As part of our new security upgrades, you are requested to reset your password

CMM

166 Product(s) found

ID: GB0096-2001

Price: €5,270.00

Quick Overview: SWIFT-CHECK is an interim testing artefact, which enables the machine operators to regularly check the performance of any small to mid-size coordinate measuring machine in a few minutes.

CMM Compatibility: GLOBAL S, GLOBAL Lite, TIGO SF, 4.5.4 SF, 7.10.7 SF
Software Compatibility: PC-DMIS (V2016 onwards) , QUINDOS (Q7R18351 onwards)
Run Time: Length Check: 20 Minutes, Ring Check: 5 Minutes, Sphere Check: 5 Minutes, Wrist- / Probe Head Check: 10 Minutes
Dimensions: Length Bar Length = 300 mm, Ring Gauge Diameter = 25 mm, Sphere Diameter = 25 mm

Delivery time 10-15 days

SWIFT-SET

ID: GB0122-1000

Price: €8,140.00

Quick Overview: Swift-Set is a styli setup device, which helps operators to easily and quickly build various styli configurations that fit into Hexagon’s HP-S-X tactile scanning sensors.

Compatibility: HP-S-X5 Stylus Clampings, HP-S-X3 Stylus Clampings (with Adapter), HP-S-X1 Stylus Clampings (with Adapter)
Axial Rotation: 0° - 360°
Angular Rotation: 0°- 90°

Delivery time 10-15 days

SWIFT-SET Adapter for HP-S-X3 Stylus Clampings

ID: GB0122-0019

Price: €466.00

Quick Overview: Swift-Set is a styli setup device, which helps operators to easily and quickly create various styli configurations. With this optional adapter, styli configurations for the HP-S-X3 scanning sensor can be built.

Compatibility: HP-S-X3 Stylus Clampings
Diameter: 40mm

Delivery time 10-15 days

SWIFT-SET Adapter for HP-S-X1 Stylus Clampings

ID: GB0122-0008

Price: €540.00

Compatibility: HP-S-X1 Stylus Clampings
Diameter: 60mm

Delivery time 10-15 days

Standoff (D = 16 mm / L = 100 mm)

ID: FX-SO16__100

Price: €23.00

Quick Overview: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 100 mm
Diameter: 16 mm

In Stock - Despatched 1-2 Days

Spring Nut (M8)

ID: FX-M8SPRGNUT

Price: €31.00

Quick Overview: Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.

In Stock - Despatched 1-2 Days

Pillar Top Plate (10 x M8)

ID: FX-SUB45__120

Price: €54.00

Quick Overview: The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.

Size: 120 x 45 x 12 mm

In Stock - Despatched 1-2 Days

Swift-Fix - Starter Kit

ID: FX-STARTER__KIT

Price: €1,095.00

Quick Overview: The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.

Thread: M8
Application: CMM, Portable Measuring Arm

In Stock - Despatched 1-2 Days

Fixture Baseplate 300x400x12mm (M8)

ID: FX-BP300__400

Price: €884.00

Quick Overview: This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.

Thread: M8

In Stock - Despatched 1-2 Days

Tension Clamp (L = 39 mm)

ID: FX-CTSML

Price: €31.00

Quick Overview: Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.

Thread: Without Thread

In Stock - Despatched 1-2 Days

Vee Locator

ID: FV-FEMALE

Price: €25.00

Quick Overview: Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.

In Stock - Despatched 1-2 Days

Pillar Kit

ID: FX-PILLAR__KIT

Price: €979.00

Quick Overview: The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.

In Stock - Despatched 1-2 Days

Standoff Support (M8)

ID: FX-SO__SUPP

Price: €20.00

Quick Overview: The standoff support cone made of Delrin® has a flat surface for the damage-free positioning of parts.

Length: 10 mm
Diameter: 15 mm

In Stock - Despatched 1-2 Days

Universal Joint

ID: FX-UNI__JOINT

Price: €91.00

Quick Overview: Universal joints allow M8 components to be rotated in 45° increments and locked with the supplied cap screw.

Thread: M8

In Stock - Despatched 1-2 Days

Pillar Base Plate

ID: FX-PR30PLATE

Price: €47.00

Quick Overview: The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.

Size: 130 x 30 mm

In Stock - Despatched 1-2 Days

Pillar 30x30x100mm

ID: FX-PR30__100

Price: €38.00

Quick Overview: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Size: 30 x 30 x 100 mm

In Stock - Despatched 1-2 Days

Pillar 30x30x50mm

ID: FX-PR30__50

Price: €36.00

Quick Overview: Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.

Size: 30 x 30 x 50 mm

In Stock - Despatched 1-2 Days

Standoff (D = 16 mm / L = 30 mm)

ID: FX-SO16__30

Price: €16.00

Quick Overview: Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.

Length: 30 mm
Diameter: 16 mm

In Stock - Despatched 1-2 Days

Standoff Pin M8 (D= 16 mm/L= 20 mm)

ID: FX-SO__PIN

Price: €20.00

Quick Overview: The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.

Length: 20 mm
Diameter: 16 mm

In Stock - Despatched 1-2 Days

Slider Block (M8)

ID: FX-SLIDER

Price: €24.00

Quick Overview: A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.

Thread: M8

In Stock - Despatched 1-2 Days

Added to your shopping cart.

Previous
1(current)
2
3
4
5
Next

Product availability by store location

Hours

CMM

Filters