text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
  1. Strona Główna
  2. Katalog
  3. WMP
  4. Rozwiązania montażowe

Rozwiązania montażowe

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
SWIFT-SET Adapter for HP-S-X3 Stylus Clampings
ID: GB0122-0019
Cena:  €466.00
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.
  • Compatibility:  HP-S-X3 Stylus Clampings
  • Diameter:  40mm
Czas dostawy 10-15 dni
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
SWIFT-SET Adapter for HP-S-X1 Stylus Clampings
ID: GB0122-0008
Cena:  €540.00
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X1 scanning sensor can be built.
  • Compatibility:  HP-S-X1 Stylus Clampings
  • Diameter:  60mm
Czas dostawy 10-15 dni
SWIFT-SET
SWIFT-SET
ID: GB0122-1000
Cena:  €8,140.00
Szybki Podgląd:  Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon’s HP-S-X tactile scanning sensors.
  • Compatibility:  HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
  • Axial Rotation:  0° - 360°
  • Angular Rotation:  0°- 90°
Czas dostawy 10-15 dni
Fixture Baseplate 400x600x12mm (M8)
Fixture Baseplate 400x600x12mm (M8)
ID: FX-BP400__600
Cena:  €1,726.00
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Thread:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Centering Pin
Centering Pin
ID: FV-MALE
Cena:  €20.00
Szybki Podgląd:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Thread:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Baseplate Retaining Screw (M8)
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Cena:  €5.00
Szybki Podgląd:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Thread:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 15 mm)
Standoff (D = 8 mm / L = 15 mm)
ID: FV-SO8__15
Cena:  €9.00
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Length:  15 mm
  • Diameter:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Cena:  €17.00
Szybki Podgląd:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Thread:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix Vision - Full Kit
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Cena:  €2,116.00
Szybki Podgląd:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Thread:  M4
  • Application:  Multisensor CMM
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 600x600x12mm (M8)
Fixture Baseplate 600x600x12mm (M8)
ID: FX-BP600__600
Cena:  €1,821.00
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Thread:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Pin (D = 8 mm / L = 10 mm)
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Cena:  €13.00
Szybki Podgląd:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Length:  10 mm
  • Diameter:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Corner Bracket
Corner Bracket
ID: FV-CNRBRKT
Cena:  €49.00
Szybki Podgląd:  The corner bracket enables the repeatable positioning of parts on a right-angled corner location of an acrylic base plate with reliefs for optical and tactile measurement access.
W magazynie - wysyłka w ciągu 1-2 dni
Universal Clamp (M8)
Universal Clamp (M8)
ID: FX-CLAMP
Cena:  €107.00
Szybki Podgląd:  The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
  • Thread:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Single
Vee Block Single
ID: FV-VEE
Cena:  €29.00
Szybki Podgląd:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
W magazynie - wysyłka w ciągu 1-2 dni
Tension Post (M4)
Tension Post (M4)
ID: FV-POST
Cena:  €15.00
Szybki Podgląd:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Thread:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Basic Kit
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Cena:  €453.00
Szybki Podgląd:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Thread:  M8
  • Application:  CMM, Portable Measuring Arm
W magazynie - wysyłka w ciągu 1-2 dni
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
Acryl Baseplate 200x200x10mm (M4) - Full Pattern
ID: FV-BP200__200F
Cena:  €337.00
Szybki Podgląd:  Acrylic, transparent grid plate with M4 holes and magnetic mounting capability. For optical measuring systems to use on multisensor CMM.
  • Thread:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Cena:  €83.00
Szybki Podgląd:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Thread:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Cena:  €15.00
Szybki Podgląd:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Thread:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Magnet (D = 8 mm / L = 10 mm)
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Cena:  €14.00
Szybki Podgląd:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Length:  10 mm
  • Diameter:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni