Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
Qualification sphere (Ø25mm) with 100 mm extension for calibrating laser scanners for machine tools and CMMs. Calibrated to ISO/IEC 17025 and supplied with a certificate.
Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to Heidenhain controls with control input X113. Shielded cable with D-SUB HD/M15 plug and open wires. Length: 2 m / 6.6'
Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to Heidenhain controls with control input X13. Shielded cable with D-SUB HD/M9 plug and open wires. Length: 2 m / 6.6'
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-nut (22 mm) for mounting on the machine tool table. Set content see description.
Taper shank JIS BT40 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool. Shank Length: 70 mm / 2.75"
