text.skipToContent text.skipToNavigation
  • 1(current)
  • 2
  • 3
Znaleziono 102 Produkt(ów)
  • Kinematic Fixture Plate 300x300mm (Plain) Kinematic Fixture Plate 300x300mm (Plain) ID: KPP-300__300
    425,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    The plain kinematic fixture plate can be repeatedly placed in exactly the same position on the top of a pre-mounted kinematic base plate, without the need for manual alignment.
    Kompatybilność płyty KB-250/250 
    KB-UNIVL 
  • Fixture Baseplate 300x400x12mm (M8) Fixture Baseplate 300x400x12mm (M8) ID: FX-BP300__400
    760,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Gwint M8 
  • Tension Clamp (L = 39 mm) Tension Clamp (L = 39 mm) ID: FX-CTSML
    27,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    Tension clamp for quick and easy clamping of parts with low force, without obstructing the measurement access.
    Gwint Without Thread 
  • Vee Locator Vee Locator ID: FV-FEMALE
    22,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    Vee locator made of stainless steel for positioning round and cylindrical parts. It can be used with the flexible vice.
  • Vee Block Twin Vee Block Twin ID: FV-VEETWIN
    36,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Spring Clamp (M8) Spring Clamp (M8) ID: FX-SPRING
    44,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
    Gwint Without Thread 
  • Thumb Screw M8 Thumb Screw M8 ID: FX-THUMB
    9,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
    Gwint M8 
  • Guide Rail (L = 480 mm) Guide Rail (L = 480 mm) ID: FV-GUIDE480
    203,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
    Kompatybilność płyty FV-BP200/200C 
    FV-BP200/200F 
    FV-BP200/200P 
  • Standoff (D = 8 mm / L = 20 mm) Standoff (D = 8 mm / L = 20 mm) ID: FV-SO8__20
    9,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Długość 20 mm 
    Średnica 8 mm 
  • Cone Adjustable (M4) Cone Adjustable (M4) ID: FV-CONEADJ
    11,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
    Gwint M4 
  • Standoff (D = 16 mm / L = 20 mm) Standoff (D = 16 mm / L = 20 mm) ID: FX-SO16__20
    13,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Długość 20 mm 
    Średnica 16 mm 
  • Hinge Pivot With Handle Hinge Pivot With Handle ID: FX-PR30HINGE
    41,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Tension Clamp (L = 66 mm) Tension Clamp (L = 66 mm) ID: FX-CTMED
    27,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
    Gwint Without Thread 
  • Fixture Baseplate 300x300x12mm (M8) Fixture Baseplate 300x300x12mm (M8) ID: FX-BP300__300
    595,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Gwint M8 
  • Standoff (D = 16 mm / L = 100 mm) Standoff (D = 16 mm / L = 100 mm) ID: FX-SO16__100
    20,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Długość 100 mm 
    Średnica 16 mm 
  • Spring Nut (M8) Spring Nut (M8) ID: FX-M8SPRGNUT
    27,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Pillar Top Plate  (10 x M8) Pillar Top Plate (10 x M8) ID: FX-SUB45__120
    47,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
    Wymiar 120 x 45 x 12 mm 
  • Swift-Fix - Starter Kit Swift-Fix - Starter Kit ID: FX-STARTER__KIT
    940,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
    Gwint M8 
    Zastosowanie WMP 
    Przenośne ramiona pomiarowe 
  • Support Stop Support Stop ID: FX-SUP__STOP
    71,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    The support stop allows the user to apply a positive clamping force with variable pressure.
    Gwint M8 
  • Spring Pusher Standoff Clamp (D=8mm / L=10mm) Spring Pusher Standoff Clamp (D=8mm / L=10mm) ID: FV-LATSML
    28,00 €

    W magazynie - wysyłka w ciągu 1-2 dni

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Długość 10 mm 
    Średnica 8 mm 
    • 1(current)
    • 2
    • 3