text.skipToContent text.skipToNavigation
W ramach naszych nowych aktualizacji dotyczących bezpieczeństwa prosimy o zresetowanie hasła
  1. Strona Główna
  2. Catalogue
  3. Machine Tool
  4. Accessories

Accessories

Measuring Unit Extension (L = 115 mm / 4.53")
Measuring Unit Extension (L = 115 mm / 4.53")
ID: 41.00-VE115
Cena:  $665.00
Szybki Podgląd: 

Extension made of carbon fibre, Ø25 mm, length 115 mm. Used to extend the length of measuring units on machine tools.
  • Part Number:  41.00-VE115
  • Material:  Carbon Fibre
  • Length:  115
  • Diameter:  25 mm
  • External Thread:  M16x1
Dostawy > 25 dni
Measuring Unit Extension (L = 430 mm / 16.93")
Measuring Unit Extension (L = 430 mm / 16.93")
ID: 41.00-VE430
Cena:  $677.00
Szybki Podgląd: 

Extension made of carbon fibre, Ø25 mm, length 430 mm. Used to extend the length of measuring units on machine tools.
  • Part Number:  41.00-VE430
  • Material:  Carbon Fibre
  • Length:  430
  • Diameter:  25 mm
  • External Thread:  M16x1
Dostawy > 25 dni
Measuring Unit Extension (L = 450 mm / 17.72")
Measuring Unit Extension (L = 450 mm / 17.72")
ID: 41.00-VE450
Cena:  $677.00
Szybki Podgląd: 

Extension made of carbon fibre, Ø25 mm, length 450 mm. Used to extend the length of measuring units on machine tools.
  • Part Number:  41.00-VE450
  • Material:  Carbon Fibre
  • Length:  450
  • Diameter:  25 mm
  • External Thread:  M16x1
Dostawy > 25 dni
Tool Box 35.20-TB
Tool Box 35.20-TB
ID: 35.20-TB
Cena:  $68.00
Szybki Podgląd:  Tool kit for installation and maintenance of Tool Setter TS35.20. Tool box contents see description.
  • Part Number:  35.20-TB
  • Compatibility:  TS35.20
Dostawy > 25 dni
Calibration Set for T-Nut 18 mm (0.70")
Calibration Set for T-Nut 18 mm (0.70")
ID: CALIBRATION SET 18
Cena:  $583.00
Szybki Podgląd:  Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 18
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
Dostawy > 25 dni
Calibration Set for T-Nut 14 mm (0.55")
Calibration Set for T-Nut 14 mm (0.55")
ID: CALIBRATION SET 14
Cena:  $571.00
Szybki Podgląd:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 14
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
Dostawy > 25 dni
Calibration Set for T-Nut 12 mm (0.47")
Calibration Set for T-Nut 12 mm (0.47")
ID: CALIBRATION SET 12
Cena:  $571.00
Szybki Podgląd:  Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
  • Part Number:  CALIBRATION SET 12
  • Mounting:  T-Slot Mounting
  • Sphere Diameter:  30
Dostawy > 25 dni
Taper Shank CAT50
Taper Shank CAT50
ID: D28-CAT50-W
Cena:  $301.00
Szybki Podgląd: 

Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
  • Part Number:  D28-CAT50-W
  • Interface:  D28
Dostawy > 25 dni
Tool Box 35.50-TB
Tool Box 35.50-TB
ID: 35.50-TB
Cena:  $76.00
Szybki Podgląd:  Tool kit for installation and maintenance of Radio-wave Tool Setter RWT35.50. Tool box contents see description.
  • Part Number:  35.50-TB
  • Compatibility:  RWT35.50
Dostawy > 25 dni
Connecting Cable (L = 2 m / 6.6')
Connecting Cable (L = 2 m / 6.6')
ID: 91.50-ST2-X112-DUO
Cena:  $79.00
Szybki Podgląd: 

Connection cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112 for the operation of touch probes and tool setters with only one cable. Shielded cable with D-SUB plug and open wires. Length: 2 m / 6.6'
  • Part Number:  91.50-ST2-X112-DUO
Dostawy > 25 dni
Connecting Cable (L = 10 m / 32.8')
Connecting Cable (L = 10 m / 32.8')
ID: 91.30-ST10
Cena:  $92.00
Szybki Podgląd: 

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 10 m / 32.8'
  • Part Number:  91.30-ST10
Dostawy > 25 dni
Connecting Cable (L = 30 m / 98.4')
Connecting Cable (L = 30 m / 98.4')
ID: 91.30-ST30
Cena:  $223.00
Szybki Podgląd: 

Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 30 m / 98.4'
  • Part Number:  91.30-ST30
Dostawy > 25 dni
Mounting Bracket
Mounting Bracket
ID: 91.50-M
Cena:  $58.00
Szybki Podgląd: 

Mounting bracket made of stainless steel for mounting and alignment of Hexagon infrared receiver IRR91.50 in machine tools.
  • Receiver Compatibility:  IRR91.50
  • Part Number:  91.50-M
Dostawy > 25 dni
Mounting Bracket
Mounting Bracket
ID: 91.30-M
Cena:  $31.00
Szybki Podgląd: 

Mounting bracket made of stainless steel for mounting and alignment of Hexagon infrared receiver IRR91.42 in machine tools.
  • Receiver Compatibility:  IRR91.42
  • Part Number:  91.30-M
Dostawy > 25 dni
Mounting Bracket
Mounting Bracket
ID: 95.51-M
Cena:  $84.00
Szybki Podgląd: 

Mounting bracket made of stainless steel for mounting and alignment of Hexagon receivers RC-R-100 and RC-R-100-CORE in machine tools.
  • Receiver Compatibility:  RC-R-100, RC-R-100-CORE
  • Part Number:  95.51-M
Dostawy > 25 dni
Calibration Ring with Magnetic Base
Calibration Ring with Magnetic Base
ID: 91.00-CR-M
Cena:  $379.00
Szybki Podgląd:  Calibration ring made of hardened steel with an inner diameter of 40 mm. Fixed mounted on a magnetic base with rotary switch for flexible mounting on machine tool tables. For calibration of tactile probes on the machine tool.
  • Part Number:  91.00-CR-M
  • Application:  Tactile Probe Calibration
  • Material:  Steel, hardened
  • Inner Diameter:  40
  • Height:  55
W magazynie - wysyłka w ciągu 1-2 dni
Taper Shank JIS-BT40
Taper Shank JIS-BT40
ID: 6115
Cena:  $301.00
Szybki Podgląd: 

Taper shank JIS BT40 for use with Hexagon touch probes with D11 connection and bidirectional probe activation in the machine tool.
  • Part Number:  6115
  • Interface:  D11
Dostawy > 25 dni
Probe Extension (L = 100 mm / 3.94")
Probe Extension (L = 100 mm / 3.94")
ID: 91.00-V100
Cena:  $280.00
Szybki Podgląd: 

Extension made of stainless steel (Ø50 mm). For mounting between the Hexagon touch probe and the shank, to extend the length. Length: 100 mm / 3.94"
  • Part Number:  91.00-V100
Dostawy > 25 dni
Calibration Pin (D = 6 mm)
Calibration Pin (D = 6 mm)
ID: 6164
Cena:  $126.00
Szybki Podgląd:  Calibration pin (Ø6 mm) made of hardened stainless steel for calibration of laser tool setters on machine tools. Length 50 mm.
  • Part Number:  6164
  • Application:  Laser Tool Setter Calibration
  • Material:  Stainless Steel, hardened
  • Diameter:  6
  • Length:  50
Dostawy > 25 dni
T-Nut 16 mm
T-Nut 16 mm
ID: 5453
Cena:  $16.00
Szybki Podgląd:  T-Nut with internal thread M12. For mounting measuring systems and accessories on the machine tool table.
  • Part Number:  5453
Dostawy > 25 dni