Skip to content Skip to navigation menu
  • 1(current)
  • 2
  • 3
89 Product(s) found
  • Vee Block Twin Vee Block Twin SKU: FV-VEETWIN
    $35.00

    Stock goods

    The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Spring Nut (M8) Spring Nut (M8) SKU: FX-M8SPRGNUT
    $28.00

    Stock goods

    Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Cone Adjustable (M4) Cone Adjustable (M4) SKU: FV-CONEADJ
    $12.00

    Stock goods

    The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
    Thread M4 
  • Hinge Pivot With Handle Hinge Pivot With Handle SKU: FX-PR30HINGE
    $51.00

    Stock goods

    The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Pillar Top Plate  (10 x M8) Pillar Top Plate (10 x M8) SKU: FX-SUB45__120
    $56.00

    Stock goods

    The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
    Size 120 x 45 x 12 mm
  • Spring Pusher Standoff Clamp (D=8mm / L=10mm) Spring Pusher Standoff Clamp (D=8mm / L=10mm) SKU: FV-LATSML
    $28.00

    Stock goods

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Length 10 mm
    Diameter 8 mm
  • Pillar 30x30x150mm Pillar 30x30x150mm SKU: FX-PR30__150
    $42.00

    Stock goods

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Size 30 x 30 x 150 mm
  • Swift-Fix Tool Kit Swift-Fix Tool Kit SKU: FX-TOOLS
    $29.00

    Stock goods

    The Swift-Fix tool kit contains everything you need to assemble and align Swift-Fix components.
  • Kinematic Fixture Plate 300x300 mm (M8) Kinematic Fixture Plate 300x300 mm (M8) SKU: KPT-300__300
    $637.00

    Stock goods

    The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
    Plate Compatibility KB-250/250 
    KB-UNIVL 
  • Spring Pusher Standoff Clamp (D=16mm / L=20mm) Spring Pusher Standoff Clamp (D=16mm / L=20mm) SKU: FX-LATMED
    $38.00

    Stock goods

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Length 20 mm
    Diameter 16 mm
  • Centering Pin Centering Pin SKU: FV-MALE
    $18.00

    Stock goods

    Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
    Thread M4 
  • Standoff Adjustable (M8) Standoff Adjustable (M8) SKU: FX-HEIGHT
    $48.00

    Stock goods

    The adjustable standoff gives maximum flexibility when elevating a part or other fixture components.
    Length 50 mm
    Diameter 16 mm
  • Vee Locator Vee Locator SKU: FX-VEE
    $65.00

    Stock goods

    The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
    Thread M8 
  • Pillar Base Plate Pillar Base Plate SKU: FX-PR30PLATE
    $46.00

    Stock goods

    The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
    Size 130 x 30 mm
  • Pillar 30x30x250mm Pillar 30x30x250mm SKU: FX-PR30__250
    $48.00

    Stock goods

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Size 30 x 30 x 250 mm
  • Pillar 30x30x100mm Pillar 30x30x100mm SKU: FX-PR30__100
    $39.00

    Stock goods

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Size 30 x 30 x 100 mm
  • Pillar 30x30x50mm Pillar 30x30x50mm SKU: FX-PR30__50
    $37.00

    Stock goods

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Size 30 x 30 x 50 mm
  • Standoff Pin (D = 8 mm / L = 10 mm) Standoff Pin (D = 8 mm / L = 10 mm) SKU: FV-SO__PIN
    $11.00

    Stock goods

    The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
    Length 10 mm
    Diameter 8 mm
  • Standoff Magnet  (D = 8 mm / L = 10 mm) Standoff Magnet (D = 8 mm / L = 10 mm) SKU: FV-SO__MAG
    $11.00

    Stock goods

    The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
    Length 10 mm
    Diameter 8 mm
  • Spring Pusher Standoff Clamp (D=20mm / L=20mm) Spring Pusher Standoff Clamp (D=20mm / L=20mm) SKU: FX-LATLGE
    $59.00

    Stock goods

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Length 20 mm
    Diameter 20 mm
    • 1(current)
    • 2
    • 3