text.skipToContent text.skipToNavigation
Hexagons COVID-19 Support & Response | Official Statement

Scegliere il paese o la regione

  • 1(current)
  • 2
  • 3
159 Prodotto/i trovato/i
  • HA-M-100 Probe Extension M8 (L = 100 mm) HA-M-100 Probe Extension M8 (L = 100 mm) ID: 03969066
    190,00 €

    Disponibile - Spedizione in 1-2 Giorni

    M8/M8 extension made of aluminium and stainless steel with a length of 100 mm.
    Collegamento M8 / M8 
    Lunghezza (L) 100 mm
    Materiale Alluminio / Acciaio inossidabile 
  • HA-TT-50 Probe Extension TKJ (L = 50 mm) HA-TT-50 Probe Extension TKJ (L = 50 mm) ID: 03969360
    503,00 €

    Disponibile - Spedizione in 1-2 Giorni

    TKJ extension made of aluminium and stainless steel with a length of 50 mm.
    Collegamento TKJ / TKJ 
    Lunghezza (L) 50 mm
    Materiale Alluminio / Acciaio inossidabile 
  • HA-TT-300C Probe Extension TKJ (L = 300 mm) HA-TT-300C Probe Extension TKJ (L = 300 mm) ID: 03969364
    1.482,00 €

    Disponibile - Spedizione in 1-2 Giorni

    TKJ extension made of carbon fibre and stainless steel with a length of 300 mm
    Collegamento TKJ / TKJ 
    Lunghezza (L) 300 mm
    Materiale Fibra di carbonio / Acciaio inossidabile 
  • HR-X1-P-SF Stylus Changer Port HR-X1-P-SF Stylus Changer Port ID: M00-114-167-000
    342,00 €

    Disponibile - Spedizione in 1-2 Giorni

    Stylus changer port with cover for scanning sensors HP-S-X1S, HP-S-X1H and HP-S-X1C.
    Numero di porte
    Sensore compatibile HP-S-X1S 
    HP-S-X1H 
    HP-S-X1C 
  • Vee Block Twin Vee Block Twin ID: FV-VEETWIN
    38,00 €

    Disponibile - Spedizione in 1-2 Giorni

    The twin Vee block can be used with the flexible vice to position and hold parts in place. It can also be used to centre parts diagonally in combination with the single Vee.
  • Spring Clamp (M8) Spring Clamp (M8) ID: FX-SPRING
    46,00 €

    Disponibile - Spedizione in 1-2 Giorni

    Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
    Filetto Without Thread 
  • Thumb Screw M8 Thumb Screw M8 ID: FX-THUMB
    9,00 €

    Disponibile - Spedizione in 1-2 Giorni

    With a thumb screw, slider blocks and pillars can be securely mounted on the base plate.
    Filetto M8 
  • Guide Rail (L = 480 mm) Guide Rail (L = 480 mm) ID: FV-GUIDE480
    213,00 €

    Disponibile - Spedizione in 1-2 Giorni

    The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
    Compatibilità piastra di fissaggio FV-BP200/200C 
    FV-BP200/200F 
    FV-BP200/200P 
  • Standoff (D = 8 mm / L = 20 mm) Standoff (D = 8 mm / L = 20 mm) ID: FV-SO8__20
    9,00 €

    Disponibile - Spedizione in 1-2 Giorni

    Standoff made of aluminium, with M4 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Lunghezza 20 mm 
    Diametro 8 mm 
  • Cone Adjustable (M4) Cone Adjustable (M4) ID: FV-CONEADJ
    12,00 €

    Disponibile - Spedizione in 1-2 Giorni

    The M4 adjustable cone made of Delrin® is shaped to reduce direct contact with delicate parts and can be adjusted in height.
    Filetto M4 
  • Standoff (D = 16 mm / L = 20 mm) Standoff (D = 16 mm / L = 20 mm) ID: FX-SO16__20
    14,00 €

    Disponibile - Spedizione in 1-2 Giorni

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Lunghezza 20 mm 
    Diametro 16 mm 
  • Hinge Pivot With Handle Hinge Pivot With Handle ID: FX-PR30HINGE
    43,00 €

    Disponibile - Spedizione in 1-2 Giorni

    The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
  • Tension Clamp (L = 66 mm) Tension Clamp (L = 66 mm) ID: FX-CTMED
    28,00 €

    Disponibile - Spedizione in 1-2 Giorni

    Tension clamp for quick and easy clamping of parts with medium force, without obstructing the measurement access.
    Filetto Without Thread 
  • Fixture Baseplate 300x300x12mm (M8) Fixture Baseplate 300x300x12mm (M8) ID: FX-BP300__300
    625,00 €

    Disponibile - Spedizione in 1-2 Giorni

    This fixture base plate can be connected side-by-side with other base plates with the same size. M8 holes and alpha numeric identification allowing fixtures to be re-built easily.
    Filetto M8 
  • Standoff (D = 16 mm / L = 100 mm) Standoff (D = 16 mm / L = 100 mm) ID: FX-SO16__100
    21,00 €

    Disponibile - Spedizione in 1-2 Giorni

    Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
    Lunghezza 100 mm 
    Diametro 16 mm 
  • Spring Nut (M8) Spring Nut (M8) ID: FX-M8SPRGNUT
    28,00 €

    Disponibile - Spedizione in 1-2 Giorni

    Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
  • Pillar Top Plate  (10 x M8) Pillar Top Plate (10 x M8) ID: FX-SUB45__120
    49,00 €

    Disponibile - Spedizione in 1-2 Giorni

    The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
    Dimensione 120 x 45 x 12 mm 
  • Swift-Fix - Starter Kit Swift-Fix - Starter Kit ID: FX-STARTER__KIT
    987,00 €

    Disponibile - Spedizione in 1-2 Giorni

    The Swift-fix Starterkit contains a base plate and a set of basic components for the fixture construction. The components are stored in a dedicated case, ensuring individual items are always easy to find.
    Filetto M8 
    Applicazione CMM 
    Bracci di misura portatili 
  • Support Stop Support Stop ID: FX-SUP__STOP
    75,00 €

    Disponibile - Spedizione in 1-2 Giorni

    The support stop allows the user to apply a positive clamping force with variable pressure.
    Filetto M8 
  • Spring Pusher Standoff Clamp (D=8mm / L=10mm) Spring Pusher Standoff Clamp (D=8mm / L=10mm) ID: FV-LATSML
    29,00 €

    Disponibile - Spedizione in 1-2 Giorni

    The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
    Lunghezza 10 mm 
    Diametro 8 mm 
    • 1(current)
    • 2
    • 3