Quick Overview: Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
Quick Overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
Quick Overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Connection cable to transmit measuring signals from Hexagon receivers to Heidenhain controls with control input X112 for the operation of touch probes and tool setters with only one cable. Shielded cable with D-SUB plug and open wires. Length: 2 m / 6.6'
Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded cable with M12/F08 plug and open wires. Length: 10 m / 32.8'
Universal connecting cable to transmit measuring signals from Hexagon receivers and tool setters to Fanuc High Speed Skip controls. Shielded cable with M12/F08 plug and open wires. Length: 6 m / 19.7'
Universal connecting cable to transmit measuring signals from Hexagon receivers and tool setters to Fanuc High Speed Skip controls. Shielded, drag chain capable cable with PCR-E 20 FS-HDA plug and open wires. Length: 15 m / 49.2'
Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded, drag chain capable cable with M12/F08 plug and open wires. Length: 15 m / 49.2'
Connecting cable to transmit measuring signals from Hexagon receivers and tool setters to machine tool controls. Shielded, drag chain capable with 90°-plug M12/F08 and open wires. Length: 15 m / 49.2'
Connecting cable to transmit measuring signals from Hexagon receivers to machine tool controls. Shielded, drag chain capable cable with M23/F12 plug and open wires. Length: 15 m / 49.2'
Taper shank DIN ISO 7388 SK40 for use with Hexagon touch probes with D20 connection and bidirectional probe activation in the machine tool. Shank Length: 70 mm / 2.75"
Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
