Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Connection cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112 for the operation of touch probes and tool setters with only one cable. Shielded cable with D-SUB plug and open wires. Length: 2 m / 6.6'
Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 10 m / 32.8'
Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 30 m / 98.4'
Calibration set including a calibration sphere (Ø 30 mm) and a magnetic base for mounting on the machine tool. For kit contents, see description.
Previous part number: 3D-FI EICHKUGEL SET1
Calibration set with calibration sphere (Ø 30 mm), extensions, magnetic base and T-nuts for mounting on the machine tool. Set content see description.
Previous part number: 3D-FI EICHKUGEL SET6
Quick overview: Measuring unit clamp adapter made of anodised aluminium for holding up to 4x M4 styli in different angles (1x 0°, 1x 45°, 2x 90°). For use on machine tools. Previous part number: 41.00-KM-M4
Qualification sphere (Ø25mm) with 100 mm extension for calibrating laser scanners for machine tools and CMMs. Calibrated to ISO/IEC 17025 and supplied with a certificate.
