Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Qualification sphere (Ø25mm) with 100 mm extension for calibrating laser scanners for machine tools and CMMs. Calibrated to ISO/IEC 17025 and supplied with a certificate.
Calibration set with calibration sphere (D = 40 mm) and magnetic base for mounting on the machine tool. Content see description.
Previous part number: 3D-FI EICHKUGEL SET5
Calibration set including a calibration sphere (Ø 30 mm) and a magnetic base for mounting on the machine tool. For kit contents, see description.
Previous part number: 3D-FI EICHKUGEL SET3
Calibration set including a calibration sphere (Ø 30 mm) and a magnetic base for mounting on the machine tool. For kit contents, see description.
Previous part number: 3D-FI EICHKUGEL SET2
Calibration set including a calibration sphere (Ø 30 mm) and a magnetic base for mounting on the machine tool. For kit contents, see description.
Previous part number: 3D-FI EICHKUGEL SET1
Calibration set with calibration sphere (Ø 30 mm), extensions, magnetic base and T-nuts for mounting on the machine tool. Set content see description.
Previous part number: 3D-FI EICHKUGEL SET6
Quick overview: Disc stylus made of tungsten carbide Ø37 mm with M4 thread and break shaft made of ceramic. For measuring rotating tools with tool setters on machine tools. Previous part number: 35.10-D37/16-M4
Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded, drag chain capable cable with M12/F08 and D-SUB HD/M15 plug. Length: 10 m / 32.8'
Previous part number: 91.40-ST10-X112-BIDI
Connecting cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112. Shielded cable with M12/F08 and D-SUB HD/M15 plug. Length: 15 m / 49.2'
Previous part number: 91.40-ST15-X112-DUO
Quick overview: Stylus adapter made of stainless steel Ø6.5 mm with break shaft connection and internal thread M4, length 13.5 mm. For use on machine tools. Previous part number: 91.00-TA-M4
Quick overview: Stylus with break shaft connection, square stylus tip made of tungsten carbide 10x10 mm, stainless steel stem, length 26 mm. For tool measurement on turning machines. Previous part number: 21.00-WM26
