Hexagons COVID-19 Support & Response | Official Statement
Scegliere il paese o la regione
Europe
- Austria
- Belgium
- Croatia
- Czech Republic
- Denmark
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Lithuana
- Luxembourg
- Latvia
- Netherlands
- Norway
- Poland
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- United Kingdom
Americas
- United States
28,00 €
Disponibile - Spedizione in 1-2 Giorni
Adding spring nuts to a pillar provides greater positioning flexibility when vertically mounting elements.
882,00 €
Disponibile - Spedizione in 1-2 Giorni
The pillar kit contains a wide range of products to add stability and height when horizontally mounting Swift-Fix elements.
32,00 €
Disponibile - Spedizione in 1-2 Giorni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Dimensione | 30 x 30 x 50 mm |
40,00 €
Disponibile - Spedizione in 1-2 Giorni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Dimensione | 30 x 30 x 200 mm |
49,00 €
Disponibile - Spedizione in 1-2 Giorni
The pillar top plate enables the mounting of additional Swift-Fix components on top of a Swift-Fix pillar.
Dimensione | 120 x 45 x 12 mm |
43,00 €
Disponibile - Spedizione in 1-2 Giorni
The pillar base plate is required to fix a pillar on the CMM table or a fixture base plate.
Dimensione | 130 x 30 mm |
37,00 €
Disponibile - Spedizione in 1-2 Giorni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Dimensione | 30 x 30 x 150 mm |
34,00 €
Disponibile - Spedizione in 1-2 Giorni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table.
Dimensione | 30 x 30 x 100 mm |
43,00 €
Disponibile - Spedizione in 1-2 Giorni
Pillars are used to horizontally mount Swift-Fix elements. It adds both stability and height and can be fixed to either the base plate or the machine table. Delivery without pillar base plate (FX-PR30PLATE).
Dimensione | 30 x 30 x 250 mm |
43,00 €
Disponibile - Spedizione in 1-2 Giorni
The hinge pivot is used to set up two pillars at variable angles. This gives high flexibility in setting up larger fixtures.
Aggiunto al tuo carrello.
Disponibilità del prodotto per località dello store
Ore