Kinematic Base for Fixture Plate 500x500mm
ID: KB-400__400
€ 720,00
Disponibile - Spedizione in 1-2 Giorni
The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
Compatibilità piastra di fissaggio |
KPP-500/500 KPT-500/500 |
Kinematic Base for Fixture Plate 400x400mm
ID: KB-300__300
€ 555,00
Disponibile - Spedizione in 1-2 Giorni
The kinematic base plate remains on the machine and ensures accurate, fast and highly repeatable placement of kinematic fixture plates without manual alignment.
Compatibilità piastra di fissaggio |
KPP-400/400 KPT-400/400 |
Guide Rail (L = 480 mm)
ID: FV-GUIDE480
€ 203,00
Disponibile - Spedizione in 1-2 Giorni
The base plate guide rail can align acrylic base plates on the front, side or rear of the measuring envelope of a multisensor CMM.
Spring Pusher Standoff Clamp (D=8mm / L=10mm)
ID: FV-LATSML
€ 28,00
Disponibile - Spedizione in 1-2 Giorni
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
Lunghezza |
10 mm |
Diametro |
8 mm |
Standoff Magnet (D = 8 mm / L = 10 mm)
ID: FV-SO__MAG
€ 11,00
Disponibile - Spedizione in 1-2 Giorni
The standoff magnet ensures the reliable and repeatable holding of parts made from ferromagnetic metals and alloys, all while maximising accessibility.
Lunghezza |
10 mm |
Diametro |
8 mm |
Tension Post (M4)
ID: FV-POST
€ 12,00
Disponibile - Spedizione in 1-2 Giorni
This tension post is for on optical measuring machines. It is used in combination with tension and spring clamps and can be mounted on other Swift-Fix M4 elements.
Spring Pusher Standoff Clamp (D=16mm / L=20mm)
ID: FX-LATMED
€ 36,00
Disponibile - Spedizione in 1-2 Giorni
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
Lunghezza |
20 mm |
Diametro |
16 mm |
Spring Pusher Standoff Clamp (D=20mm / L=20mm)
ID: FX-LATLGE
€ 51,00
Disponibile - Spedizione in 1-2 Giorni
The lateral clamp comes with a tapered pressure button for easy positioning against a location face.
Lunghezza |
20 mm |
Diametro |
20 mm |
Flexible Vice
ID: FV-SLIDE
€ 223,00
Disponibile - Spedizione in 1-2 Giorni
Highly versatile, thanks to different support elements the flexible vice can hold a wide variety of parts in position.
Pillar 30x30x100mm
ID: FX-PR30__100
€ 32,00
Disponibile - Spedizione in 1-2 Giorni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Dimensione |
30 x 30 x 100 mm |
Kinematic Support Kit
ID: FX-KINKIT
€ 216,00
Disponibile - Spedizione in 1-2 Giorni
The content of this kit is required to use kinematic fixture plates on the CMMs 4.5.4 SF and 7.10.7 SF.
Kinematic Support Kit Plus
ID: FX-KINKITPLUS
€ 230,00
Disponibile - Spedizione in 1-2 Giorni
The Kinkit Plus can be used with the universal kinematic base plate. It allows to use more than one size of kinematic fixture plate.
Spring Clamp (M8)
ID: FX-SPRING
€ 44,00
Disponibile - Spedizione in 1-2 Giorni
Spring Clamps are used to clamp parts with low force without obstructing the measurement access.
Slider Block (M8)
ID: FX-SLIDER
€ 21,00
Disponibile - Spedizione in 1-2 Giorni
A slider block enables a much greater choice of positions for fixtures than that offered by the standard plate.
Cap Screw Set M8 (L = 20 mm)
ID: FX-CAPM8__20
€ 14,00
Disponibile - Spedizione in 1-2 Giorni
Cap screws are used to mount Swift-Fix components on the base plate.
Universal Clamp (M8)
ID: FX-CLAMP
€ 92,00
Disponibile - Spedizione in 1-2 Giorni
The universal clamp is designed for holding parts with complex shapes, such as sheet metal panels or tubes, in position.
Angle Block Slider (M4)
ID: FV-ANGSLIDER
€ 16,00
Disponibile - Spedizione in 1-2 Giorni
The angle block slider enables users to position elements horizontally on the base plate.
Cap Screw Set M8 (L = 16 mm)
ID: FX-CAPM8__16
€ 14,00
Disponibile - Spedizione in 1-2 Giorni
Cap screws are used to mount Swift-Fix components on the base plate.
Standoff (D = 20 mm / L = 20 mm)
ID: FX-SO20__20
€ 13,00
Disponibile - Spedizione in 1-2 Giorni
Standoff made of aluminium, with M8 thread. It is used for lifting parts or for attaching other Swift-Fix components to achieve the required height.
Lunghezza |
20 mm |
Diametro |
20 mm |
Baseplate Retaining Screw (M8)
ID: FX-BPRTR
€ 5,00
Disponibile - Spedizione in 1-2 Giorni
Retaining screws secure base plates on the machine table and make it simple to mount multiple plates next to each other.