Quick Overview: Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
Quick Overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
Quick Overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Quick Overview: Stylus extension with M4 thread, ceramic stem Ø8 mm, stainless steel ends Ø7 mm, length 100 mm. For use on machine tools. Previous part number: 91.00-TV100-KE-M4
Quick Overview: Measuring unit clamp adapter made of anodised aluminium for holding up to 4x M4 styli in different angles (1x 0°, 1x 45°, 2x 90°). For use on machine tools. Previous part number: 41.00-KM-M4
Straight stylus with M2 thread, ruby ball Ø0.2 mm, tungsten carbide stem (stepped) Ø0.15 mm / Ø1 mm, length 9.9 mm. For use on machine tools. Previous part number: 91.00-T10/0.2-HM-M2
Straight stylus with M2 thread, ruby ball Ø3 mm, tungsten carbide stem Ø1.5 mm, length 10 mm. For use on machine tools. Previous part number: 91.00-T11.5/3-HM-M2
Straight stylus with M2 thread, ruby ball Ø0.5 mm, tungsten carbide stem (stepped) Ø0.3 mm / 1 mm, length 9.75 mm. For use on machine tools. Previous part number: 91.00-T10/0.5-HM-M2
Straight stylus with M2 thread, ruby ball Ø1 mm, tungsten carbide stem Ø1 mm, length 15 mm. For use on machine tools. Previous part number: 91.00-T15.5/1-HM-M2
Quick Overview: Stylus adapter made of stainless steel Ø5/7 mm with external thread M3, internal thread M4 and predefined breaking point, length 15 mm. For use on machine tools. Previous part number: 91.00-S-M3/M4
Quick Overview: Stylus adapter made of tungsten carbide Ø7.5 mm with external thread M4 and break shaft, length 9.5 mm. For use on machine tools. Previous part number: 91.00-S-M4
Taper shank DIN ISO 7388 SK30 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Taper shank SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
Taper shank DIN ISO 7388 SK50 for use with Hexagon touch probes with D28 connection. With contact surface in higher surface quality and dimensional accuracy. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
