Taper shank CAT50 for use with Hexagon touch probes with D28 connection. For probe activation in machine tools with programmable through-spindle coolant or switchable air blast > 3.5 bar.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-nut (18 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (14 mm) for mounting on the machine tool table. Set content see description.
Quick overview: Calibration set with calibration sphere (D = 30 mm) and T-Nut (12 mm) for mounting on the machine tool table. Set content see description.
Straight stylus with M3 thread, ruby ball Ø2 mm, tungsten carbide stem Ø1 mm, length 40 mm. For use on machine tools. Previous part number: 21.00-T40/2-HM-M3
Straight stylus with M3 thread, ruby ball Ø4 mm, tungsten carbide stem Ø2 mm, length 30 mm. For use on machine tools. Previous part number: 21.00-T30/4-HM-M3
Straight stylus with M4 thread, ruby ball Ø4 mm, stainless steel stem Ø3 mm, length 18 mm. For use on machine tools. Previous part number: 91.00-T20/4-ST-M4-D7
Quick overview: Stylus adapter made of stainless steel Ø4/7 mm, with external thread M4, internal thread M3, length 9 mm. For use on machine tools. Previous part number: 91.00-TA-M4/M3-9
Straight stylus with M4 thread, ruby ball Ø8 mm, stainless steel stem Ø5.5 mm, length 16 mm. For use on machine tools. Previous part number: 91.00-T20/8-ST-M4-D7
Quick overview: 5-way stylus center made of stainless steel, with internal thread M4 for holding up to 5x M4 styli, length 18 mm. For use on machine tools. Previous part number: 91.00-TK-ST-M4
Straight stylus with M3 thread, ruby ball Ø3 mm, tungsten carbide stem Ø1.5 mm, length 40 mm. For use on machine tools. Previous part number: 21.00-T40/3-HM-M3
Quick overview: Stylus adapter made of steel Ø5 mm with external/internal thread M3 and predefined breaking point, length 15 mm. For use on machine tools. Previous part number: 21.00-S-M3/M3
Quick overview: Stylus extension with M3 thread, ceramic stem Ø4 mm, stainless steel ends Ø4 mm, length 40 mm. For use on machine tools. Previous part number: 21.00-TV40-KE-M3
Universal connecting cable to transmit measuring signals from Hexagon receivers and tool setters to Fanuc High Speed Skip controls. Shielded, drag chain capable cable with PCR-E 20 FS-HDA plug and open wires. Length: 15 m / 49.2'
Taper shank DIN 2080 SK50 for use with Hexagon touch probes with D28 connection. For probe activation via preloaded Hexagon pull stud or bidirectional activation in the machine tool.
