text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
Swift-Fix Vision - Full Kit
ID: FV-FULLKIT
Cena:  $3,323.46
Szybki Podgląd:  With the Swift-Fix Fullkit all fixture requirements for multisensor CMMs can be met. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FV-FULLKIT
  • Filetage:  M4
  • Application:  Multicapteur MMT
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Gold Kit
ID: FX-GOLD__KIT
Cena:  $3,575.61
Szybki Podgląd:  With its content of 93 components the Swift-Fix Gold Kit is suitable for the construction of larger and complex fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FX-GOLD/KIT
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Silver Kit
ID: FX-SILVER__KIT
Cena:  $2,370.21
Szybki Podgląd:  The Swift-Fix Silver Kit includes 66 components for building fixtures. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FX-SILVER/KIT
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix Vision - Starter Kit
ID: FV-STARTERKIT
Cena:  $1,654.35
Szybki Podgląd:  The Swift-Fix Starterkit contains basic components for fixture requirements of multisensor CMMs. The components are stored in a dedicated case, ensuring individual items are always easy to find.
  • Référence:  FV-STARTERKIT
  • Filetage:  M4
  • Application:  Multicapteur MMT
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 300x400x12mm (M8)
ID: FX-BP300__400
Cena:  $1,303.80
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/400
  • Filetage:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Tension Clamp (L = 39 mm)
ID: FX-CTSML
Cena:  $46.74
Szybki Podgląd:  Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
  • Référence:  FX-CTSML
  • Filetage:  Sans filetage
W magazynie - wysyłka w ciągu 1-2 dni
Vee Block Twin
ID: FV-VEETWIN
Cena:  $66.42
Szybki Podgląd:  The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Référence:  FV-VEETWIN
W magazynie - wysyłka w ciągu 1-2 dni
Standoff (D = 8 mm / L = 20 mm)
ID: FV-SO8__20
Cena:  $13.53
Szybki Podgląd:  Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Référence:  FV-SO8/20
  • Longueur:  20 mm
  • Diamètre:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Hinge Pivot With Handle
ID: FX-PR30HINGE
Cena:  $118.08
Szybki Podgląd:  The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Référence:  FX-PR30HINGE
W magazynie - wysyłka w ciągu 1-2 dni
Tension Clamp (L = 66 mm)
ID: FX-CTMED
Cena:  $46.74
Szybki Podgląd:  Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
  • Référence:  FX-CTMED
  • Filetage:  Sans filetage
W magazynie - wysyłka w ciągu 1-2 dni
Fixture Baseplate 300x300x12mm (M8)
ID: FX-BP300__300
Cena:  $1,093.47
Szybki Podgląd:  This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
  • Référence:  FX-BP300/300
  • Filetage:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Kinematic Support Kit
ID: FX-KINKIT
Cena:  $367.77
Szybki Podgląd:  The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
  • Référence:  FX-KINKIT
W magazynie - wysyłka w ciągu 1-2 dni
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Cena:  $27.06
Szybki Podgląd:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Référence:  FV-SO/PIN
  • Longueur:  10 mm
  • Diamètre:  8 mm
W magazynie - wysyłka w ciągu 1-2 dni
Slider Block (M8)
ID: FX-SLIDER
Cena:  $36.90
Szybki Podgląd:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Référence:  FX-SLIDER
  • Filetage:  M8
W magazynie - wysyłka w ciągu 1-2 dni
Pillar 30x30x200mm
ID: FX-PR30__200
Cena:  $63.96
Szybki Podgląd:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Référence:  FX-PR30/200
  • Taille:  30 x 30 x 200 mm
W magazynie - wysyłka w ciągu 1-2 dni
Slider Block (M4)
ID: FV-SLIDER
Cena:  £16.00
Szybki Podgląd:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Référence:  FV-SLIDER
  • Filetage:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
Cena:  £250.00
Szybki Podgląd:  The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
  • Référence:  FX-KINKITPLUS
  • Plaque adaptable:  KB-UNIVL
W magazynie - wysyłka w ciągu 1-2 dni
Swift-Fix - Basic Kit
ID: FX-BASIC__KIT
Cena:  £432.00
Szybki Podgląd:  The Swift-fix basic kit provides a basic set of components for the fixture construction. The components are delivered clearly and handy arranged in a robust storage box.
  • Référence:  FX-BASIC/KIT
  • Filetage:  M8
  • Application:  MMT, Bras de mesure portables
W magazynie - wysyłka w ciągu 1-2 dni
Spring Clamp (M4)
ID: FV-SPRING
Cena:  £42.00
Szybki Podgląd:  Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
  • Référence:  FV-SPRING
  • Filetage:  M4
W magazynie - wysyłka w ciągu 1-2 dni
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Cena:  £20.00
Szybki Podgląd:  The angle block slider enables users to position elements horizontally on the base plate.
  • Référence:  FV-ANGSLIDER
  • Filetage:  M4
W magazynie - wysyłka w ciągu 1-2 dni