text.skipToContent text.skipToNavigation
Nellambito dei nostri nuovi aggiornamenti di sicurezza ti viene richiesto di reimpostare la password
Standoff (D = 20 mm / L = 30 mm)
ID: FX-SO20__30
Prezzo:  16,00 €
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  30 mm
  • Diametro:  20 mm
Disponibile - Spedizione in 1-2 Giorni
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
Prezzo:  17,00 €
Descrizione:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
Prezzo:  17,00 €
Descrizione:  Cap screws are used to mount Swift-Fix components on the base plate.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Standoff Magnet  (D = 16 mm / L = 20 mm)
ID: FX-SO__MAG
Prezzo:  20,00 €
Descrizione:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lunghezza:  20 mm
  • Diametro:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Resting Cone (M8)
ID: FX-CONE
Prezzo:  20,00 €
Descrizione:  The M8 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Angle Block Slider (M4)
ID: FV-ANGSLIDER
Prezzo:  19,00 €
Descrizione:  The angle block slider enables users to position elements horizontally on the base plate.
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Pillar 30x30x100mm
ID: FX-PR30__100
Prezzo:  38,00 €
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 100 mm
Disponibile - Spedizione in 1-2 Giorni
Pillar 30x30x50mm
ID: FX-PR30__50
Prezzo:  36,00 €
Descrizione:  Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
  • Dimensione:  30 x 30 x 50 mm
Disponibile - Spedizione in 1-2 Giorni
Standoff Pin (D = 8 mm / L = 10 mm)
ID: FV-SO__PIN
Prezzo:  13,00 €
Descrizione:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lunghezza:  10 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Standoff Pin M8 (D= 16 mm/L= 20 mm)
ID: FX-SO__PIN
Prezzo:  20,00 €
Descrizione:  The standoff pin enables parts to be both positioned and supported without obstructing the measurement access.
  • Lunghezza:  20 mm
  • Diametro:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Slider Block (M8)
ID: FX-SLIDER
Prezzo:  24,00 €
Descrizione:  A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetto:  M8
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 16 mm / L = 50 mm)
ID: FX-SO16__50
Prezzo:  17,00 €
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  50 mm
  • Diametro:  16 mm
Disponibile - Spedizione in 1-2 Giorni
Kinematic Fixture Plate 500x500 mm (M8)
ID: KPT-500__500
Prezzo:  1.780,00 €
Descrizione:  The kinematic fixture plate can be placed in exactly the same position without the need for manual alignment. It is placed on top of a pre-mounted kinematic base plate.
  • Compatibilità piastra di fissaggio:  KB-400/400, KB-UNIVL
Disponibile - Spedizione in 1-2 Giorni
Vee Block Single
ID: FV-VEE
Prezzo:  29,00 €
Descrizione:  The single Vee block can be used with the flexible vice. It can also be used to centre parts diagonally in combination with the twin Vee.
Disponibile - Spedizione in 1-2 Giorni
Tension Post (M4)
ID: FV-POST
Prezzo:  15,00 €
Descrizione:  This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Standoff (D = 20 mm / L = 50 mm)
ID: FX-SO20__50
Prezzo:  17,00 €
Descrizione:  Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
  • Lunghezza:  50 mm
  • Diametro:  20 mm
Disponibile - Spedizione in 1-2 Giorni
Slider Block (M4)
ID: FV-SLIDER
Prezzo:  15,00 €
Descrizione:  A slider block opens up a much greater choice of positions for fixtures than that offered by the standard plate.
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
Standoff Magnet  (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
Prezzo:  14,00 €
Descrizione:  The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
  • Lunghezza:  10 mm
  • Diametro:  8 mm
Disponibile - Spedizione in 1-2 Giorni
Resting Cone (M4)
ID: FV-CONE
Prezzo:  13,00 €
Descrizione:  The M4 resting cone made of Delrin® is shaped to precisely position the part and to reduce the risk of any damage.
  • Filetto:  M4
Disponibile - Spedizione in 1-2 Giorni
3-Jaw Chuck with Flange (Stainless Steel / D = 125 mm)
ID: FC-125SS3
Prezzo:  1.160,00 €
Descrizione:  Three-jaw chuck made from stainless steel with an outside diameter of 125 mm. For inside and outside clamping of parts on coordinate measuring machines.
  • Diametro esterno griffe (D1):  125mm
  • Campo di serraggio esterno (A):  1 - 126mm
  • Campo di serraggio interno (I):  32 - 122mm
  • Materiale:  Acciaio inossidabile
  • Serrraggio:  M4 / M8
Disponibile - Spedizione in 1-2 Giorni