Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Taper shank SK40/CAT40 with metric pull stud thread for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
Straight stylus with M3 thread, ruby ball Ø6 mm, stainless steel stem Ø3 mm, length 22 mm. For use on machine tools. Previous part number: 91.00-T25/6-ST-M3
Quick overview: Stylus with break shaft connection, square stylus tip made of tungsten carbide 10x10 mm stainless steel stem, length 17.5 mm. For tool measurement on turning machines. Previous part number: 21.00-WM17.5
Quick overview: 5-way stylus center made of stainless steel, with external thread M4 for holding up to 5x M4 styli, length 15 mm. Previous part number: 91.00-TK15X15X15-M4
Straight stylus with M3 thread, ruby ball Ø6 mm, stainless steel stem Ø2.8 mm, length 10 mm. For use on machine tools. Previous part number: 91.00-T13/6-ST-M3
Straight stylus with M3 thread, ruby ball Ø6 mm, stainless steel stem Ø4 mm, length 6 mm. For use on machine tools. Previous part number: 91.00-T9/6-ST-M3
Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 5 m / 16.4'
Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 10 m / 32.8'
Ethernet cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded cable with M12/F04 and M12/M04 plugs. Length: 30 m / 98.4'
Qualification sphere (Ø25mm) with 100 mm extension for calibrating laser scanners for machine tools and CMMs. Calibrated to ISO/IEC 17025 and supplied with a certificate.
