As part of our new security upgrades, you are requested to reset your password
Select your country or region
- United States
HR-X3-P Stylus Changer Port
SKU: M00-114-109-000
$401.00
Stock goods
Stylus changer port for scanning sensor HP-S-X3.
| Port Quantity | 1 |
| Related Probe | HP-S-X3 |
HR-X1-3P Stylus Changer Ports
SKU: M00-114-213-000
$317.00
Stock goods
Triple stylus changer port for scanning sensor HP-S-X1S.
| Port Quantity | 3 |
| Related Probe | HP-S-X1S |
Fixture Baseplate 300x400x12mm (M8)
SKU: FX-BP300__400
$880.00
Stock goods
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
| Thread | M8 |
Vee Locator
SKU: FV-FEMALE
$25.00
Stock goods
Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
Tension Clamp (L = 39 mm)
SKU: FX-CTSML
$30.00
Stock goods
Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
| Thread | Without Thread |
Kinematic Fixture Plate 500x500mm (Plain)
SKU: KPP-500__500
$860.00
Stock goods
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
| Plate Compatibility |
KB-400/400 KB-UNIVL |
Spring Clamp (M8)
SKU: FX-SPRING
$43.00
Stock goods
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
| Thread | Without Thread |
Kinematic Fixture Plate 300x300mm (Plain)
SKU: KPP-300__300
$430.00
Stock goods
The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
| Plate Compatibility |
KB-250/250 KB-UNIVL |
Thumb Screw M8
SKU: FX-THUMB
$8.00
Stock goods
With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
| Thread | M8 |
Vee Block Twin
SKU: FV-VEETWIN
$36.00
Stock goods
The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
Standoff (D = 8 mm / L = 20 mm)
SKU: FV-SO8__20
$8.00
Stock goods
Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
| Length | 20 mm |
| Diameter | 8 mm |
Standoff (D = 16 mm / L = 20 mm)
SKU: FX-SO16__20
$13.00
Stock goods
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
| Length | 20 mm |
| Diameter | 16 mm |
Cone Adjustable (M4)
SKU: FV-CONEADJ
$13.00
Stock goods
The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
| Thread | M4 |
Hinge Pivot With Handle
SKU: FX-PR30HINGE
$50.00
Stock goods
The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Tension Clamp (L = 66 mm)
SKU: FX-CTMED
$30.00
Stock goods
Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
| Thread | Without Thread |
Standoff (D = 16 mm / L = 100 mm)
SKU: FX-SO16__100
$22.00
Stock goods
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
| Length | 100 mm |
| Diameter | 16 mm |
Fixture Baseplate 300x300x12mm (M8)
SKU: FX-BP300__300
$680.00
Stock goods
This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
| Thread | M8 |
Spring Nut (M8)
SKU: FX-M8SPRGNUT
$28.00
Stock goods
Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
Swift-Fix - Starter Kit
SKU: FX-STARTER__KIT
$1,210.00
Stock goods
The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
| Thread | M8 |
| Application |
CMM Portable Measuring Arm |
Pillar Top Plate (10 x M8)
SKU: FX-SUB45__120
$57.00
Stock goods
The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
| Size | 120 x 45 x 12 mm |
Added to your shopping cart.
Product availability by store location
Hours