text.skipToContent text.skipToNavigation
Hexagons COVID-19 Support & Response | Official Statement

Kies uw land of regio

  • 1(current)
  • 2
  • 3
102 product(en) gevonden
  • Vee Block Twin Vee Block Twin ID: FV-VEETWIN
    38,00 €

    Op voorraad - verzending 1-2 dagen

    The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Spring Clamp (M8) Spring Clamp (M8) ID: FX-SPRING
    46,00 €

    Op voorraad - verzending 1-2 dagen

    Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
    Schroefdraad Without Thread 
  • Thumb Screw M8 Thumb Screw M8 ID: FX-THUMB
    9,00 €

    Op voorraad - verzending 1-2 dagen

    With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
    Schroefdraad M8 
  • Guide Rail (L = 480 mm) Guide Rail (L = 480 mm) ID: FV-GUIDE480
    213,00 €

    Op voorraad - verzending 1-2 dagen

    The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
    Basisplaat comptabiliteit FV-BP200/200C 
    FV-BP200/200F 
    FV-BP200/200P 
  • Standoff (D = 8 mm / L = 20 mm) Standoff (D = 8 mm / L = 20 mm) ID: FV-SO8__20
    9,00 €

    Op voorraad - verzending 1-2 dagen

    Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Lengte 20 mm 
    Diameter 8 mm 
  • Cone Adjustable (M4) Cone Adjustable (M4) ID: FV-CONEADJ
    12,00 €

    Op voorraad - verzending 1-2 dagen

    The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
    Schroefdraad M4 
  • Standoff (D = 16 mm / L = 20 mm) Standoff (D = 16 mm / L = 20 mm) ID: FX-SO16__20
    14,00 €

    Op voorraad - verzending 1-2 dagen

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Lengte 20 mm 
    Diameter 16 mm 
  • Hinge Pivot With Handle Hinge Pivot With Handle ID: FX-PR30HINGE
    43,00 €

    Op voorraad - verzending 1-2 dagen

    The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Tension Clamp (L = 66 mm) Tension Clamp (L = 66 mm) ID: FX-CTMED
    28,00 €

    Op voorraad - verzending 1-2 dagen

    Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
    Schroefdraad Without Thread 
  • Fixture Baseplate 300x300x12mm (M8) Fixture Baseplate 300x300x12mm (M8) ID: FX-BP300__300
    625,00 €

    Op voorraad - verzending 1-2 dagen

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Schroefdraad M8 
  • Standoff (D = 16 mm / L = 100 mm) Standoff (D = 16 mm / L = 100 mm) ID: FX-SO16__100
    21,00 €

    Op voorraad - verzending 1-2 dagen

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Lengte 100 mm 
    Diameter 16 mm 
  • Spring Nut (M8) Spring Nut (M8) ID: FX-M8SPRGNUT
    28,00 €

    Op voorraad - verzending 1-2 dagen

    Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Pillar Top Plate  (10 x M8) Pillar Top Plate (10 x M8) ID: FX-SUB45__120
    49,00 €

    Op voorraad - verzending 1-2 dagen

    The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
    Grootte 120 x 45 x 12 mm 
  • Swift-Fix - Starter Kit Swift-Fix - Starter Kit ID: FX-STARTER__KIT
    987,00 €

    Op voorraad - verzending 1-2 dagen

    The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
    Schroefdraad M8 
    Toepassing CMM 
    Draagbare meetarm 
  • Support Stop Support Stop ID: FX-SUP__STOP
    75,00 €

    Op voorraad - verzending 1-2 dagen

    The support stop allows the user to apply a positive clamping force with variable pressure.
    Schroefdraad M8 
  • Spring Pusher Standoff Clamp (D=8mm / L=10mm) Spring Pusher Standoff Clamp (D=8mm / L=10mm) ID: FV-LATSML
    29,00 €

    Op voorraad - verzending 1-2 dagen

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Lengte 10 mm 
    Diameter 8 mm 
  • Spring Pusher Standoff Clamp (D=16mm / L=20mm) Spring Pusher Standoff Clamp (D=16mm / L=20mm) ID: FX-LATMED
    38,00 €

    Op voorraad - verzending 1-2 dagen

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Lengte 20 mm 
    Diameter 16 mm 
  • Kinematic Fixture Plate 300x300 mm (M8) Kinematic Fixture Plate 300x300 mm (M8) ID: KPT-300__300
    709,00 €

    Op voorraad - verzending 1-2 dagen

    The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
    Basisplaat comptabiliteit KB-250/250 
    KB-UNIVL 
  • Swift-Fix - Bronze Kit Swift-Fix - Bronze Kit ID: FX-BRONZE__KIT
    872,00 €

    Op voorraad - verzending 1-2 dagen

    The Swift-Fix Bronze Kit contains 46 components for construction basic fixture assembly. The components are stored in a dedicated case, ensuring individual items are always easy to find.
    Schroefdraad M8 
    Toepassing CMM 
    Draagbare meetarm 
  • Pillar 30x30x150mm Pillar 30x30x150mm ID: FX-PR30__150
    37,00 €

    Op voorraad - verzending 1-2 dagen

    Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
    Grootte 30 x 30 x 150 mm 
    • 1(current)
    • 2
    • 3