text.skipToContent text.skipToNavigation
In het kader van onze nieuwe beveiligingsupgrades vragen we u uw wachtwoord opnieuw in te stellen
  1. Home
  2. Catalogus
  3. CMM
  4. Bevestigingen
  5. Overige

Overige

Vee Block Twin
Vee Block Twin
ID: FV-VEETWIN
Prijs:  $55.00
Beknopt overzicht:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Référence:  FV-VEETWIN
Op voorraad - verzending 1-2 dagen
Centering Pin
Centering Pin
ID: FV-MALE
Prijs:  CHF 24,00
Beknopt overzicht:  Centering pin has direct contact with the part and locates it precisely in the right position. It can be used with the flexible vice.
  • Référence:  FV-MALE
  • Filetage:  M4
Op voorraad - verzending 1-2 dagen
Baseplate Retaining Screw (M8)
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
Prijs:  CHF 6,00
Beknopt overzicht:  Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.
  • Référence:  FX-BPRTR
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Cap Screw Set M8 (L = 16 mm)
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Prijs:  CHF 19,00
Beknopt overzicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Référence:  FX-CAPM8/16
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Vee Block Single
Vee Block Single
ID: FV-VEE
Prijs:  CHF 32,00
Beknopt overzicht:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
  • Référence:  FV-VEE
Op voorraad - verzending 1-2 dagen
Articulated Fixture Arm (M8)
Articulated Fixture Arm (M8)
ID: FX-ARM
Prijs:  CHF 142,00
Beknopt overzicht:  The articulated fixture arm has the flexibility to accommodate the most complex positions with only a single locking handle and is typically used with a universal clamp.
  • Référence:  FX-ARM
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Slider Block (M4)
Slider Block (M4)
ID: FV-SLIDER
Prijs:  CHF 18,00
Beknopt overzicht:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Référence:  FV-SLIDER
  • Filetage:  M4
Op voorraad - verzending 1-2 dagen
Thumb Screw (1/4"-20)
Thumb Screw (1/4"-20)
ID: FI-THUMB
Prijs:  CHF 10,00
Beknopt overzicht:  With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
  • Référence:  FI-THUMB
  • Filetage:  1/4" - 20
Op voorraad - verzending 1-2 dagen
Support Stop (1/4"-20)
Support Stop (1/4"-20)
ID: FI-SUP__STOP
Prijs:  CHF 84,00
Beknopt overzicht:  The support stop allows the user to apply a positive clamping force with variable pressure.
  • Référence:  FI-SUP__STOP
  • Filetage:  1/4" - 20
Op voorraad - verzending 1-2 dagen
Cap Screw Set 1/4"-20 (L = 5/8") - 10 pc.
Cap Screw Set 1/4"-20 (L = 5/8") - 10 pc.
ID: FI-CAP1__4-5__8
Prijs:  CHF 20,00
Beknopt overzicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Référence:  FI-CAP1/4-5/8
  • Filetage:  1/4" - 20
Op voorraad - verzending 1-2 dagen
Universal Joint (1/4"-20)
Universal Joint (1/4"-20)
ID: FI-UNI__JOINT
Prijs:  CHF 104,00
Beknopt overzicht:  Universal joints allow 1/4"-20 components to be rotated in 45° increments and locked with the supplied cap screw.
  • Référence:  FI-UNI__JOINT
  • Filetage:  1/4" - 20
Op voorraad - verzending 1-2 dagen
Cap Screw Set 1/4"-20 (L = 3/4") - 10 pc.
Cap Screw Set 1/4"-20 (L = 3/4") - 10 pc.
ID: FI-CAP1__4-3__4
Prijs:  CHF 19,00
Beknopt overzicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Référence:  FI-CAP1/4-3/4
  • Filetage:  1/4" - 20
Op voorraad - verzending 1-2 dagen
Resting Cone (1/4"-20)
Resting Cone (1/4"-20)
ID: FI-CONE
Prijs:  CHF 20,00
Beknopt overzicht:  The 1/4"-20 Resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Référence:  FI-CONE
  • Filetage:  1/4" - 20
Op voorraad - verzending 1-2 dagen
Slider Block (1/4”-20)
Slider Block (1/4”-20)
ID: FI-SLIDER
Prijs:  CHF 24,00
Beknopt overzicht:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Référence:  FI-SLIDER
  • Filetage:  1/4" - 20
Op voorraad - verzending 1-2 dagen
Vee Locator (1/4"-20)
Vee Locator (1/4"-20)
ID: FI-VEE
Prijs:  CHF 72,00
Beknopt overzicht:  The Vee locator fits on the base plate or on top of standoffs, allowing large parts to be positioned.
  • Référence:  FI-VEE
  • Filetage:  1/4" - 20
Op voorraad - verzending 1-2 dagen
Vee Locator
Vee Locator
ID: FV-FEMALE
Prijs:  CHF 33,00
Beknopt overzicht:  Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Référence:  FV-FEMALE
Op voorraad - verzending 1-2 dagen
Cone Adjustable (M4)
Cone Adjustable (M4)
ID: FV-CONEADJ
Prijs:  CHF 22,00
Beknopt overzicht:  The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
  • Référence:  FV-CONEADJ
  • Filetage:  M4
Op voorraad - verzending 1-2 dagen
Cap Screw Set M8 (L = 20 mm)
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Prijs:  CHF 19,00
Beknopt overzicht:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Référence:  FX-CAPM8/20
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen
Flexible Vice
Flexible Vice
ID: FV-SLIDE
Prijs:  CHF 420,00
Beknopt overzicht:  Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
  • Référence:  FV-SLIDE
  • Filetage:  M4
Op voorraad - verzending 1-2 dagen
Resting Cone (M8)
Resting Cone (M8)
ID: FX-CONE
Prijs:  CHF 22,00
Beknopt overzicht:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Référence:  FX-CONE
  • Filetage:  M8
Op voorraad - verzending 1-2 dagen