Machine Tool

Dial gauge with housing Ø44 mm display with reading 0.25 - 0 - 0.25 mm. Protection class IP65. Resolution: 0.001 mm / .00005"  / Measuring range: ± 0.25 mm / ± .010"

Adapter from D11 to D28 connection to extend the tool holder compatibility of Hexagon touch probes with D11 connection.

Taper shank SK40 for use with Hexagon touch probes with D11 connection and bidirectional probe activation in the machine tool.

Universal connecting cable to transmit measuring signals from Hexagon receivers and tool setters to Fanuc High Speed Skip controls. Shielded cable with M12/F08 plug and open wires. Length: 6 m / 19.7'

Connection cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112 for the operation of touch probes and tool setters with only one cable. Shielded cable with D-SUB plug and open wires. Length: 2 m / 6.6'

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 10 m / 32.8'

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 30 m / 98.4'

Mounting bracket made of stainless steel for mounting and alignment of Hexagon infrared receiver IRR91.50 in machine tools.

Mounting bracket made of stainless steel for mounting and alignment of Hexagon infrared receiver IRR91.42 in machine tools.

Mounting bracket made of stainless steel for mounting and alignment of Hexagon receivers RC-R-100 and RC-R-100-CORE in machine tools.

Extension made of carbon fibre, Ø25 mm, length 230 mm. Used to extend the length of measuring units on machine tools.

Extension made of carbon fibre, Ø25 mm, length 170 mm. Used to extend the length of measuring units on machine tools.

Extension made of carbon fibre, Ø25 mm, length 180 mm. Used to extend the length of measuring units on machine tools.

Extension made of carbon fibre, Ø25 mm, length 280 mm. Used to extend the length of measuring units on machine tools.

Extension made of carbon fibre, Ø25 mm, length 250 mm. Used to extend the length of measuring units on machine tools.

Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X12. Shielded cable with D-SUB HD/M15 plug and open wires. Length: 2 m / 6.6'

Extension cable with M12/F08 and M12/M08 plugs for Hexagon connecting cables. Length: 2 m / 6.6'

Extension cable with M12/F08 and M12/M08 plugs for Hexagon connecting cables. Length: 4 m / 13.1'

BNC Extension cable with BNC-M and BNC-F plugs. Length: 1 m / 3.3'