 Giorni
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prezzo:  17,00 £
Descrizione:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Objednávací kód:  FV-SO/PIN
  • Délka:  10 mm
  • Průměr:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  16,00 £
Descrizione:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Objednávací kód:  FV-SLIDER
  • Závit:  M4
Disponibile - Spedizione in 1-2 Giorni
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prezzo:  16,00 £
Descrizione:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Objednávací kód:  FV-SO/MAG
  • Délka:  10 mm
  • Průměr:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Resting Cone (M4)
Resting Cone (M4)
ID: FV-CONE
Prezzo:  14,00 £
Descrizione:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Objednávací kód:  FV-CONE
  • Závit:  M4
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Prezzo:  1 109,00 £
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-125SS3
  • Vnější průměr sklíčidla (D1):  125
  • Vnější upínací rozsah (A):  1 - 126
  • Vnitřní upínací rozsah (I):  32 - 122
  • Materiál:  Nerezová ocel
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 160 mm)
ID: FC-160SS3
Prezzo:  1 423,00 £
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 160 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-160SS3
  • Vnější průměr sklíčidla (D1):  160
  • Vnější upínací rozsah (A):  1 - 150
  • Vnitřní upínací rozsah (I):  34 - 174
  • Materiál:  Nerezová ocel
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
3-Jaw Chuck with Flange (Stainless Steel / D = 70 mm)
ID: FC-70SS3
Prezzo:  897,00 £
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-70SS3
  • Vnější průměr sklíčidla (D1):  70
  • Vnější upínací rozsah (A):  1 - 71
  • Vnitřní upínací rozsah (I):  18 - 66
  • Materiál:  Nerezová ocel
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
3-Jaw Chuck without Flange (Stainless Steel / D=70 mm)
ID: FC-70SS3-NF
Prezzo:  845,00 £
Descrizione: 

3-jaw chuck made from stainless steel with an outside diameter of 70 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Objednávací kód:  FC-70SS3-NF
  • Vnější průměr sklíčidla (D1):  70
  • Vnější upínací rozsah (A):  1 - 71
  • Vnitřní upínací rozsah (I):  18 - 66
  • Materiál:  Nerezová ocel
Tempi di consegna 10-15 Giorni